Top Nato Rail Handle

SMALLRIG Camera Cage Kit Master Kit for Sony Alpha 7S III / A7S III / A7S3 with HDMI Cable Clamp NATO Rail NATO Top Handle - 3009

  • 【MASTER KIT FOR SONY A7S】SmallRig Camera Cage Kit 3009 is especially designed for Sony Alpha 7S III A7S III A7S3. The kit includes an aluminum....
  • 【FORMFITTING FULL CAGE】Made of premium aluminium alloy, the included cage is a solid piece of metal that is highly resistant to oxidation and....
  • 【HDMI CABLE CLAMP】The HDMI clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins, which prevents the camera's HDMI....
  • 【NATO RAIL & NATO TOP HANDLE】The NATO rail attaches to the top of the cage using two 1/4"-20 screws, and the top handle quickly mounts on the....
  • 【TOP RECOMMENDATION】When working with the camera field monitors, you could fix it to the top of cage kit 3009 with SMALLRIG Adjustable Monitor....
Check Stock

SMALLRIG Monitor Cage for Atomos Shogun Ninja Assassin - 1788

  • It’s only compatible for Atomos Shogun and Ninja Assassin (Shogun Inferno, Shogun Flame, Ninja Inferno, Ninja Flame, Shogun Studio and other monitors CAN NOT be used on this cage).
  • This device comes with arrays of 1/4″-20 & 3/8″-16 accessories mounting holes for extended functions.
  • A NATO rail on each end of the top for attaching NATO rail clamps.
  • anti-off device to prevent the SSD card from sliding.
  • equipped with a NATO rail on the bottom to attach NATO rigs.
  • Enable an access to mount the SmallRig sunhood for Atomos Shogun and Ninja Assassin Monitor.
  • Package includes: 1 * monitor cage, 1 * cable clamp, 2 * 1/4″-20 screws.
Check Stock

SMALLRIG Lightweight Top Plate for BMPCC 4K & 6K - APT2510

  • 【FOR BMPCC 4K & 6K】SMALLRIG APT2510 is designed to mountarious accessories such as a monitor or top handle on your Blackmagic Design Pocket Cinema....
  • 【ANTI-TWIST】The multifunctional top plate for BMPCC 4K & 6K firmly mounts to the camera using a 1/4”-20 screw and features an anti-twist....
  • 【MOUNTING POINTS】The plate features a variety of mounting options including 1/4”-20 and 3/8”-16 holes, two locating holes for ARRI standard,....
  • 【SINGLE 15MM ROD CLAMP】The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available....
  • 【BUILT IN NATO RAIL & COLD SHOE】The plate also includes a built-in NATO rail, two integrated shoe mounts for additional mounting options. An Allen....
Check Stock

SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071

  • ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
  • ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
  • ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
  • ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check Stock

[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203

  • ...d 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
  • 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
  • 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “SmallRig Mount for Samsung T5 SSD 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are exclusively designed for BMPCC 4K & 6K.
Check Stock

SMALLRIG Camera NATO Handle Top Handle Grip with Anti-Off Designed Cold Shoe Mount and Built-in Hex Spanner for DSLR Camera, Camera Cage - HTN2362

  • 【QR NATO HANDLE】SmallRig Nato Handle grip is designed to provide a comfortable handheld use for accessory such as monitor, microphone, light and magic arm. It is compatible with SmallRig Camera Cage such as SmallRig2203, SmallRig2254, SmallRig1889.
  • 【ROTATING 360° AND ANTI-OFF DESIGN】The quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side. The twist handle is equipped with two cold shoes. One of them in front features an anti-off button to protect your setup from slipping off.
  • 【BUILT-IN SPANNER】The top handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. So that makes it very easy to use for balancing the camera for handheld use.
  • 【ACCESSORY THREADS】The handle features multiple 1/4"-20 and locating holes for ARRI for accessory attachment, such as SmallRig Monitor Mount BSE2294, BSE2346 and Ballhead 1135.
  • 【COMFORTABLE GRIP】SmallRig HTN2362 integrates with natural rosewood without any painting, which could make it more comfortable to use and provide a comfortable handheld shooting for cameramen.
Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

  • ...he cage is made of premium aluminum alloy, with matte surface and strong oxygen resistance..
  • 【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc..
  • 【FEATURED RECOMMENDATIONS】It features a NATO rail and multiple 1/4" threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI & USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus rod clamp 3276. Its bottom is compatible with dual rod clamp 1943, ensuring the distance between the dual rods and the center of the lens is 85mm, and allowing installing lens support..
  • 【SWEET DESIGN】Strap slots are included to add a wrist strap or neck strap for your camera to prevent dropping. Besides, with built-in magnetic suction design, the included screwdriver is ready for your assembly without fear of loss..
Check Stock

NICEYRIG Cage for Canon 5D 5DS Mark IV III II Full DSLR Camera Cage with QR Plate for Arca Swiss and NATO Rail Cold Shoe - 267

  • [COMPABILITY] Niceyrig cage 267 is especially designed for Canon 5Ds 5D Mark IV III II to protect your camera body without obstructing any buttons and....
  • [MULTI MOUNTING POINTS] Plenty of 1/4’’-20 and 3/8’’-16 threaded holes and cold shoe on the top to allow kinds of accessories like top handle,....
  • [QUICK SWITCH] Built-in QR plates for Arca Swiss on the bottom and left side, you can quickly achieve attach and release, which allows you transfer....
  • [SUPPORT NATO ACCESSORIES] Features NATO rail on the right side that enable you to mount quick release accessories with NATO clamp, such as Niceyrig....
  • [SOLID QUALITY] Made of aluminum alloy, sturdy and lightweight.
Check Stock

ALZO Smoothy Zoom Focus Assist - works like follow focus - adapts to many different camera lens

  • 【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching other SmallRig accessories such as NATO Side Handle 2187, Super Clamp Mount 1124 to improve the compactness of your equipment..
  • 【MULTIPLE SHOOTING SCENES】The installation angle of this follow focus can be adjusted, supports handheld, tripod mounted and other shooting scenarios. Furthermore, using the included snap-on gear ring belt and interchangeable M0.8 gears (standard M0.8-43T gear, optional model: M0.8-65T gear 3200, M0.8-38T gear 3285) enables well compatible with different diameters of lenses and achieves diversified shooting..
  • 【Additional Gears】You could choose additional gears to help achieve a better shooting experience: SmallRig Seamless Focus Gear Ring 3291/3292/3293/3294/9295/3296.
Check Stock

NATO Handbook

  • Extensive Compatibility : Dual ball heads with magic arm features for NATO Clamp and 1/4"-20 Screws (With Retractable Pins) on the end for DSLR cameras, action cameras, LED lights, flashes, etc..
  • Anti-twist Retractable Pins : Magic arm with the retractable Pins on each end to prevent twisting. The locating pins are retractable spring designs. You can mount it on the accessories with 1/4" locating holes and NATO Rail or with a 1/4" threaded hole and NATO Rail..
  • 360° Flexible Adjustment : The camera magic arm with an adjustable thumb lever could be adjusted in different positions and angles via both the ballhead and ballhead clamp. It comes with a small magnetic wrench at the bottom to tighten the thumbwheels..
  • 12Ib Payload : The max load capacity of the magic arm is 12Ib (5.5kg). Firmly fix your field monitor, LED lights, audio recorders, etc. Each ballhead is 0.79 inch (20 mm) in diameter. This item weighs only 0.2 Ib (91g) , making it easy to carry around and store..
  • Durable and Stable : The magic arm holder is made of CNC-processed aluminum alloy and stainless steel, which is durable. The ball head with rubber rings is more stable. The rubber pads on each end protect your device from scratching..
Check Stock

Heavy Duty Flag of NATO 3x5 Ft,Longest Lasting Nylon 210D|Embroidered Compass Rose Four Rows Stitching Fly Ends|North Atlantic Treaty Org Flags Decoration Gift Yard House Alliance Banner

  • Compatibility: SmallRig NATO Top Handle 3766 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for any accessories features NATO Rail, can be quickly mounted on the side of the cage via a NATO clamp.
  • Lightweight Only 124g: Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone.
  • 5 Built-in Cold Shoe Mounts: It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories.
  • Mounting Points: SmallRig Camera Grip has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble.
  • Related Products: 3/8"-16 locating holes for ARRI standard support Monitor Mount 2903, 2348 to attach monitors.
  • 1/4"-20 threaded holes support Magic Arm 2070 for monitors.
Check Stock

NICEYRIG Camera Cage Kit for Sony A7RIII/ A7RIV/ A7IV/ A7III/ A7SIII/ A7RII/ A7SII/ A7II/ A9, with Cheese Top Handle and Cable Lock Clamp - 190

  • This light weight cage is compatible with A7 IV, III, II series to protect camera damaging. SD card slot, battery compartment, and all camera controls are accessed..
  • The built-in cold shoe on the top allows to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc. Rosette at right side is provided to mount compatible with ARRI rosette handgrip for handheld shooting..
  • HDMI clamp in the upper left corner to organize your HDMI cable. HDMI lock mounting interface to protect the camera HDMI port. A NATO rail is at left side. It is designed to mount nato handle and other NATO compatible accessories quick release. The plate at the bottom of the cage enables you to attach an optional Raiser Block applicable arca swiss compatible with manfrotto plate..
  • This DSLR camera cheese top handle comes with standard cold shoe, which bases on the top to mount magic arm, camera monitor, flash light, led light, dslr microphone, wireless gear, EVF mount. Plenty of 1/4"-20 and 3/8"-16 threaded holes on the compact of the cage provide you a wide range of flexibility in attaching accessories such as microphone, monitor, sound recorders, top handle, EVF mount, tripod plate, cheese plate..
  • Made of aluminum alloy, durable and lightweight..
Check Stock