Top Ni Alloy Tube

Mophorn 1/4 to 7/8inch Tubing Bender 7 Heads Nylon Hydraulic Pipe Bender Copper 90 Degrees Multi-function 6-22mm Manual Ratcheting Tubing Bender Set with Bending Function Carrying Box

  • 90° Tube Bending: The ratcheting tube bender can easily and smoothly bend the diameter of 6, 8, 10, 12,16, 20, 22 mm tubes to 90 degrees. Mechanical....
  • 1/4"-7/8" Bending Range: We provide 7 interchangeable tube bender heads, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy....
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good....
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with....
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum tubes. It is widely used in sanitary and heating installations, floor....
Check Stock

N/P 52in 2PCS Kayak Paddles,Aluminum Alloy Thickened Plastic Inflatable Boats Oar

  • Light Weight: Aluminum alloy tube, made of aluminum, lightweight, smooth, super load-bearing..
  • Pinball Circlips: Using pinball circlips, easy to install and remove..
  • Great Endurance: Thickened blades, scientific design, fast sliding, great endurance, more durable..
  • 3CM Diameter: 3cm diameter, thicker aluminum alloy tube, thicker tube wall, more durable..
  • Wide Uses: Can be used for boats, kayaks, rafts, jet skis, suitable for recreation and emergency use..
Check Stock

Digital Microscope Extension Tube, See Entire Coin, Extender Pole for Elikliv DM10 DM9 DM5 DM4

  • 【Microscope Extension Tube, See the Entire Coin Clearly】 This extension tube can extend the length of the digital microscope stand. It can obtain a wider and higher field of view under microscope observation. Very suitable for coin and stamp inspection..
  • 【Compatible with Most LCD Digital Microscopes】Elikliv extension tube is compatible with Tomlov, Elicliv, Opqpq or other brands of digital microscopes.
  • 【Sturdy Aluminum Alloy Material】 It is made of aluminum alloy material, which makes this extension tube durable and beautiful. Strongly support your digital microscope.
  • 【Small and light】 The length of the microscope extension rod is about 6 inches (15.2 cm), and the net weight is about 5.3 ounces (220 grams). Light weight, easy to carry and store.
  • 【Easy installation】 Just screw the extension tube to the digital microscope. With extension rods, you can easily achieve higher-angle digital microscope view.
Check Stock

ZTZ Bike Suspension Fork 20"*4.0 Tire for Mountain Bike Air Double Shoulder Downhill Rappelling Shock Absorber MTB/QR/AM Fat Snow Bike Forks

  • Material：Suspension fork is made of 7075 forged Aluminum alloy fork leg Magnesium alloy. To make the outer front fork tube more stable and sturdy..
  • MTB Bike Air Fork, AM Double shoulder Suspension, A-pillar PM disc brake, travel 135-140mm.Oil and gas structure.
  • 20 inch Mountain Bike Suspension Fork, Straight tube, Manual lock..
  • Steering tube 28.6(1-1/8inch)*220mm, magnesium alloy fork leg(135mm wide) QR Axle: 9*135mm..
  • Pneumatic system: According to the rider's weight and road conditions, adjust the most comfortable pressure value to get the best experience, providing good conditions for long-distance riding.
Check Stock

MIKEDE 40x40x20mm Neodymium Block Magnet, Super Strong Permanent Magnet Disc Powerful Rare Earth Magnets- One Piece

  • 【Perfect Size】- Length: 40mm / 1.6inch, Width: 40mm/1.6inch, Thickness: 20mm / 0.8inch.
  • 【High Quality】- Our strong magnets are made from strong neodymium-iron-boron alloy (NdFeB) and have a stylish nickel coating (Ni-Cu-Ni) with an appealing silver surface that doesn't rust or scratch.
  • 【Powerful Magnet】- The heavty duty neodymium magnet is made of strongest magnetic material, which is bound meet your demands! Our premium large rare earth magnets can handle your project or task.
  • 【Multiple Uses】- The big round block magnets are Ideal for DIY craft projects, science project magnets. Use these crafts magnets for anything, including finding studs in your wall, fastening, lifting, hanging objects, various projects & presentations, education, & more.
  • 【Professional Brand】- Made under ISO 9001 Quality Systems. We are professional magnet seller and you can find any magnets you want in our store. Search MIKEDE MAGNETS. Find the permanent magnets you want!.
Check Stock

QYQRQF 3/4\ Tube Cutter Pipe Cutter Wheel Blades

  • This Tube Cutter used for cutting copper pipe 3/4''.
  • This Tube Cutter is made of strong construction Zinc alloy..
  • This Tube Cutter can be adjusted and tightened as turning by one hand..
  • This Tube Cutter is mini and very easy for use and storage..
  • This Tube Cutter can cut pipe accurately and easily..
Check Stock

Heyiarbeit RC Antenna Tube Green with Green Mount and Cap for RC Boat 5pcs

  • 【Parameters】- Tube Inner Diameter: 2mm/0.08".
  • Material: Plastic Tube, Aluminum Alloy Mount.
  • 【Good Material】-The antenna base is made of high-quality aluminum alloy material, waterproof, wear-resistant, corrosion-resistant, sturdy and durable.
  • The antenna tube is made of high-quality plastic, sturdy and durable, and has good flexibility, It protects the fragile receiving antenna and protects the antenna from damage, Won't break in a collision.
  • 【Easy to Use】-This antenna tube is easy to trim and use, you can cut it to fit the size, well-made, durable, very suitable for protecting your antenna.
  • antenna base can be used as a good support for the transmitting antenna, which helps to fix the receiving antenna at a proper angle to obtain the best signal.
  • 【Application】- RC antenna mount is compatible with DIY RC model, such as RC boat, RC vehicles and so on.
  • 【Package Contents】- 5 pcs x RC Antenna Mount +5pcs x Antenna Tube.
Check Stock

Dragon Fire Performance Ignition Tune Up Kit Spark Plug Wire Set & Iridium Spark Plugs For 1999-2017 Chevrolet GM Chevy LS LSX LS1 LS2 LS3 LS6 LS7 OEM Fit Kit

  • MANUFACTURER: Dragon Fire Performance MODEL: Tune Up Kits.
  • SPARK PLUGS: Latest Evolution Iridium High Performance | PLUG WIRES: 10mm / 100 Ohms.
  • Compatible with 1999-2017 Chevrolet LS Series V8 (Round or Square Coil).
  • FEATURES: Spark Plugs: Iridium for industry leading performance in high temperature engines with quicker acceleration and longer life. Plug Wires: High Heat Silicone - Ni-Chrome Alloy (Ni-Cu) – Kevlar Core - High Tensile Strength Fiberglass Protection Mesh - Rated to 600°F - Long Service Life – Maximum Voltage: 80,000 VAC – Direct OEM Replacement.
  • WIRE LENGTHS – 8x10.5" / SPARK PLUGS - Full Set 8pcs (Pre-Gapped).
Check Stock

40x40x20mm Super Strong Neodymium Block Magnet, N52 Permanent Magnet Disc, The World's Strongest and Most Powerful Rare Earth Magnets - One Piece

  • HIGH QUALITY- Made from strong neodymium-iron-boron alloy (NdFeB) and have a stylish nickel coating (Ni-Cu-Ni) with an appealing silver surface --- All the magnets are magnetized axially and have a maximal operating temperature of 80 degrees Celsius..
  • EXTREME DURABILITY - Nickel-Copper-Nickel triple layer coating for superior durability..
  • MULTIPLE USES - These Magnets are Ideal for DIY craft projects,science project magnets. Use these rare earth magnets for anything, including finding studs in your wall, fastening, lifting,hanging objects, various projects & presentations, education, & more..
  • DIMENSION - Diameter 40mm x thickness 20mm(approx.1.57"x0.79" ).Tolerances: 0.2mm x 0.2mm..
  • 100% MONEY-BACK GUARANTEE! If these magnets don't live up to your expectations, don't worry. You can send them back for a full, complete refund of every penny you paid! You take NO RISK when you purchase with us today!.
Check Stock

RUNCL Fishing Hook Remover, Long Nose Hook Extractor, Fish Release Tool for Saltwater/Freshwater, Ice Fishing Dehooker, 10.6/13.6 Inch

  • 【10.6" Aluminum Alloy Long Nose Fish Hook Remover】: Our this fishing hook remover equipped with longer nose than needle nose pliers, can reach deep into the fish mouth, never worry about injury. The aluminum alloy tube is much more firm and durable than plastic ones. Size: Total Length: 10.6inch(27cm), Tube Length: 9inch(23cm).
  • 【Squeeze Out Fish Hook Extractor】: The fishing hook extractor constructed with spring-loaded trigger handle, makes it more convenient to take off fishing hooks with only just one hand even in a wet or cold situation, easy to work with.
  • 【Stainless Steel Rounded Hook】: The removal hook is designed to be more rounded, less harm to fish mouth and fishing line. And there're two small groove on the tube opeing, help to fix the fish hook firmly and avoid slippage. Stainless steel material avoid rust and keeps a long last life time.
  • 【Widen Hollow Out ABS Handle】：Ergonomic design, features in widen handle with anti-slip rubber strips, offers a solid grip even with wet hands.
  • the hollow-out handle made of high strength ABS significantly reduces the weight without sacrificing strength and....
Check Stock

uxcell 304 Stainless Steel Capillary Tube Tubing 7mm ID 8mm OD 300mm Length 0.5mm Wall

  • Capillary Tube is a long, narrow tube of constant diameter. The word “capillary” is a misnomer since surface tension is not important in refrigeration application of capillary tubes..
  • Exceedingly demanded in precise apparatus or instruments,automatic instruments,eletronic parts,oil or gas plants and other industries..
  • Stainless Steel Tube is a good choice for most applications due to greater corrosion resistance and precision..
  • Alloy 304 stainless steel is one of the most common stainless steel and it is having nickel and chromium alloy metal as non-iron constituents..
  • Please check the correct size before purchasing..
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock