Top Needle Bearings

E.T.ENERGIC 7ft Olympic Barbell 45lb Barbell Bar Men's 1500-lbs Capacity Alloy Steel for 2" Olympic Plates for Weightlifting, Powerlifting, Gym Home Exercises

  • ...on and improves the grip experience. The knurling design can also effectively reduce the tension in the wrist and forearm, increase the safety of sports and ensure comfort.
  • [Needle Bearing & Sleeves] The sleeves of barbells are often constructed with either bushings or bearings. Our Olympic bar sleeves are friction welded, it's stronger than normal welding sleeves. Each of the rotating sleeves with 4 needle bearings and one bushing, totally 8 needle bearings in the bar. Bushings provide a moderate rotation, bearings on the other hand are designed to spin fast and match the catching needs of the snatch and clean & jerk.
  • [Spec] Our barbell bar adopts refined design to meet your every strength training. The bar weighs 44 pounds (20 kg) and is 86.61 inches (7-foot) long. The length of the sleeve that can be loaded is 16.4 inches, suitable for a 2-inch barbell. The medium knurled design of 28mm satisfies your picky details. Is your high-quality choice for training.
  • [Muitiple Usage Weighting Bar] The barbell bar can meet all your training needs. Especially your legs, buttocks and back. This can not only carry out end....
Check Stock

Grease Injector Needle

  • Easily grease sealed bearings Insert needle under or through rubber cover to apply grease to bearings.
  • Snaps directly onto a jaw type coupler to reach grease fittings in very tight spaces.
  • Works best with the LockNLube Grease Coupler.
  • 18 gauge steel with protective plastic cover For hand-operated grease guns.
Check Stock

Hot Rods TBK0075 Transmission Bearing Kit

  • A must have for any new transmission or engine case installation or repair.
  • Includes Hot Rods trusted bearings for primary and secondary shafts of transmission.
  • Includes special needle bearing for shift drum.
  • Does not include water pump bearing or counter balancer bearings or oil seals.
Check Stock

Synergee Open 20kg Men's Black Phosphate Shaft and Chrome Sleeve Olympic Barbell. Rated 1000lbs for Weightlifting, Powerlifting and Crossfit.

  • ... a standard knurl with dual marks to provide grip without the rip. The black phosphate coating on the shaft and chrome on the sleeves protects from oxidation and wear. Each sleeve has a loadable length of 16.4 inches (20 kg) OR 13 inches (15 kg), so you can lift lots!.
  • ★ BEARINGS, NOT BUSHINGS ★ - We choose needle bearings over bushings and other bearings because we believe in using the best components to provide you with the best product. Each bar has 4 needle bearings (2 per sleeve) to provide a nice spin for dynamic lifts..
  • ★ WHAT’S IN THE PACKAGE ★ – Each bar has a black phosphate coated shaft and chrome plated sleeves. This bar is 20 KG, 28 mm-diameter (standard men’s bar) and comes fitted blue Synergee silicon rings..
  • ★ NO SWEAT GUARANTEE ★ – Leave the sweating and swearing for your training! Buying from Synergee means quick, hassle-free, and caring customer service! Plus, we offer a better-than-money-back guarantee: if there is an issue with your product for any reason, we will send you a new one quickly and absolutely FREE! 100% Customer Satisfaction is our Number 1 Goal!.
Check Stock

Game Room Guys Tornado Dynamo Natural Cork Foosballs - Set of 6

  • Wear funny foosball player 26 t-shirt apparel outfit clothing accessory when using wooden table parts outdoor cover waterproof bearings silicone....
  • Foosball fan lover gift vintage wrap balls yellow blue white black red wax portable plastic leg cover grease outdoor lighting bearings punch pin cork....
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

All Balls 25-2061 Rear Differential Bearing and Seal Kit

  • Specs: Differential Bearing and Seal Kit Rear, Contains: 3 Ball Bearings, 1 Needle Bearing, 3 Seals, 2 Snap Rings.
  • Kits contain all of the bearings and seals required trepair your differential.
  • Compatible With/Replacement For: Honda TRX500FA 2005 - 2014, TRX500FE 2005 - 2011, TRX500FGA 2005 - 2008, TRX500FM 2005 - 2011, TRX500FPA 2009 - 2014, TRX500FPE 2007 - 2011, TRX500FPM 2008 - 2011, TRX500TM 2005 - 2006.
  • 100% New aftermarket Differential Bearing and Seal Kit Rear built to meet OEM specifications.
Check Stock

Sky-Watcher Flextube 300 Dobsonian 12-inch Collapsible Large Aperture Telescope – Portable, Easy to Use, Perfect for Beginners, White/Black (S11740)

  • LARGE APERTURE: Get a bright, bold viewing experience at a fraction of the cost of other optical designs..
  • INNOVATIVE COLLAPSIBLE DESIGN: Unique strut design allows for optical tube to collapse for ease of portability while keeping collimation..
  • PROPRIETARY TENSION CONTROL HANDLES: These patented handles allow for accurate movement without the need for perfect balance..
  • 94% REFLECTIVE MIRRORS: Fully multi-coated borosilicate primary and secondary mirrors deliver exceptional views..
  • STEEL NEEDLE BEARINGS: Proprietary steel needle bearings ensure smooth azimuth movement..
  • COMES COMPLETE: All accessories such as, 2-inch Crayford-style focuser with 1 1/4-inch adapter, two super wide-angle eyepieces (25mm and 10mm), and 8x50 right-angle finder scope are included with purchase..
  • STURDY AND LIGHTWEIGHT DESIGN: When fully assembled, the Dobsonian weighs only 40 pounds fully assembled (46 pound tube, 38 pound base).
Check Stock

papababe Bumper Plates, High-Bounce Olympic Weight Plates with Colored Fleck-Rubber Weights Plates for Weight Lifting and Strength Training (100 lb set NEW)

  • ...e includes: A 100lb set of IFAST rubber olympic weight plates (2X10lb,2X15lb,2X25lb) and a IFAST barbell bar with maximum capacity 700lbs..
  • Durable construction of barbell bar means a loaded bar can withstand drop after drop. Each of the rotating sleeves with 4 needle bearings and one bushing, totally 8 needle bearings in the bar. The bearings design promote comfort, tensile strength rating of 190 000 psi, rotating sleeves to reduce pressure on wrists and forearms, make the snatch more smooth..
  • IFAST bumper plates are made with high-density rubber durable with a low-bounce, withstand repeated drops. 2inch/17.5cm in diameter, protect any type of floor and your bars. Expertly designed stainless steel "hooked" insert that remains firmly seated, keep balance..
  • The bumper plates and barbell bar together make a couple and will fulfill every lifting need. The plates alone, bestow many options: squats, deadlifts, bench press, twists, etc. Pair with barbell bar to do more, they are suitable for most people looking to get fit in a home gym or office..
Check Stock

VEVOR Leather Cutting Machine 360x220mm Manual Die Cutter Max 15 mm Leather Embossing Machine Hand Press Mold Leather Die Cut Leather Craft Cutting Machine for Various of Materials

  • Solid Construction: Made of selected high-quality 45 # cold-drawn steel, black anodized, advanced needle bearings can withstand larger loads. The....
  • Excellent Stability: The guide shaft is integrated with the silicon manganese steel spring wire to provide more stable applications. The upgraded....
  • Strong Bearing Capacity: Equipped with integrated forged needle roller bearings, double guide shafts, and pressure relief PP pads, the machine can....
  • Easy to Use: Adjustable pressure stroke, up to 15 mm (0.59 "). Lightweight and durable, even less powerful people can easily operate..
  • Wide Application: Suitable for various materials, such as fabric leather, foamed PVC / EVA, non-adhesive, plastic/rubber board, medium soft board,....
Check Stock

PAPABABE Olympic Barbell, 1500LB Capacity barbell Cerakote Coating Bar, Weightlifting Bar 2 Inch Barbell, for Powerlifting and Crossfit, Pink (25MM)

  • ..., polymer-ceramic coating that offers an excellent level of protection. Good hydrophobic properties prevents corrosion resistance, improves impact strength, and has perfect chemical resistance in the most harsh environments..
  • 【Smooth Rotation】: Olympic bar use 8 needle bearings and 2 brass bearing, each of the rotating sleeves with 4 needle bearings for smooth sleeve rotation, designed to reduce pressure on wrists and forearms..
  • 【Lifelong Use】: We have enhanced the surface treatment and hardening process of our proprietary steel, and we are full of confidence in lifelong use..
Check Stock

Olympic Barbell Curl Bar EZ Bar Strength Training Bar Threaded Chrome Barbell Bar for Weightlifting, Hip Thrusts, Squats and Lunges

  • ...ction and improves the grip experience.The knurling design can also effectively reduce the tension in the wrist and forearm,increase the safety of sports and ensure comfort..
  • NEEDLE BEARING & SLEEVES:The sleeves of barbells are often constructed with either bushings or bearings. Each of the rotating sleeve has needle bearings and one bushing. Bushings provide a comprehensive smooth spin, bearings on the other hand are designed to spin fast and match the catching needs of the snatch and clean & jerk..
  • NO SWEAT GUARANTEE-Leave your sweat and curse for your training!Buying from Holleyweb means fast, easy and caring customer service! In addition, we provide a better guarantee than a refund:if your product fails for any reason,we will quickly provide you with new products for free! 100% customer satisfaction is our first goal!.
Check Stock

10 Pcs Grease Gun Needle Tip of The Mouth, Removable Needle Grease Dispenser, 2.95 Inch Length Standard Grease Sharp Type Fitting, Grease Injector Needle for Use with Hand Operated Grease Guns

  • Package: 10 packs Needle Grease Gun Adapter..
  • For the finer machine, the needle tip is convenient to punch the butter in. Needle adapter for oil-filled or difficult-to-grease areas, suitable for tight spaces..
  • For use with most hand-operated grease guns and air-powered equipment..
  • The grease gun needle tip is suitable for use in ships, ferries, repair trucks, cars, workshops, machinery maintenance and more..
  • Worked great needle screws to grease gun so you don't loose grease greasing the joint, Makes it easy to grease wheel bearings..
Check Stock