Top Netgear Switch Poe

NETGEAR 5-Port Gigabit Ethernet Unmanaged PoE Switch (Old Model) - with 4 x PoE @ 55W

  • ETHERNET PORT CONFIGURATION: 5 Gigabit ports.
  • POWER-OVER-ETHERNET: 4 PoE ports with 55W total power budget.
  • PLUG-AND-PLAY: Simple set up with no software to install or configuration needed.
  • VERSATILE MOUNTING OPTIONS: Supports desktop or wall mount placement.
  • SILENT OPERATION: The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.
  • ENERGY EFFICIENT: Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..
  • BUILT TO LAST: Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock

NETGEAR Cloud Managed Wireless Access Point (WAX610PA) - WiFi 6 Dual-Band AX1800 Speed | Up to 200 Client Devices | 802.11ax | Insight Remote Management | PoE+ Powered or Included AC Adapter

  • WiFi 6 Dual-Band AX1800 speed, coupled with MU-MIMO technology, supports up to 200 client devices and 2,500 sq. ft. of coverage.
  • Connect wired Ethernet to the 2.5G port for maximum speed..
  • Simplified deployment with PoE+, or power using the included power adapter..
  • Includes 1 year FREE NETGEAR Insight subscription for remote management from anywhere. Setup, configure, and manage with the NETGEAR Insight app..
  • Includes WPA3, network and client isolation, and rogue AP detection..
  • Including up to 8 SSIDs, load balancing, band steering, and assisted roaming..
Check Stock

Reidubo 6 Port Ethernet PoE Switch with 4-Port PoE, 2 Uplink Port, 100Mbps, 75W, Unmanaged, Plug and Play, Extend & VLAN(Compatible with TP-Link &Ubiquiti Access Point-AP WIFI6)

  • 【2*Uplink Port & 75W】The Reidubo PoE Switch with 2*10/100Mbps uplink ports and 4*10/100Mbps POE ports can transmit data and power at the same time.Reidubo network switch offers whole 75W PoE power output but maximum power for each port is 30W.2*uplink port can connect to NVR, other switches, routers, etc.A wide range of connection options to meet your diverse Internet needs..
  • 【Built-in Power Supply & 4KV Lightning protection】Reidubo 6-port PoE switch built in power supply (75W).power adapter no more needed,which makes the PoE Switch simpler and lighter. Ideal for PoE IP Camera, Access Point, IP Phone and other PD devices..4KV lightning protection design allows your products and equipment to operate stably even in bad weather. Supporting IEEE802.3af/at PoE Protocol, with per port output power of 15.4W/30W..
  • 【Unmanaged Plug and Play &Multiple installation options】Reidubo PoE Switch support automatically detect devices, just plug in the power cord and network cable.Easy setup with no software installation or configuration needed.Supports desktop, wall or rack placement.It can be installed in office, home, and commercial locations, it is the good choice for high bandwidth requirements.
  • 【Intelligent PD Detection& QoS function】The PoE switch w....
Check Stock

TRENDnet 12-Port Gigabit PoE+ Smart Surveillance Switch, TPE-3012LS, 8 x Gigabit PoE+ Ports, 2 x Gigabit Ports, 2 x SFP Slots, 110W PoE Budget, Managed Switch, Long Range PoE+ up to 200m (656 ft)

  • DEVICE INTERFACE: 8 x Gigabit PoE+ Ports.
  • 4-Digit PoE LED display (total power budget, available power, consumption per port).
  • SMART SURVEILLANCE MANAGEMENT: These managed ONVIF switches are optimized for the surveillance industry.
  • surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device..
  • LONG RANGE POE+: Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps.
  • INTEGRATION FLEXIBILITY: Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration..
  • POE DEVICE ALIVE CHECK: Feature that attempts to recover an unresponsive PoE device connected to the switch. If a device(ex. PoE camera) is unresponsive, the switch auto-reboots the PoE port attempting to recover the device.
  • POE POWER: Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices.
  • HARDWARE DESIGN: Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included.
  • SURVEILLANCE MODE: ONVIF switches are optimized for the surveillance industry, provin....
Check Stock

Poe Switch, 10 Port Gigabit PoE+ Switch, Cloud Managed Gigabit Ethernet Switch, 8 Poe Ports @120W, 2 Uplink Ports, APP Smart Managed, Extend to 250M, Overload Protection w/ Port

  • Connect All Your Devices With Gigabit Switch: STEAMEMO gigabit PoE ethernet switch offers 10*10/100/1000 Mbps Base-TX RJ45 ports, including 8 PoE ports which automatically identifies and powers PoE devices. Built-in power supply makes adapter no more needed, easier to use..
  • Easy To Set-up And Cloud Managed PoE Switch: Connect devices securely, 10 port visibility, and simple cloud management with the SSC Switch mobile app.
  • Alerts for connectivity problems and remote troubleshooting tools when needed. One-key to remote PoE function with mobile APP.
  • Remote Access, feel free to Live check and solve the problems with your family or friends via SSC POE Switch App wherever you are..
  • Cloud Managed Ultra-Far Transmission ethernet PoE+ Switch: One-click to turn on Ultra-Far mode, Cloud Managed PoE switch will deliver power up to 250 meters, improve the network performance and poor transmission quality, easily solves problems such as monitoring freezes. Perfect for IP cameras or access point deployment in large areas..
  • Vlan mode & Remote detection: Apply bulk settings to switch ports, Vlans, ISO. Quickly check the working status of the switch’ each port. You can know the network performance and data transmission status of each port of the switch by detectin....
Check Stock

YuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play

  • 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
  • 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
  • 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
  • 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
  • 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check Stock

TRENDnet 8-Port Gigabit Long Range Poe+ Switch, TPE-LG80, 65W Poe Budget, Ethernet/Network Switch, Long-Range Poe+ Extends Range Up to 200M (656 ft.), 16 Gbps Switching Capacity, Lifetime Protection

  • ETHERNET PORT CONFIGURATION: 8 Port Gigabit Long Range PoE+ Switch includes 8 Gigabit PoE+ ports provide a 16Gbps switching capacity to support edge network installations..
  • PoE+ POWER: A 65W PoE power budget supports up to eight Power over Ethernet devices. TPE-LG80, delivers data and power over Ethernet cables to PoE devices such as access points, VoIP phones, and IP cameras..
  • PoE and PoE+ SUPPORT: It supports both PoE and PoE+ devices with a 65W PoE power budget..
  • LONG RANGE PoE+: Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations..
  • PORT ISOLATION: Ideal for surveillance networking applications, the DIP switch also enables port isolation.
  • LOW-NOISE OPERATION: Fanless design lowers energy consumption and eliminates operating noise.
  • PLUG-AND-PLAY: Easy setup, simply power up the switch and plug in connected devices.
Check Stock

TRENDnet 24-Port Gigabit PoE+ Switch 24 x Gigabit PoE+ Ports 370W Power Budget 48Gbps Switch Capacity RackMount Kit Included Ethernet Network Switch Metal Lifetime Protection Black TPE-TG240G

  • ethernet port interface: 24 x gigabit poe+ ports..
  • poe power budget & switch capacity: the large 370 w poe power budget supports up to 30 watts of poe power per port and all gigabit ports produce a 48 gbps switching capacity and supports jumbo frames up to 10 kb.
  • poe camera flexibility: the 24-port gigabit poe+ network switch recognizes non-poe, poe (15.4 w), and poe+ (30 w) cameras (or other poe devices) and supplies the required amount of power automatically.
  • rack mountable: this network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit with rack mount brackets included for installation..
  • operating temperature: this 4-port gigabit poe+ ethernet switch is rated with an operating temperature range of 0 – 40 °c (32 - 104 °f)..
Check Stock

TRENDnet 16-Port Gigabit PoE+ Switch, 16 x Gigabit PoE+ Ports, 246W PoE Power Budget, 32 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG160g

  • ETHERNET PORT INTERFACE: 16 x Gigabit PoE+ ports..
  • POE POWER BUDGET & SWITCH CAPACITY: The large 246 W PoE power budget supports up to 30 Watts of PoE power per port and all Gigabit ports produce a 32 Gbps switching capacity and supports Jumbo Frames up to 10 K.
  • POE CAMERA FLEXIBILITY: The 16-Port Gigabit PoE+ Network Switch recognizes non-PoE, PoE (15. 4 W), and PoE+ (30 W) cameras (or other PoE devices) and supplies the required amount of power automatically.
  • RACK MOUNTABLE: This network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit and rack mount brackets included for installation..
  • OPERATING TEMPERATURE: This 16 port gigabit PoE+ Ethernet switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F)..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection..
Check Stock

4 Port in-Wall Gigabit PoE Extender with IEEE 802.3bt Uplink - Power Over Ethernet Switch Wall Plate with Full Passthrough VLAN Computer Network IP Camera Feed Internet Office VoIP

  • 4 PoE+ ports on one network cable run. 60 Watt max PoE+ switch powers up to four IEEE 802.3af or two 802.3at IP phones, WiFi access points, or other low voltage devices over 600 feet from the PoE source..
  • An in-wall PoE passthrough switch opens up opportunities. Our 4 port PoE switch lets you add devices and capacity anywhere on your network, without the cost of adding extra lines and expensive infrastructure..
  • Wall mount PoE switch fits flush to wall boxes for a clean, stylish install. Install this power over ethernet switch into any standard electrical wall box for complete integration into your home or office..
  • Mount the PoE extender in any remote office, dorm room, or hotel room. Functions as a network switch for office VoIP phone systems, multiple live IP camera feeds, and anywhere that needs a little extra power and network capacity..
  • Covered by an industry leading 1-year manufacturers warranty and lifetime technical support with a PoE Texas expert. Please email or call 512 479 0317.
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ...MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODELS: Previous Raspberry Pi boards do not feature the onboard PoE header and will not be compatible with this device! Raspberry Pi 4 requires the n....
Check Stock