Top Nipple Fittings For Low pressure Systems

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

Malida Water Pressure Test Gauge Stainless for Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump with 1/4

  • Water Pressure test Gauge with fittings for connection to 1/4"OD tube.
  • Pressure test gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.
  • The Water Filter Men Pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4.
  • Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.
  • Glycerin filled water pressure test gauge universal to test water pressure gauge in multiple systems,Accuracy ASME B40.Grade B, Range to 0-220....
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

TL TOOLEGIN DOT Brass Push to Connect Fittings 1/4" Air Brake Union Air Line Fittings Push in Fittings Brass Union Air Brake Repair Kit Contains Tube Push-in Tee Union Coupling Male NPT 90° Elbow

  • Unique Air Line Tubing Kit: The air brake fittings contains 2pcs 1/4” Unions, 2pcs 1/4’’ Tees, 2pcs 1/4” DOT Push-In × 1/4” MNPT, 2pcs 1/4” DOT Push-In × 1/8” MNPT 90° Elbow, 2pcs 1/4” DOT Push-In × 1/4” MNPT 90° Elbow..
  • High-quality Material: Our push in fittings are made of high quality brass CA360 CA377 , with corrosion resistance, high temperature ductility and low permeability..
  • Technical Parameter: The Working Pressure is from Vacuum to 250 psi, the Working Temperature is from -40° F to +200° F..
  • Easy to install: All fittings can be sealed by pushing the tube firmly into the fittings, and they are also simple to be removed from the tube..
  • Wildly Usage: The air brake union assortment kit can be used with air systems, copper tubing in air brake systems, which is perfect for garages, workshops and so on..
Check Stock

Msd High Pressure Electric Fuel Pump, 43 Gph

  • Great for fuel management systems and nitrous booster.
Check Stock

MSD Ignition 29259 Fuel Pump

  • Great for fuel management systems and nitrous booster.
Check Stock

MSD Ignition 2921 Atomic EFI Fuel Pump Kit

  • Great for fuel management systems and nitrous booster.
Check Stock

Charlotte Pipe 3' Cap Bushing Pipe Fitting - Socket Schedule 40 White PVC Highly Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

  • PVC SCHEDULE 40: Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • CHARLOTTE PIPE PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

  • 【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
  • 【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
  • 【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..
Check Stock

AmazonCommercial Solvent Resistant Gasket Maker, 50 ml, Red

  • High-viscosity anaerobic adhesive for reinforcing close metal fittings.
  • helps prevent loosening due to vibration and stress.
  • Ideal for use with aluminum, steel, plated parts, stainless steel, and special alloy.
  • not recommended for thermoset plastics or in pure oxygen systems.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • ...esel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to release pressure safely and recovery fuel easily. Blow molding case keeps everything in place and protects the gauges during storage..
  • CHECK FUEL INJECTOR PUMP PRESSURE: The pressure tester is designed for checking fuel injection pump pressure and fu....
Check Stock