Top Neo 6m Gps Arduino

AITRIP GT-U7 GPS Module GPS Receiver Navigation Satellite with EEPROM Compatible with 6M 51 Microcontroller STM32 UO R3+ IPEX Active GPS Antenna for Arduino Drone Raspberry Pi Flight 2PCS

  • GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M..
  • With a USB interface, you can directly connect it with computer. That is, with the host computer-owned serial port function, no need for external....
  • GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning....
  • Operating voltage: 3.6V-5V (or direct usb power supply).
  • Operating baud rate: 9600 (can be modified).
  • Mobile phones, camcorders and other mobile....
Check Stock

Arduino MKR GPS Shield [ASX00017]

  • A plug 'n' play shield for experimenting with monitoring fleets, high-altitude measurements, or any kind of project requiring localization of devices..
  • Arduino MKR GPS Shield uses the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the Arduino MKR boards, but thanks to its Eslov connector, it is also possible to hook it up to any board..
  • It comes with a dedicated library that allows two different interfaces and offers a consistent set of APIs designed for a full usage of the GPS acquired information..
  • Operating voltage is 3.3V, but this shield comes also with an on-board holder for CR1216 batteries..
  • The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. The extra I2C port, also referred to as the Eslov self-identification port comes with: SDA, SCL, GND, +5V, and an extra digital pin, meant to send an alarm to the otherwise plain I2C devices connected to it..
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

GOLF Bushnell Neo X & Neo XS GPS Charging Cable

  • Fits Bushnell Neo X & Neo XS Golf GPS Watches.
Check Stock

Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)

  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor.
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages.
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging.
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit.
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions.
Check Stock

MoKo Charger Compatible with Bushnell Neo Ion 1/Neo Ion 2/Excel Portable Replacement Data Sync USB Charging Cable Golf GPS Smartwatch Accessories Fit Bushnell Neo Ion 1/Neo Ion 2/Excel - Black

  • PERFECT COMPATIBLITY - Perfectly designed for your precious Bushnell Neo Ion 1, Ion 2, Excel Golf GPS Smartwatch. Note: Bushnell Neo Ion 1, Ion 2,....
  • HIGH PROTECTION - Provide short-circuit protection and overcurrent protection that prevent your Bushnell Neo Ion 1, Ion 2, Excel Golf GPS Smartwatch....
  • PREMIUM QUALITY - Adopted imported material, the flexible cable ensures tangle-free operation. Premium PVC materials with a smooth surface protect....
  • LONG SERVICE LIFE - The working current is stable, and the temperature is kept constantly during charging, so as to protect the watch..
  • PORTABLE - Compact and lightweight design makes it easy to store and carry. Convenient to use in Office, at home or on travels! We advise that you....
Check Stock

Caddie Buddy Golf Cart Phone Mount (Phones Wider Than 2.8\ (Including Case))

  • Golf Cart Mount/Holder for BushneII Phantom + Neo Ghost +Neo.
  • Multiple Mounting Locations Including Your Push Cart, Steering Wheel Column & Dash.
  • Rubber Clamping Pads So It Won't Slide Down or Fall Off!!.
  • Made in the USA. BushneII GPS Not Included!!!.
Check Stock

Xxerciz Case for Bushnell Golf Phantom 2, GolfBuddy Voice, Voice 2, Bushnell NeoGhost and Garmin Approach G10, Golf GPS Protective Cover with Carabiner

  • Perfectly fit: Compatible with Bushnell Phantom 2 Handheld GPS, Phantom Golf GPS, Power Bundle, Neo Ghost Golf GPS, Garmin 010-01959-00 Approach G10, & other handheld GPS..
  • Easy to Carry: fashion handy case with carabiner and molle design, can be able to your backpack, belt, golf travel bag. Good for home storage and travel carrying..
  • Durable Protection: Nylon carrying case protecting the device from shock, shake, scratch. With flannel lining, protect your GPS screen from scratching..
  • Useful design: Strong compact light weight case, with smooth zipper, easy access and use..
  • Worry-free Guarantee: We offer 100% refund with quality problem. For sales-the protective case only, Device or accessories sold separately..
Check Stock

Bushnell Neo Ghost Belt Clip Holder (Will NOT Fit Other Models or Brands) (GPS Must be Placed in Face Out)

Check Stock

Bushwhacker Magnetic GPS Mount for Golf Cart Railing - Fits Most GPS s with Belt Clip - Holder Attachment Rangefinder Bar Accessory Case Quick

  • Golf Cart Mount/Holder for BushneII Phantom + Neo Ghost +Neo.
  • Multiple Mounting Locations Including Your Push Cart, Steering Wheel Column & Dash.
  • Rubber Clamping Pads So It Won't Slide Down or Fall Off!!.
  • Made in the USA. BushneII GPS Not Included!!!.
Check Stock

Ingcool 4G / 3G / GNSS HAT Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano Based on SIM7600A-H 4G Support 4G Connection,LTE CAT4 for Downlink Data Transfer,

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,Onboard USB interface, to test AT Commands, get GPS positioning data, and so on,Onboard CP2102 USB to UART converter, for serial debugging.
  • Breakout UART control pins, to connect with host boards like Arduino/STM32,SIM card slot, supports 1.8V/3V SIM card.
  • This Product mainly applicable in North America (US, CA, MX). Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • Onboard audio jack and audio decoder for making telephone call,Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper,2x LED indicators, easy to monitor the working status.
  • Supports SIM application toolkit: SAT Class 3, USAT,Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check Stock

CaseSack Golf GPS Case for Bushnell Phantom 2 Handheld GPS, Phantom Golf GPS, Neo Ghost Golf GPS, Garmin 010-01959-00 Approach G10, & Other Handheld GPS, More Room for Cable and Others

  • Perfectly for Bushnell Phantom 2 Handheld GPS, Phantom Golf GPS, Neo Ghost Golf GPS, Garmin 010-01959-00 Approach G10, & Other Handheld GPS, More Room for Cable and Others.
  • Featured Design: Strong compact light weight case to organizing GPS and charger cord, well organized and protected.
  • fit purse, shoulder bag, suite case. good for home storage and travel carrying.
  • Assured Protection: Semi-hard carrying case protecting the device from shock, shake, scratch. PEVA materials with pressure or hit absorbing and water resistant.
  • User friendly design: Strong compact light weight case, with elastic secure strap to hold camera in base. And mesh pocket in the lid for accessories..
  • Worry-free Guanrantee: CaseSack offer 100% refund with quality problem. Only protective case for sales only, Device or accessories sold separately. CLICK the orange button to buy. Share with your review later on..
Check Stock