Top New Water Cooled Pocket

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

WeldingCity TIG Welding Torch Accessory Kit Large Gas Lens Setup 1/8 Collet-Large Gas Lens-Cup-Gasket-Back Cap for Torch 9 20 and 25 Series Lincoln Miller Hobart ESAB Weldcraft CK AHP T45

  • Premium TIG welding torch accessory kit (large gas lens set-up) for air-cooled and water-cooled TIG torch 9, 20 and 25 series for use with Tungsten....
  • Accessory kit contains torch consumables 13NL-series collets and 45VS large gas lens collet bodies (0.040", 1/16", 3/32" and 1/8"), 53N/57N-series....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 9-series (125-amp), water-cooled 20-series (250-amp) and 25-series (200-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

BestEquip Cooling System CW5200DG Industrial Water Chiller CW-5200 White

  • Product Parameter: The CW-5200DG industrial water cooler chiller is 8.5L capacity, Using standard R470C refrigerant,10L/max.flow, Precision:....
  • Efficient Cooling Fan: The water cooler chiller has two professional forced air-cooled radiators, high heat dissipating capacity, and not easy to be....
  • Constant & Intelligent Temperature Mode: CW-5200 series industrial chiller can be used to cool high-power lasers. Two working temperature modes are....
  • Various Alarm Functions: This professional industrial chiller has multiple warning protection mechanisms such as water flow alarm protection, high/low....
  • Multiple Application: CW-5200 Series professional industrial water cooler machine is suitable for small water-cooled cooling devices requested....
Check Stock

Rage RC B1207 Super Cat 700BL Brushless RTR Catamaran Boat

  • Adrenaline-pumping speeds of up to 40mph.
  • Brushless, water-cooled 2000Kv motor and 40A water-cooled ESC.
Check Stock

Fast Recovery Diode Module Full Crimped Structure MBRP400200CT 200A 25V -55~150℃ Rectifier Diode Module

  • FULL CRIMPED STRUCTURE: The diode module has full crimped structure with excellent temperature characteristics and power cycling capability.
  • AIR-COOLED AND WATER COOLING: The full crimped recovery diode block below 200A are forced air-cooled, modules above 300A are selected for air-cooled and water cooling.
  • STABLE PERFORMANCE: High quality of the diode recovery module can provide stable performance. Simple installation, easy to use and maintain.
  • AC 2500V: The recovery diode module is easy to use, the chip is electrically insulated from the backplane, 2500V AC voltage.
  • SPECIFICATION: ​Forward Average Current IF (AV): 200A.
  • One-cycle Forward Non-repetitive Surge Voltage IFSM: 25V.
Check Stock

Maxima 41901 MTL-R 80WT Motorcycle Transmission/Clutch Fluid - 1 Liter Bottle

  • MTL has been significantly improved with new technologically advanced additive systems that drastically improve clutch life and reduce slippage.
  • While accomplishing this, MTL provides outstanding anti-wear protection and lubrication to the transmission as well.
  • This new formula has been extensively tested on the race track by many of the nations top mx teams and tuners and is now available to the serious....
  • For all air and water-cooled 2-cycle and 4-cycle transmissions with wet clutch systems.
  • Also, designed and tested for wet brake systems.
Check Stock

Maxima 40901 MTL-E 85WT Motorcycle Transmission/Clutch Fluid - 1 Liter Bottle

  • MTL has been significantly improved with new technologically advanced additive systems that drastically improve clutch life and reduce slippage.
  • While accomplishing this, MTL provides outstanding anti-wear protection and lubrication to the transmission as well.
  • This new formula has been extensively tested on the race track by many of the nations top mx teams and tuners and is now available to the serious competitor.
  • For all air and water-cooled 2-cycle and 4-cycle transmissions with wet clutch systems.
  • Also, designed and tested for wet brake systems.
Check Stock

LIANQIAN Automatic Electric Ice Crusher and Ice Shaved Machine,1200W Water Cooled Countertop Snow Cone Slushie Maker With Stainless Steel Blade, Snowflake Machine For Commercial Use-485LBS/Day

  • ...ectric Ice Crusher and Shaved Ice Machine is a commercial-grade snow cone machine that is supported to produce up to 485 lbs of shaved ice per day.Works perfectly with all Nostalgia snow cone kits - try the Snow Cone Kit, Snow Cone Syrups, or the Straws and Cups..
  • 【Water-cooled High Efficiency】It features a water-cooled countertop design, unlike air-cooled machines, which can overheat and shut down if used continuously, water-cooled bingsoo machines can operate for longer periods without any issues. This helps to ensure that the machine can keep up with the demand for shaved ice, even during peak hours.No more pre-freezing ice cubes..
  • 【Stainless Steel Blade】This ice crusher uses high quality stainless steel bla-des to provide high efficiency and crush ice faster. High power 1200W motor ensures high speed to make ice slushie,continuously making a large amount of nice fluffy snow for summer fun desserts in a short time.Release your hands!.
  • 【0-60 Adjustable Speed】The snowball machines by adjusting the speed and uses different syrups, smoothies with different tastes and thicknesses can be obtained.Perfecting for mak....
Check Stock

49CC 2-Stroke Mini Motor Air Cooled Racing Engine For Pocket Bike Mini Dirt Bike ATV US (49cc with Fuel Tank)

  • ➤Stroke: 2-stroke. Gas-oil Mix Rate: 25:1. Bore: 44mm. Gear Box Reduction Rate: 3.1 : 1. Displacement: 49cc..
  • ➤Cylinder Numbers: Single cylinder. Start Way: Recoil pull start,new style recoil,easy to pull start. Recoil Starter Material: New style easy pull starter. Cooling: Air forced cooling. Spark Plug Size: L7T L7TC..
  • ➤49cc mini motor air cooled racing engine capable of achieving 40mph dependant on user weight and terrain..
  • ➤ Engine is COMPELTE WITH High performance cylinder head, plug, powder coated metal pull start, air filter and 14mm carburettor,Balanced crank, balanced flywheel, ported piston windows, up-rated CVT transmission unit..
  • ➤For 49CC 2 Stroke Pocket Bike, Mini Dirt Bike, ATV or Scooter..
Check Stock

MATX PC Test Bench Computer Water Cooling Open Frame Overclock Air Case Mini Aluminum HTPC Support Graphics Card

  • Case structure：MATX，Supporting integrated water-cooled installation (120 240 water-cooled drainage).
  • Package including：1 x assembly parts of computer case.
Check Stock

Miller Weldcraft A-200 Redhead TIG Torch Kit Flex 12.5 Rubber WP-R26F-12-R

  • Eliminate the expense of a water-cooled system. The air-cooled capability pairs reliability with cost-effectiveness for all field applications..
  • Maximum versatility. Utilize the Redhead Series torches in a variety of welding applications without adding expenses..
  • Flexibility. Using the A-200 Flex, the flexible neck easily adjusts to any angle for better torch control in limited-access joints..
  • Torch packages include torch body, handle, power cable and long back cap..
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
  • 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock