Top Natural Gas Meter

BTMETER BT-5800G Ammonia Gas Detector Sensor, Test for 0~100 PPM Nh3 Monitor Gauge with Temperature Humidity Tester

  • ✅【High Range Ammonia Gas Detector】Measures ammonia gas 0 ~ 100 PPM, ammonia gas resolution 0.1 PPM, accuracy +/- 2%. Measures ambient temperature from -10 ~ 50 ℃, ℃/℉ switchable.
  • ✅【Ammonia & Temp & Humidity Meter】In a humid, warm environment, ammonia gas is produced faster.Therefore, while detecting ammonia gas, you should also keeping track of the temperature (℃/℉) and humidity..
  • ✅【Tripod Hole for Mounting】Assembled with electrochemical cell sensor for sensitive measurement. With a tripod mount port so you can mount the meter and have it measure ammonia (NH3) Gas Density continuously, keep track of the gas changing in the same spot. Perfect ammonia air detector for poultry farms, horse stables, livestock.
  • ✅【Rechargeable Ammonia Air Gauge】The included USB cable can be connected to the plug for charging. Built with green / red charging indicator light. Remaining power indicator, Auto / Manual power off optional to save your battery..
  • ✅【Alarm Indicator Light】AL1 and AL2 alarm limit values are adjustable. Slow light flash and buzzer indicates alarm level “AL1” reached, Rapid light flash and buzzer indicates alarm level “AL2” reached.This handheld Ammonia detector portable and comes with storage case for testin....
Check Stock

Oxygen Gas Liter Flow Meter Measures 0-8LPM by Tina's Homecare

  • The Oxygen Liter Meter is a small, lightweight device that can be used to quickly verify the flow of gas..
  • Reads 0-8 liters per minute by just attaching your supply line to the bottom and holding in the upright vertical position and locating the center of the ball..
  • This is a great way to verify your home oxygen equipment is accurately dispensing the proper amount of oxygen!.
  • The Liter Meter is only to be used for a quick assessment of the flow of gas from your oxygen concentrator or regulator. Please note this device only verifies the flow and not the quality or purity of the gas..
Check Stock

GasSaf Propane Tank Gas Gauge Leak Detector - Universal for QCC1 Type1 Propane Tank Gas Pressure Meter(2-PCS)

  • 1.Compatible with all appliances with a QCC1 / Type1 connection 20 lb to 40 lb propane tanks.
  • 2.Monitors fuel level without removing the tank. color coded dial for allowing you to see at a glance when your propane level is low,here are three levels.
  • 3.With leak detection function, if the leak is detected, the instrument will limit the flow to protect your safety.
  • 4.High precision meter , high quality brass, can perfectly provide oven, oirtight connection between RV and tank, very durable and sturdy..
  • 5.Coming with dust cover. No tools required and easy to install with handheel grip for tightening. Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, fire pit table, turkey fryer and more propane appliances..
Check Stock

Dual Output Argon/CO2 Gas Regulator Flow Meter for TIG MIG Welding 10-60 SFCH 0-4500 PSI CGA 580 Inlet Connection 5/8 x 18 RH Outlet Fitting

  • 【CGA-580 Bottle Inlet Connection】The CGA-580 Bottle Connection fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any....
  • 【Outlet Connection】The welding gas regulator applicable for female 9/16" x 18 nut or male 5/8" x 18 fitting, equipped with 1/4" Hose barbed....
  • 【Precise &Fast】0-4500 PSI. The high pressure gauge allows you to view how much gas is left in the argon cylinder.The CO2 flow meter is adjustable....
  • 【Premium Quality】The argon gas flow meter is made of high-quality brass, and strict tested to guarantee long life. It can greatly prevent gas....
  • 【Perfect for MIG and TIG Welding 】The Argon CO2 welding regulator compatible with kinds of gases, it will be an economic alternative for demanding....
Check Stock

testo 300 I Residential and Commercial Combustion Analyzer Kit & 510 Digital Manometer I Dual-Port Differential Pressure Meter for air Conditioning Systems and Ventilation ducts

  • Product 1: Efficient: The combustion testing tool reliably measures the carbon monoxide and O2 level of furnaces and boilers, as well as temperature, draft and differential pressure.
  • Product 1: Durable: The flue gas meter is equipped with an extremely sensitive CO and O2 sensor with up to 6 years of life expectancy and a measuring range up to 4,000 ppm.
  • Product 1: Easy application: Start measuring from standby mode at the touch of a button. Extra strong magnets at the back of the meter enable a hands free and secure measuring operation.
  • Product 1: Intuitive: Thanks to the large HD smart touch display with a clearly structured measurement menu, the flue gas detector offers all measurements at one glance.
  • Product 2: Versatile: The testo 510 measures differential pressure, total external static pressure, manifold pressure and duct velocities, making it ideal for HVAC/R field servicing technicians.
  • Product 2: Precise measurements: Thanks to the temperature and air density compensated pressure sensor, the air pressure meter delivers accurate data for ten different measurement units.
  • Product 2: Always ready: The backlist display, in conjunction with its intuitive design and magnets on the back, allow for a convenient application of the compact digital pressure g....
Check Stock

GasOne 2 Pack Propane Tank Gauge Level Indicator Leak Detector Gas Pressure Meter for RV Camper, Cylinder, BBQ Gas Grill, Heater and More Appliances-Type 1 Connection

  • 3 PC OF GAS ONE PROPANE GAUGE - NO MORE GUESSING GAMES, The days of having to guess how much propane is left in your tank are over. Gas One’s Propane Gauge allows for users to see how much fuel they have left in an instant. Installed with three levels of indication and a meter to show the level of propane left in your container.
  • UNIVERSAL FITTING CONNECTION - Gas One’s Propane Gauge has a universal fitting (QCC-1) made for standardized 5-20lb propane gas tanks. An easy to install connection for the purpose of reading an accurate propane level.
  • SOLID BRASS CONNECTION - Built with a solid brass construction to ensure a sturdy and durable connection, with sufficient heat resistance.
  • EASY HASSLE-FREE CONECTION - Ready to use right out the box, just simply attach Gas One’s Propane Gauge on to your standard propane tank and it’s ready for use.
  • EASY TO READ, COLORED INDICATOR - Gas One’s Propane Gauge has a meter that reacts to the pressure of the propane tank. There are three-built-in indicator levels labeled “Refill, Low Gas, Gas” to ensure an easy and accurate reading.
Check Stock

GasSaf Propane Tank Gas Gauge Leak Detector - Universal for QCC1 Type1 Propane Tank Gas Pressure Meter

  • 【Connection Method】:Compatible with all appliances with a QCC1 / Type1 connection 5 lb to 40 lb propane tanks.
  • 【Color Dial】:Monitors fuel level without removing the tank. color coded dial for allowing you to see at a glance when your propane level is low,here are three levels.
  • 【Safe and Reliable】:With leak detection function, if the leak is detected, the instrument will limit the flow to protect your safety.
  • 【Strong and Sturdy】:High precision meter , high quality brass, can perfectly provide oven, oirtight connection between RV and tank, very durable and sturdy..
  • 【Easy to Install】:Coming with dust cover. No tools required and easy to install with handheel grip for tightening. Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, fire pit table, turkey fryer and more propane appliances..
Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

  • Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
  • Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
  • Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
  • Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
  • Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check Stock

TOPCHANCES Portable 0-200ml/min Digital Gas Air Nitrogen Oxygen Mass Flow Meter Gas Air Flow Rate Tester MF5712 Compressed Air Digital Display Tester for Inactive Gas

  • Ultra low power by batteries or optional external AC adaptor.Internal data storage for additional data safety..
  • Potable design with rotatable meter head and easy exchangeable mechanical adaptors..
  • Hygienic and oxygen safe copper body for various fluids.User programmable range alarm for safety and other monitoring/control functionality..
  • Applications:MF5706 Gas mass flow meter suitable for different gas(Like air, compressed air, oxygen, nitrogen, CO² and other inactive gas ect.)....
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6.5mm – Propane/Butane”.
Check Stock

Gas Tank Fuel Gauge Meter Fits for Yamaha Grizzly 600 Big Bear Kodiak 400 ATV Gas Tank Cap Fuel Level Gauge Replacement 4SH-24260-11 4SH-24261-00

  • Fitment: The fuel gauge meter fits for Yamaha Big Bear 400 2000- 2012, fits for Yamaha Kodiak 400 1996-1998, fits for Yamaha Grizzly 600 1998 -2001.
  • Replace Part Number: 4SH-24260-11-00 4SH-24260-10-00 4SH-24260-00-00 4SH-24260-01-00 4SH242601100.
  • Measure the Fuel Level: The float of the fuel level gauge moves accurately and quickly, and it will display the remaining fuel level in the fuel tank. It is perfect for anyone who is building a custom dashboard or wants to replace their inventory fuel level gauge.
  • Durable and Rust-proof: Black aluminum bezel, polished edges, scratch-resistant curved glass lens, GUZIKO fuel meter is very fit, upgraded anti-aging and anti-corrosion seal to ensure no gas leakage or unpleasant smell, durable.
  • Easy to Replace: Use flat head screw driver to pop old ring off, push gas meter in the slot until it can't go any further, place new ring over top of meter and tighten it, the installation is complete.
Check Stock

PatioGem Propane Tank Gauge, Gas Grill Gauge for 5-40lbs Propane Tank, 3 Temperatures Scale, Colored & Reliable, Propane Tank Gauge Level Indicator, Propane Gas Gauge, for Grill, Heater, Fryer, Camper

  • ...ure, air-tight connection between the gauge and propane cylinder. Just add it into the cart, PatioGem lp tank gauge will be a good accessory that helps you to know your gas level in real-time!.
  • HASSLE-FREE INSTALLATION – No tools are required and easy to install. The gas meter connects to a 5-40lb propane tank and hose of a propane appliance. It takes less than 1 minute to install. In addition, you can freely rotate the display meter to get a proper position for easy viewing..
Check Stock