Top Nema 3stepper Motor

100mm Length Travel Linear Stage Actuator with Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table with NEMA23 Stepper Motor for DIY CNC Router Milling Machine

  • 【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing....
  • 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm.  Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω.....
  • 【1605 Ball Screw】- Drive type: CBX1605 ball screw. Effective travel length: 100mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw....
  • 【Slide Block】- Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum....
  • 【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of....
Check Stock

CNCTOPBAOS 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board CNC Router Engraver Milling Machine Controller Board

  • ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
  • ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
  • Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
  • ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
  • ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
Check Stock

TOPINTECH Stainless Steel Well Pump 1HP 110V 20GPM 223ft Head Deep Well Submersible Pump for Domestic, Civil and Industrial

  • ...】The cable lead-in line is rubber sheathed type with reliable sealing and good aging resistance.
  • the pump casing made of high-strength thermoplastic PC.
  • the impeller uses POM plastic. These materials have high strength, strong impact and wear resistance..
  • 【Wide Voltage Motor】Single-phase 230V motor can run at 180-250V, single-phase 110V motor can run at 100-120V. Pure copper core motor, F-class insulation enameled copper wire, pumping power is more adequate, more safe and reliable..
  • ✔【NEMA Standards】In strict accordance with the National Electrical Manufacturers Association NEMA standards. The advanced rotor spline machining process ensures the hardness, finish, precision, consistency and wear resistance of the rotor, reducing rotor wear at high speeds and ensuring smooth motor operation..
  • 【Wide Application Scenarios】Accurate IAE pressure balance design makes the motor dive deeper；TOPINTECH's special mechanical seal for deep-well pumps for longer motor life；High strength anti-sand fluid components can applied to harsh working conditions. They can be used for deep well/ water tower water supply, agri....
Check Stock

4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws

  • 4pcs of NEMA 23 stepper motor mounting brackets..
Check Stock

Nema 34 Stepper Motor Steel Mounting Bracket with Mounting Screws

  • NEMA 34 stepper motor mounting brackets..
Check Stock

60:1 Worm Gear Speed Reducer Reduction Gearbox Ratio Gear Box

  • Input Bore Size: 11mm Input Flange Model: NEMA23.
  • Output Bore Size: 14mm Application: Matched with Servo/Stepper Motor.
Check Stock

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

Siemens 14DUE32AF Heavy Duty Motor Starter, Solid State Overload, Auto/Manual Reset, Open Type, Standard Width Enclosure, 3 Phase, 3 Pole, 1 NEMA Size, 10-40A Amp Range, A1 Frame Size, 120 Separate Control 60Hz Coil Voltage

  • Price For: Each Standards: UL, CSA Enclosure NEMA Rating: No Enclosure Starter Type: NEMA Style Hz: 50/60 Item: NEMA Magnetic Motor Starter Auxiliary Contact Form: 1NO Number of Poles: 3 Overload Relay Amp Setting: 5.50 to 22A Action: Nonreversing NEMA Size: 1 Width: 3.5" HP @ 3 Phase - 575V: 10 HP @ 3 Phase - 480V: 10 HP @ 3 Phase - 240V: 3.
  • HP @ 3 Phase - 208V: 3 Height: 7.44" Depth: 3.75" Coil Volts: 120VAC Amps AC: 27 Country of Origin (subject to change): Mexico.
Check Stock

Siemens 14FUF32BA Heavy Duty Motor Starter, Solid State Overload, Auto/Manual Reset, Open Type, NEMA 1 General Purpose Enclosure, 3 Phase, 3 Pole, 2 NEMA Size, 13-52A Amp Range, B Frame Size, 110-120/220-240 at 60Hz Coil Voltage

  • Price For: Each Standards: UL, CSA Action: Nonreversing Starter Type: NEMA Style Item: NEMA Magnetic Motor Starter Auxiliary Contact Form: 1NO Number of Poles: 3 Height: 7.44" Depth: 3.75" Enclosure NEMA Rating: No Enclosure Coil Volts: 120VAC Overload Relay Amp Setting: 10 to 40A Amps AC: 27 NEMA Size: 1 Hz: 50/60 Width: 3.5" HP @ 3 Phase - 480V: 10.
  • HP @ 3 Phase - 240V: 7-1/2 HP @ 3 Phase - 208V: 7-1/2 Country of Origin (subject to change): Mexico.
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

FYSETC Ender 3 S1 3D Printer Stepper Motor 42-40 Nema 17 Ender 3 CR6 SE Extruder Motor 2 Phase 1A 1.8 Degree with 39.3in Connecting Cable Compatible with Ender 3 Pro V2 Ender 5 Pro Plus CR-10 E-axis

  • Motor Model: 42-40 Nema 17, widely work for Most 3D Printer Reprap Ender 3 CR-10. It fits for the E-axis of Crealit Ender series and the CR series,....
  • High torque -Holding torque up to 0.45Nm. Low noise, have better high speed performance..
  • Size: 42mm X 42mm X 40mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable..
  • With the stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading. The line sequence....
  • Package Includes: 1 x 42-40 Nema 17 Stepper Motor.
Check Stock

Worm Gear Nema23 Stepper Motor 3.5A L2.1inch Gearbox Ratio 30:1 Speed Reducer for CNC DIY Router

  • 2 phase stepper motor 2.1inch long, 1.3Nm.
  • Speed reducer motor output speed 0--20 R/min.
  • Applied to CNC Router, Engraving, Milling, Lathe. Fast Delivered 4-6 days after shipping..
Check Stock