Top Networked Serial Converter

DaFuRui 5PCS MAX3232 RS232 to TTL Converter 3.3V to 5V DB9 Female RS232 Serial Prot to TTL Converter Module Root Connector for Equipment Upgrades Like DVD

  • ★MAX3232 3.3V to 5V DB9 Male RS232 Serial Prot to TTL Converter Module..
  • ★Program the type of microcontroller: STC/STM32 / NXP / Renesas MCU / NEC..
  • ★Used in radio modification,mobile phone brushing,XBOX360 brushing machine,GPS,DVD brushing, hard disk repair,set-top box upgrade..
  • ★Package Include:5PCS x MAX3232 RS232 to TTL Serial Port Converter Module and 20pcs Dupont Lines..
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

Avital 4105L Avistart Remote Start with Two 4-Button Controls Bundle with Avital 4115L Avistart Remote Start with Two 1-Button Controls

  • dedicated A-to-D converter samples your vehicle’s voltage hundreds of times each second, eliminating the need for a tachometer wire connection.
  • Product 1: D2D serial data port Quickly connects your Avital system to other interface devices via D2D cable.
  • Product 1: XCR onboard relays Extreme capacity remote start relays are built-in to Avital remote start systems..
  • Product 2: D2D serial data port Quickly connects your Avital system to other interface devices via D2D cable.
  • Product 2: XCR onboard relays Extreme capacity remote start relays are built-in to Avital remote start systems..
Check Stock

XIAOSHI 9 Pin RS-232 DB9 Male to Male / Female to Female Serial Cable Gender Changer Coupler Adapter Pack (5pcs Female to Female)

  • DB9 9 Pin D-Type Female to Female Gender Charger Converter Adapter. Can also be used to connect RS-232 serial cables, Compact Slim line Adapter..
  • Also used as a couplerSupport RS 232 Serial interface (DB9).
  • Package： 5x 9 Pin Female to 9 Pin Female Adaptor.
Check Stock

DTECH USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Supports Windows 11 10 8 7 XP Mac -1.5 Feet

  • USB to RS485/RS422 converter It easily lets you connect RS485 or RS422 device directly to your Laptop PC computer USB port (built with LED....
  • USB to RS485 cable adapter is Ideal for industrial environment -provides 600w surge protection and 15KV ESD isolated protection on signal pins to....
  • rs485 serial to usb converter is with high performance quality processor chip (FTDI-chipset FT232) and I/O auto conversion circuitry which makes RS....
  • 1.5 ft serial RS-422 RS-485 to USB adapter cable supports windows 11 10 8 7, Mac and more.
  • There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system.
Check Stock

StarTech.com 1 Port USB to Serial RS232 Adapter - Prolific PL-2303 - USB to DB9 Serial Adapter Cable - RS232 Serial Converter (ICUSB232V2)

  • MAXIMIZED PORTABILITY: This USB to serial RS232 adapter converts a USB port into an RS232 DB9 serial port to connect to, monitor, and control a serial device.
  • BROAD COMPATIBILITY: Compatible with your USB 1.0 or 2.0 ports, this USB to RS232 converter works with your Windows, Mac or Linux system.
  • FAST TRANSFER SPEEDS: Experience fast speeds with this USB to DB9 serial adapter, supporting a Baud Rate up to 921.6Kbps.
  • PORTABLE DESIGN: Powered by a USB port, this USB to RS232 serial adapter cable features a lightweight design that conveniently fits into your carrying case, making it ideal for professionals on the go.
  • Install in almost any laptop or desktop computer through broad operating system compatibility, including Windows 8.
  • Communicate efficiently with connected devices with high-speed 921Kbps support.
  • Portable and lightweight, the USB-Powered design requires no additional power adapter.
  • USB to Straight-Through RS232 DB9 Serial Adapter.
  • Compatible with Windows 8, Mac OS X and Linux.
  • USB-powered - no external power adapter required.
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

StarTech.com USB to Serial RS232 Adapter - DB9 Serial DCE Adapter Cable with FTDI – Null Modem - USB 1.1 / 2.0 – Bus-Powered (ICUSB232FTN)

  • MAXIMIZED PORTABILITY: This USB to serial RS232 adapter with FTDI features a single cable design removing the need for additional adapters and cables.
  • CORRECT DTE/DCE CONFLICTS: Convert your available USB port into a null modem RS232 DB9 serial port, resolving any DTE/DCE conflicts.
  • BROAD COMPATIBILITY: Compatible with your USB 1.0 or 2.0 ports, this RS232 converter works with your Windows, Mac or Linux systems.
  • FAST TRANSFER SPEEDS: Experience fast speeds with this serial adapter, supporting a Baud Rate up to 921.6Kbps.
Check Stock

StarTech.com 4 Port USB to Serial RS232 Adapter - Wall Mount - Din Rail - COM Port Retention - FTDI USB to DB9 RS232 Hub (ICUSB2324I)

  • INDUSTRIAL STRENGTH: Built to withstand harsh environments, this 4 port USB to serial RS232 adapter has a rugged all-metal enclosure for added durability in industrial settings.
  • COM RETENTION CAPABILITIES: For added convenience, this FTDI USB to DB9 RS232 hub features COM retention so COM port assignments are maintained during reboots.
  • PLUG AND PLAY INSTALLATION: This DB9 serial converter is powered by an available USB port / cable so no external power adapter is required.
  • INSTALLATION OPTIONS: This USB serial adapter has integrated wall mount brackets and included DIN Rail clips for versatile mounting options.
Check Stock

OUOU 9 Pin RS232 DB9 Male to Female Serial Cable Gender Changer Coupler Mini Adapter Pack of 5

  • Connector 1: (1) DB9 Female Connector 2: (1) DB9 Female.Quickly change the gender, or join two cables together..
  • Product Scope: Applicable to serial 9-pin or 9-hole adapter, can be connected to COM line or equipment. There are many devices that can be connected, such as: computer, tablet, programmer, microcontroller, brush line, computer room and other serial devices..
  • Product features: high-definition video signal transmission, no solder joints, low attenuation..
  • This is a fast and economical method of changing the gender on ‘D’ type ports. Connect two female serial cables together, or convert a 9 pin female/male connection to a 9 pin male/female connection ..
  • You will get a 5 pack VGA converter,Just Feel Free to Contact Us If You Have Any Problem,We Will Solve for You Within 24 Hours..
Check Stock

EVISWIY PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack

  • 【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port..
  • 【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything..
  • 【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter..
  • 【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc..
Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....
Check Stock