Top Nickel Plated Lag Screws

Masters Of Hawaiian Slack Key Guitar Bk/CD

  • For solid or slotted peghead steel-string guitars. Great for Your Project or Repair job. Can be used for a 6-string guitar or Right/ treble side of a 12 string guitar (some calls it left side, but you will receive what shows in the photos).
  • Shafts diameter 6mm, space between shafts 24mm (center to center), 1st - 6th shafts space 123mm (center to center),.
  • They're versatile: the string posts have double holes, so you can install these tuners on solid or slotted pegheads. Nickel-plated with metal knobs..
Check Stock

SpzcdZa 100pcs Phillips Chicago Screw Binding Screws Posts Assortment Kit for Scrapbook Photo Albums Extension Posts and Screws Craft and DIY Leather Decoration Bookbinding(M5 x10-60)

  • ➤High quality 50sets chicago binding screws assortment kit.
  • Material: Metal, Nickel Plated, hard, sturdy and durable, with nickel plated on the surface, not easy to get rust and erosion.
  • ➤Chicago Binding Screws Size Include: In this set, it include 6 size of binding screws total 100pcs are sorted packed in a plastic box to avoid mess. Which diameter is 5mm(3/16in), length are 10/20/30/40/50/60mm. Thread length are 5mm..
  • ➤Chicago Screws Also named as Binding Screw, Easy to Use, Widely Used As The Book or Photo Print Albums Binding Supplies. It Also Can Be Used in the Production of Saddles and Leather Purses..
  • ➤This set of screw posts are easy to install, delicately designed Phillip head, standard slotted head, applied with standard screwdriver or use a drill to punch a hole of 5mm diameter, then you can attach them together, it allow you to open and re-attach pieces when needed.
  • ➤Quality Assurance:If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time..
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

SP Bel-Art Frigimat Junior Dry Ice Maker; U.S. Model (F38886-0000))

  • ...arent polycarbonate body that secures without clamps, screws or tools ensuring easy removal of the solid block of dry ice and disconnection from the CO2 cylinder.
  • Lightweight body is never as cold as the dry ice, even when filled.
  • allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to the CO2 cylinder valve which is used to regulate gas flow.
  • Includes a 1.8m (6ft) nickel-plated copper connecting tube with standard CGA 320 thread coupling for easy attachment to a LCO2 cylinder.
  • Read through Instruction Manual (PDF) under Technical Specification before installation.
  • Attach to a liquid CO2 cylinder equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes.
  • each 50lb. cylinder makes from 10-16 blocks of dry ice.
  • Read through Instruction Manual (PDF) under Techni....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Dreneco T-Slot Bolts Stainless Steel Hammer Head Bolt T Bolts for Woodworking, M8×50mm,3 pcs

  • Thread Diameter: 8mm (M8), Bolt length 35mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Material: high quality nickel plated carbon steel.Antirust and long life. High quality T head screws for aluminium extrusions, suitable for 40mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

Prime-Line MP11143-1 Pin Hinge

  • Used for a variety of interior and exterior swinging doors.
  • Constructed from stamped steel with satin nickel-plated finish.
  • Dimensions are 4 in. width x 4 in. height with square corners.
  • Removable pin allows for easy installation and removal of door.
  • Flat head screws recess in hinge screw holes.
  • Includes #9 x 1 in. flat head tapping screws.
Check Stock

Damaged Screw Extractor Kit, Stripped Screw Extractor Set, Drill Bit Set, Broken Bolt Extractor and Screw Remover Set,Made From H.S.S. 4341#, Set of 6 Pcs Stripped Screw Remover

  • ... #4) Works with any Drill and any Size Screw or Bolt. Such as Common Hexagon Bolts, Lag Screws, Wood Screws, Hexagon Socket Screws, Machine Screws, Sheet Metal Screws and Other Screws, This Damaged Screw Extractor can Remove All Common Sizes of Damaged, Stripped or Broken Screws..
  • [HIGH QUALITY HSS 4341 AND TITANIUM PLATED] This Damaged Screw Removal Tool Kit Screw Extractor is Made of HSS 4341 High-Quality Speed, The Hardness is Up to 65 HRC, The Density And Hardness Are About 20% Higher Than The Ordinary Steel in The Market.
  • The Hardness is High, And it is Durable , Any Damaged Screws Can be Easily Removed. And We Plated a Layer of Titanium Extractor on it to Make it not Easy to Rust, Easier to Store, and More Beautiful..
  • [EASY OPERATION] A Damaged Screw Adapter can get the Job Done in Two Simple Steps , Choose a Bit Smaller Than the Damaged Screw, then Start the Extraction with a Drill/Polishing Tip, And then Drill a Clean Hole (Reverse and Low Speed). Next switch the drill bit to the Extraction Tip and Use Consistent Downward Pressure (Still Reverse and Low Speed) To Make the Extraction tip "bite" the Damaged Screw, and Then you can Easily Remove the Screw..
  • [QUAlITY AND PEACE OF MIND TOOLS]：Keep this Screw Remover Setting in your Toolbox, It will....
Check Stock

Fender Vintage-Style Standard Series Stratocaster Tremolo Assemblies

  • Nickel-plated steel vintage-style bridge assembly with six bent "Fender" stamped saddles.
  • Assembly includes saddles, intonation screws/springs, and saddle height adjustment screws.
  • Tremolo block will accept standard 10/32 thread tremolo arm.
  • Assembly features 2-1/16" bridge mounting spacing.
  • Used on most Standard Series, Deluxe Roadhouse/Lonestar, and Blacktop Series Stratocaster models (Mexico) manufactured '06-Present.
Check Stock

Amazon Basics AB-4011 Nickel Plated steel Soft Close Hinge 1/2 Inch Overlay 10-Pack 1/2-inch 10 Count

  • 1(one) #10 x 3/4-inch pan head screw, 2(two) #6 x 5/8-inch flat head screws.
  • 1/2" overlay hinge attaches to inside of cabinet door and adjacent interior cabinet wall.
  • Adjustable screws allow for 3-way mounting refinement.
Check Stock

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock