Top Nimh Nicd Li po Lithium

HTRC C240 Battery Charger Discharge Duo AC 150W DC 240W Dual Channel 10A RC Balance Charger Lipo Li-ion Car Battery Charger

  • Twin-channel, charge two different kinds of batteries simultaneously.
  • Automatic identification of Li-Po batteries cells counts.
  • Built-in cooling fan for efficient heat dissipation.
  • Balancer: individual-cell-voltage balancing, cell voltage monitoring.
  • Multiple charging modes: Lipo/Li-ion/LiFe/LiHv: balance charge, charge, fast charge, storage, discharge.
Check Stock

RC Car Battery Charger Nimh NiCd Battery Packs Charger 4.8v 7.2v 8.4v 9.6v | 4.8v - 6.0v Rc Receiver Rx Battery Pack Charger

  • The 12V 400mA-700mA NiMH battery charger can charge NiMH/NiCd battery packs that are 4.8V, 6V, 7.2V, 8.4V, 9.6V 12.0v (2-8 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries pack, DO NOT charge LiPo batteries, li-Ion battery or any type of lithium battery.
  • AC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device.
  • RC Car Battery Charger for NimH NiCd battery pack froAC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device.
  • There is light indicator on the charger and tells charging status. Solid red light means charging is processing, green light means charging finised. If you see flash red light means the polarity of battery is reversed or charger cannot charge your battery.
  • ADVANCED PROTECTIONS - Charger has built-in safety protections against reverse polarity, short circuit, and over-current protection. The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence under 12-month warranty..
Check Stock

Lithium-Ion & Ni-cad Battery Charger for Craftsman DieHard C3 19.2 Volt XCP 140152004 130279005 Battery

  • This device is Multi-Chemistry, charging both Craftsman Ni-Cd NiMH or Lithium-Ion chemistry batteries..
  • Compatible With Craftsman 19.2 Volt Battery C3 DieHard NiCD NiMH Lithium 130279005 1323903 11375 11376 315.115410 315.11485((Not fit model 9.6-volt....
  • Universal 110V to 240V voltage input, wide compatibility to support 9.6V-19.2V batteries, DC output 2A for NI-CD batteries and 2.7A for Li-ion....
  • Indicator lights that show the status as batteries are charged and maintained.
  • Overload protection protects from damaged battery cells, Durable and....
  • 00% QC of this battery.60 days money back. 18 months warranty. 24*7 hours prompt customer service..
Check Stock

HTRC Lipo Charger 1-6S Touch Screen Dual Discharger AC150W DC240W 10A T240 Fast Balance Battery Charger for RC Li-ion Life NiCd NiMH LiHV PB Smart Battery

  • ...e the battery pack balance charger on LiPo/Li-ion 3.7V-22.2V（1-6 cell）.
  • Smart Battery: I,II,III. So it is very useful..
  • Multiple Functions -Except charge, balance and discharge, it also has these functions: Terminal Voltage Control.
  • Lithium Battery Capacity & Voltage Checking.
  • Battery Internal Resistance Checking,Let you know when a cell is going bad.
  • Data Storage and Memory Loading(Store up to 20 packs in memory).
  • Digital DC Power.Automatically identify the cells counts of lithium battery section.Support LiHV battery..
  • High Quality & Safe- Using superior chip and materials to deliver quality performance, and the charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety..
  • What You Get-The battery balance charger comes with 1×battery charger.
Check Stock

Tenergy TB6AC 80W Balance Charger Discharger and Lipo Zipper Bag for Charging and Storage 8.5x6.5x5.7inches

  • Use Tenergy's TB6AC+80W RC hobbies balance charger/discharger and power supply for all of your battery pack types. Use with NiMH, NiCd, LiPo, Li-ion, LiFePO4, and SLA battery packs..
  • This LiPo battery charger comes with octopus multi-charging harness with Tamiya, mini Tamiya, JST, HiTec, EC3, Deans connectors to be compatible with many charging connectors. The package also comes with a power supply..
  • Use the digital balance charger on NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V..
  • Tenergy's large LiPo bag reduces fire hazard when recharging or storing multiple airsoft Lithium-Polymer battery packs..
  • Made with triple-layered flame retardant protection material capable of withstanding up to 2000°F. Measures up to 8.5 x 6.5 x 5.7inches and can store up to 25 lipo battery packs when not used..
Check Stock

Lipo Balance Charger,Battery Charger Discharger with Power Supply for LiPo/Li-ion/Life Battery (1-6S), NiMH/NiCd (1-15S),PB (2-24V),Smart Battery(RC Battery Charger)

  • ...】80W 6A balance Li-Po charger can charge and discharge a variety of batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries..
  • 【Multiple Functions】Lipo Battery charger is built in an independent Lithium Battery Balancer to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function..
  • 【High Quality & Safe】Using superior chip and materials to deliver quality performance, and the charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety..
  • [Easy to Operate]:-View all charging statuses and settings on the Electronic Balance Charger LCD screen as you navigate the modes and selections. Press the "Batt.Type" button to the user settings or select battery type or exit the program, press the "Start" button twice to the parameters setting, press the "Dec." or "Inc." button to switch-over, press and hold the "Start" button to charge battery..
  • [Bonus Accessories]-The AC/DC battery balance charger comes with a DC Crocodile Clip,JST(female), F....
Check Stock

Vgoohobby 19 in 1 RC Car Truck Lipo Battery Multi Charger Adapter Lead Cable Converter Compatible with Traxxas Tamiya RC Car Truck Boat Lipo Battery Charger

  • Powerful AC/DC multi-charger with dual 100W output, ability to charge virtually all battery types, and an intuitive LCD display.
  • Dynamite Dashboard-Smart phone control and monitor via Bluetooth.
Check Stock

Tenergy T180 100W Balance Charger Discharger and Lipo Zipper Bag for Charging and Storage 8.5x6.5x5.7inches

  • ...e charger by tapping the touch screen buttons. Recharge a wide variety of chemistry configurations like NiMH/NiCd 1.2V-19.2V (1-16S), LiPo/Li-ion 3.7V-22.2V (1-6S), LiFepo4 3.2V-19.2V, PB/SLA 2V-20V (1-10S)..
  • LiPO charging bag - Tenergy's large LiPo bag reduces fire hazard when recharging or storing multiple airsoft Lithium-Polymer battery packs..
  • Fire protection design - Charging hole with velcro seal design reduces airflow and oxygen helping to smother flames before it can get out of control while recharging a LiPO battery pack.
Check Stock

Tenergy TN456 Intelligent Universal Battery Charger with 4 Slots, LCD Display, USB Output, Power Adapter, Rechargeable Battery Charger for Li-ion/NiMH/NiCD Rechargeable Batteries

  • All in one charger - The Tenergy TN456 universal battery charger works with different sized cells of NiMH, NiCd or Li-ion. Charge any of these NiMH/NiCd sizes- AA, AAA, A, Sub C, C along with Lithium-ion (Li-ion) sizes- 26650, 22650, 18650, 18490, 18500, 17670, 17500, 17335, 16340 (123A), 14500 (AA), 10440 (AAA)..
  • Personalized charging - With four individual charging slots, the TN456 smart battery charger is not limited by charging in pairs or even same cells. Each charging slot can be personalized to a specific battery to change its settings (mode/charging current). *Recharges only 2 C size batteries at once..
  • Dual modes - Built in are two modes, CHARGE and TEST. The charge mode features current selection (300-1000mA) that allows you to set the charge current for each battery. While the test mode tests the capacity of your battery..
  • Smart design - With just one button, easily toggle between display options to view charge/discharge capacity, battery voltage, charge/discharge current, internal resistance, or elapsed time. The backlit LCD is visible and easy to read. In addition to charging batteries, TN456 also has a USB port that charges your portable devices simultaneously..
  • Backed by a 1-year warranty along with lifetime support from our friendly ....
Check Stock

SUPULSE iMAX B6 Balance Charger Discharger 1-6S AC/DC Lipo Battery Charger Lipo Charger RC Charger RC Battery Charger for NiMH/NiCD/Li-Po/Li-Fo Packs LCD Hobby Battery Charger Smart Battery

  • 【LOAD WITH MULTIPLE ADVANCED FUNCTIONS】Compare to a regular digital balance charger, has function about Li-ion and Li-Po balance charging, fast charging, data storage, cyclic charging to meet with different demand, much more for all of your battery packs..
  • 【WIDE BATTERY TYPE COMPATIBILITY】SUPULSE RC battery charger support various kinds of battery packs like Lipo, Li-Fo, NiMH, Nicd, PO4, SLA, solve the charging problem for different hobby battery. Please choose the right type of battery when charging..
  • 【WIDE CONNECTOR COMPATIBILITY】The multi-connectors cable comes with tamiya, XT60, TRX, T plug, FUTABA, EC 3 and JST make the balance charger compatible with battery packs with these connectors. No need to buy other cables separately..
  • 【SUPPORT MULTIPLE WORKING VOLTAGE】Comes with dual power input port, compatible voltage got AC 100-240V and DC 10-20V, allow more flexible power charging supply. Voltage power for charger and discharger is 80W and current at 0.1-6A /0.1-2A..
  • 【HIGH QUALITY SAFETY DESIGN】This balance charger discharger built in an advanced smart chip to provide you accurately control the charging parameters of the charger to avoid over-current, over-discharge, over-voltage, and short-circuit..
Check Stock

Keeppower Protected 18350 Li-ion Rechargeable Battery Button Top 3.7V 1400mAh 5.18Wh for Flashlight NOT High Drain 2 Pack

  • 18350 900mAh li-ion battery With battery charger for 18350 18500 17500 3.7V battery and nimh nicd battery.
  • Pay attention:Because they shipped by amazon,so which one color up to the amazon..
  • Battery size:18*35mm charger size:110mm*105mm*39mm(L*W*H).
  • Charger compatible with:18500,10440,17500,AA,AAA,A,SC,C Battery(NIMH/NICD/3.7V Li-ion Battery).
  • 18350 Rechargeable Battery Appliations: LED Flashlight, headlamp, torch, headlight and so on.
Check Stock

Multi-Chemistry 18 Volt PCXMVC PCMVC Charger Compatible with Porter Cable 18V Battery PC18B PC18BL PC18BLX PC18BLEX PCC489N Lithium-Ion & NiCad NiMh

  • Brand New/Input:100-240V 50-60Hz/Output:3.0A for Li-ion/2.0A for Ni-Cd&Ni-Mh/Charges NiCd&NI-Mh battery in 45-minutes, Lithium battery in 30-minutes.
  • Replacement for Porter Cable PCXMVC PCMVC Charger.
  • Compatible with Porter Cable 18V NiCd NiMh & Lithium battery pc18b pc18bl pc18blx pcblex pcc489n.
  • Diagnostics with LED indicator communicates battery charge status. Optimizes battery life by controlling current, voltage & temperature.
  • All-around cooling system design, Internal cooling system circulates air across batteries to reduce hot/cold pack delays.
  • 30 days money back and 12 months quanlity service. Contact us: any question click the "Ask a question" on our storefront or in "YOUR ORDER" options click the "contact seller".
Check Stock