Top Nc800hdss

IRWIN Tap And Die Set Machine Screw/SAE/Metric 76-Piece 26376

  • This tap and die set is great for auto repair and machinery.
  • High-carbon steel taps and dies provide durability.
  • Machine screws: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF and 12 - 24 NC.
  • Fractional: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC and 1/2" 20 NF.
  • Metric: 5/8" hexagon: 3mm - 0.5, 4mm - 0.7, 4mm - 0.75, 5mm - 0.8, 5mm - 0.9 and 6mm - 1.0.
Check Stock

Wicked Bunny Proximity HDSS (High Definition Sound Standard) Gaming Headset, Comfortable Ergonomic Fit coupled with HDSS 3D Sound Stage to give Cystal Clear Sound Quality for Both Gaming and Music

  • High Definition Sound Standard Technology (HDSS) - 14.32% Reduction in psychological stress.
  • Detailed 3 dimensional sound reproduction.
  • Real-time crystal clear sound without distortion.
  • Frequency Respons 20Hz-20kHz , Impedance 32 Ohm.
  • 50mm Neodymium magnet drivers with 3.5mm analog connector.
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

Jucer Auger with Juicing Screen for O-me-ga juicers 8003, 8004, 8005 Slow Masticating Juicer Single Ultem Gear NC800, NC900 Juicer Parts

  • ❤️【Compatible With】-- Juicer auger fit for o-me-ga slow masticating juicer 8004, 8006 NC800, NC900.
  • juicer screen fit for o-me-ga slow masticating juicer 8003, 8004, 8005, 8006..
  • ❤️【Jucer Auger Horizontal Thread Design】-- Seven-section thread design, gradually squeezes from coarse to fine, and then fully squeezes out the juice from the fine filter, and grinds the juice at a low speed to prevent the juice from being heated and oxidized by the high speed, and the juice yield is as high as 95%..
  • ❤️【Premium Material】-- The juicing auger is made of heavy-duty food grade and stainless steel, the Juicing Screen is made of heavy-duty wire mesh, the periphery is made of sturdy and durable plastic, durable and not easy to damage..
  • ❤️【Easy to Clean】-- Just rinse with water, simple and convenient to use, save your time..
  • ❤️【After-Sale Service】-- Non-original parts. If you have any questions about the product or services, please feel free to contact us on time, we will do our best to solve any problems and let you have a pleasant shopping experience..
Check Stock

RMT-D171A RMTD171A Replace Remote Control fit for Sony CD DVD Player DVP-NS775V DVP-NS425 DVP-NC610 DVP-NC615 DVP-NC625 DVP-NC655 DVP-NC675 DVP-NC80 DVP-NC875 DVP-NS305 DVP-NS315 DVP-NS325 DVP-NS415

  • AIDITIYMI RMT-D171A RMTD171A Replacement Remote Control fits for Sony CD DVD Player.
  • No programming or pairing needed, just install new AAA alkaline batteries, then it works.
  • Operates for Sony DVD Player model DVP-NS775V DVP-F25 DVP-NC610 DVP-NC615 DVP-NC615B DVP-NC615S DVP-NC625 DVP-NC655 DVP-NC655P DVP-NC655PB DVP-NC655PS....
  • DVP-NC675P DVP-NC675PB DVP-NC675PS DVP-NC685V DVP-NC80 DVP-NC80V DVP-NC80V/B DVP-NS315S DVP-NS325 DVP-NS325B DVP-NS415 DVP-NS425 DVP-NS425P DVP-NS501....
Check Stock

MIBRO 301360BLUE Tap Die and Drill SAE Set 26 Pieces

  • Titanium coated for sharper, more precise cuts.
  • Made to exact specifications from long lasting tool steel.
  • Sets include prcise drills to match the taps.
  • Includes: 6-32 NC, 8-32 NC, 10-24 NC, 1/4 inch-20 NC, 5/16 inch-18 NC, 3/8 inch-16 NC, 7/16 inch-14 NC, 10-32 NF.
  • Also includes adjustable tap wrench and hex die holder.
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

HORUSDY 40-Piece SAE Tap and Die Set, Inch Sizes for Coarse and Fine Threads Tool with Storage Case

  • Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools

  • Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

Johnsen's 4918 Radiator Stop Leak - 12 oz.

  • Fitment: Fit for Honda NC750S 2012-onward NC750X 2012-onward NC750D 2012-onward..
  • Made with high quality stainless steel for maximum durability. Impervious to rush, will look like new after washing..
  • The cover make your motorcycle cooler and help to protect your expensive and vulnerable radiator from flying debris..
  • Easy to install, direct replacement for old or broken one, no complicated procedures needed..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ...Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

SharCreatives 60 Piece Metric & SAE Threading Tap & Die Tool Set Coarse and Fine Threads for Threading and Re-threading with Accessories and Storage Case

  • ✔PROFESSIONAL HEAVY DUTY COMPREHENSIVE SET ideal for rethreading fasteners and fastener holes, cutting or renewal internal or external threads . Precision milled SAE and METRIC tap and die set for cutting raw material or repair existing threads, remove screws and more..
  • ✔SUPERIOR QUALITY made of hardened Alloy Steel suitable for lifelong durability, and superior strength. Suitable for cutting in steel, copper, aluminum, cast iron and etc.
  • ✔WIDE RANGE USE - Set includes complete and MOST POPULAR SIZES (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from accessories to fall apart..
  • ✔ PROFESSIONAL AND PERSONAL USE this tap and die kit is ideal for DIY projects at home, auto and machinery workshop and many more..
Check Stock