Top Neewer Follow Focus

Wooden Camera Zip Focus Single Rod 15mm Lightweight Follow Focus with 1 1 Gear Ratio.8 Mod Cine Lens Gear and Friction Gear Fits All Lenses 15mm LW

  • Lightweight Follow Focus System: This single sided follow focus is ideal for compact and handheld camera setups and is universally compatible to fit all lens types.
  • Locks into Position: Securely clamps onto a single rod with a no-slip grip. The Zip Focus stays put and will not slip.
  • Handheld Control: Inspires smooth focus pulls with a 1:1 ratio on all lens types. Rubberized focus knob provides sure grip.
  • Compact Design: Two rotation points enable vertical alignment to the camera body. Swing arm design will allow you to pull the zip focus away from the lens for a quick lens change.
  • Follow Focus Kit Includes: 1 x.8 mod cine lens gear, 1x friction gear, 1 x hard stop gear, and 2 x standard marking disks.
Check Stock

SmallRig Rosette Side Handle with Record Start/Stop Remote Trigger for Multiple Selected Cameras- 3324

  • 【STANDARD 0.8 MOD】SmallRig Seamless Focus Gear Ring 3293 is designed to fit lenses for precise and stable focal length adjustment. It features standard 0.8 MOD and allows you to add 0.8 MOD gears to a compatible lens for use with cine follow focuses..
  • 【FITS LENS PERFECTLY】Moderate stiffness, SmallRig Φ72-Φ74 Seamless Focus Gear Ring 3293 fits lens perfectly. This 72mm to 74mm size fits virtually all lenses of the same outer diameter..
  • 【SUPPORT 360° ROTATION】It makes less noise and no distortion, allowing 360º smooth rotation and precise focus adjustment..
  • 【SEAMLESS SWITCHING】The ring is made by elastic material, suits lens seamlessly and evenly. (Please Note: Gear slippage or jam may occur when mounted onto lenses larger than Φ72-Φ74mm across.).
  • 【RELATED ACCESSORIES】The ring 3293 can work with SmallRig Mini Follow Focus 3010 and other follow focus systems, such as Seamless Focus Gear Ring 62.5 to 64.5mm 3291, 66 to 68mm 3292, 75 to 77mm 3294, 78 to 80mm 3295, 81 to 83mm 3296..
Check Stock

Tilta FF-T06 Mini Follow Focus Lens Zoom Control Lightweight for DSLR for Sony A7 A9 for Nikon GH5 BMPCC 4K 6K Cage

  • The Mini Follow Focus is made as a single unit with the ability to adjust the single rod attachment to fit any sized cine lens or photo lens. The single rod attachment mounts to any standard 15mm rail..
  • The Focus wheel features a 360 degree rotation with adjustable hard stops. The focus wheel also features a fluid dampening system that helps with precision focusing. The marking disk is removable and can be marked and cleaned for repeated use..
  • The kit includes the Mini Follow Focus, a Zip Tie Follow Focus Ring, a 15mm single rod attachment, two allen keys, a 15x100mm black aluminum rod and a portable case..
  • For lenses with different pitch gears, we will offer a variety of focus gear attachments..
Check Stock

Nitze 15mm Follow Focus Kit with 3 Reversible Drive Gears 3 Marking Disks Gear Ring Belt and Crank A/B Hard Stops and 360° Infinity Zoom Adjustable Dual Rod Cine Follow Focus - MF15D

  • 【Adjustable Rail】Nitze MF15D follow focus features an adjustable rail above the 15mm rod clamp. It can be adjusted within 50 mm to fit your desired lens by twisting the red thumbscrew at the bottom..
  • 【A/B Hard Stops】The follow focus system supports to preset A/B hard stops focal length or use 360° infinity zoom. Built-in threaded holes allow you to put A/B hard stops screws inside when not in use to prevent loss..
  • 【Reversible Drive Gears】The follow focus kit contains 1 x 0.8 Mod/38 Teeth, 1 x 0.8 Mod/43 Teeth, 1 x 0.8 Mod/65 Teeth drive gears. And the drive gear is reversible. It can be mounted on the front or back side of the follow focus to meet different focusing needs..
  • 【Three Marking Disks】The follow focus comes with three marking disks for interchangeble. Snap on magnetic marking disk can be easily attached or detached..
  • 【Crank & Gear Ring Belt】T006-03 crank is included for speedy and accurate focusing. The gear ring belt can be used when your lens is without 0.8 pitch gears..
Check Stock

SmallRig Mini Follow Focus with A/B Stops & 15mm Rod Clamp and Snap-on Gear Ring Belt for DLSRs and Mirrorless Cameras Fits Different Diameter Lenses Up to 114mm - 3010

  • 【COMPACT DESIGN】SmallRig Mini Follow Focus 3010 is designed for easy and quick focus control in video shooting. It is basically compatible with the most cameras on the market like DLSRs & Mirrorless Cameras. In addition, it features a super lightweight design with only 195g, compact and portable, easy for carrying outside..
  • 【ADJUSTABLE A/B STOPS】The A/B hard stops of the follow focus are adjustable, you can adjust the suitable A/B focal length according to your shooting needs. Moreover, by turning on/off the AB stops lock, you can realize the easily switch of focal length between 360° unlimited zoom and A/B focal length..
  • 【ANTI-SLIP & ANTI-SWEAT DESIGN】The Mini Follow Focus 3010 imitates sports car hub, adopts anti-slip and anti-sweat design, and its excellent damping feeling and ergonomic design helps to control the focal length you need more accurately and comfortable, thus realizing a better shooting..
  • 【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching other SmallRig accessories such as NATO Side Handle 2187, Super....
Check Stock

Neewer Aluminum Film Movie Kit System Rig for Canon/Nikon/Pentax/Sony and other DSLR Cameras Style II

  • Kit Includes: (1)Aluminum Alloy Video Cage,(1)Top Handle Grip,(2)15mm Rod,(1)Matte Box,(1)Follow Focus,(1)Shoulder Rig.
  • Video Cage: Made of aluminum alloy, sturdy and solid enough.
  • Can efficiently avoid and eliminate any microseism or any blur of pictures caused by....
  • Matte Box: This Matte Box could be adjusted the height (up to 45mm) according to the lens of camera on the rail rod system. It can also works with....
  • Follow Focus: The follow focus finder can let you shoots precisely, focus precisely and operate smoothly. Whether you're shooting with a fixed-lens....
  • Shoulder Rig: Includes 15mm rod, Soft Rubber Shoulder Pad and Dual-hand Handgrip For All DSLR Video Cameras and DV Camcorders.
Check Stock

Authentic Kamerar Fhugen Fusion Honu Camera Video Cage for Panasonic GH3/GH4 and Sony A7/A7R

  • 【Main function】The camera cage set is equipped with a follow focus and shading bucket handle, which is more convenient for video shooting..
  • 【With a follow focus device】With a follow focus device, it is easier to focus, and the tube can be adjusted to support the body to achieve three‑point fixation, making shooting easier and more stable..
  • 【Adjustable shading bucket】Adjustable shading bucket effectively reduces the interference of ambient light on the picture, making the picture clearer and more transparent..
  • 【Multiple cold shoe mouth and 1/4in screw holes】Multiple cold shoe mouth and 1/4in screw holes, radio microphone and external monitor fill light, etc., can further improve professional shooting equipment..
  • 【Nice design】Cable clamps are designed on the cage, which is convenient for fixing the external data transmission line and avoiding the wire from falling off during shooting..
Check Stock

DSLRKIT Lens Focus Calibration Tool Alignment Ruler Folding Card(Pack of 2)

  • Compatible with Canon Nikon Sony and other DSLR Camera Camcorder DV Video.
  • Fits industry standard 15mm rod mounts and 60mm center to center distance.
  • Gear drive can adjust camera focus in a more accurate and smooth way.
  • Gear ring belt suitable for less than 100mm diameters lens.
  • White mark ring made of plastic and used to mark the scale on follow focus.
  • Note: Only follow focus, camera and other shoulder rig are not included.
Check Stock

Neewer Universal Camera Shoulder Mount, Aluminum Alloy Camera Shoulder Rig, Video Filmmaking System with Movable Shoulder Pad, 15mm Rod, 1/4" 3/8" QR Plate for DSLR Mirrorless Camera Camcorder - ST34

  • 【Universal Shoulder Rig】 NEEWER's Camera Shoulder Rig is a shoulder-mounted kit designed to stabilize your camera that offers you comfort for lengthy filmmaking sessions. Compatible with Canon EOS 90D R5 R5C R6 6D Mark II Sony Alpha 7 IV Alpha 7 III Alpha 7R IV Alpha 9 II FX 6 Nikon Z 6 Z 6Ⅱ Z 7 Z 7Ⅱ Blackmagic 4K 6K 6K pro Fujifilm X-T4 Panasonic Pentax and other DSLR mirrorless cameras, camcorder and minimizes unnecessary body movements when shooting videos. Load capacity: 44lb (20kg).
  • 【15mm Rod Rail System】 Two standard 15mm rods with 60mm rail gauge enable you to customize your rig with an LED light, field monitor, microphone, follow focus, and other wireless accessories. Multiple 1/4”-20 and 3/8”-16 screw holes at the baseplate help with easy tripod mounting.
  • 【Movable Shoulder Pad】 The ergonomic shoulder pad made of highly elastic sponges can comfortably sit on your shoulder for stable shooting. The shoulder pad can be moved 65mm to the right so that you can always face the subject and look straight at the camera LCD screen or field monitor. Several 1/4"-20 holes allow the attachment of small gadgets / accessories.
Check Stock

Zhiyun Crane 2 3-Axis Handheld Gimbal Stabilizer for DSLR Mirrorless Camera Compatible with Sony A9 A7iii Panasonic Nikon Canon-2021 Version

  • 【3.2KG Max Payload】Empowered by the Intune Algorithm System, The Crane 2 supports a max. the payload of 3.2kg, mountable by all models of DSLR and....
  • 【Full-range POV】Crane 2 brings a whole new perspective to POV mode. The full-range 360°synchronous movement on all three axes gives you an....
  • 【Digital Follow Focus】Integrated with an unprecedented follow focus wheel and attached Servo Follow Focus(No included), Crane 2 allows ±0.02°....
  • 【Intuitive OLED Display】The intuitive interface design help you easily identify the connection status, battery level, control mode, and multiple....
  • 【Durable Quick Release Plate】which allows you to mount your camera quickly to the stabilizer or tripod nice and tight simply with a sliding of the....
Check Stock

NEEWER X12 Aluminum Teleprompter with RT-110 Remote Control Connected via Bluetooth on NEEWER Teleprompter App & Carry Case Compatible with iPad iOS/Android Tablets Smartphones DSLRs Black

  • ...nd leading technology glass, the text on your tablet is clearly reflected onto the high-definition display of the teleprompter. The reflected text can be read up to 10’/ 3m away. Note：It is NOT compatible with wide angle lens and the focal length of camera lens needs to be more than 28mm..
  • 【Smart Control】The NEEWER teleprompter supports smart control via the included RT-110 remote and the NEEWER Teleprompter App. With one simple press, you can pause, speed up or down, and turn pages with ease. The App is compatible with iOS 11.0 or later / Android 6.0 or later. Note: The remote control needs to be linked IN THE APP instead of linking it directly via bluetooth of your smartphone or tablet..
  • 【Wide Compatibility】 The teleprompter can fit all models of smartphones or tablets up to 9.84" x 8.68" / 25cm x 22cm, compatible with iPad iPad Air iPad Pro 11", etc. Its lens hood can be adjusted to suit cameras and mobile phone lenses of various sizes. Note: NOT compatible with iPad Pro 12".
  • 【Easy Assembly】With clear instructions for installation, the teleprompter can be set up within minutes. The collapsing design allows for easy storage and transport. Made of aluminum alloy, the teleprompter is lightweight yet durable enough to hold your camera, ta....
Check Stock

NEEWER Aluminum Alloy Filmmaking Camera Video Cage Rig with Top Handle, 2 Grips, Standard Arca Type Base, Compatible with Sony Alpha 7S III A7IV A6600 Canon EOS R5C R5 R6 DSLR Mirrorless Camera, VS107

  • 【Universal Camera Cage】 Engineered with premium CNC aluminum alloy, this Neewer camera cage is universally compatible with Canon EOS 90D/ EOS 6D Mark II/, Sony Alpha 7C/ Alpha 7 III/ Alpha 7R IV/ Alpha 9 II/ Alpha 6600, Nikon Z 6/ Z 6Ⅱ/ Z 7/ Z 7Ⅱ, Blackmagic 4K / 6K ,Fujifilm X-T4, Panasonic ,Pentax, and other DSLR mirrorless cameras and camcorders up to 33lb/15kg.(This product is not suitable for a lens with support ring, so please remove the support ring before use).
  • 【Comprehensive Upgrade】 The upgraded cage features a dual-rod base, two 15mm-diameter rods, and a standard 60mm rail gauge for attaching follow focus, hood, lens support, and other accessories. The non-slip top silicone handle and the two ergonomic handgrips with synthetic leather textures and finger contours offer you a comfortable grip.
  • 【Diverse Mounting Points】 The top of the cage has numerous 1/4” and 3/8” female threads, cold shoes, and compatible ARRI locating holes for mounting magic arms, cold shoe mount adapters, microphones, field monitors, LED video lights, RGB lights, and other accessories that will facilitate your video shooting in any situation.
  • 【Easy Camera Installation】 An integrated 1/4” aluminum alloy thumb screw with knurls adds friction for qu....
Check Stock