Top Nissan 14pin Adapter

ABN Caliper Piston Compressor Tool 16-pc Pneumatic Brake Caliper Tool Air Brake Tools Brake Caliper Compressor Tool

  • MAKE BRAKE JOBS EASY: Use the ABN Brake Compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4-inch air hose adapter to simplify brake jobs.
  • Choose an adapter, connect your existing shop air line, press pressure button and rotating lever to wind back brake piston, press release button, and pull rotating lever to move push piston axle backwards for dismounting tool caliper.
  • FITS YOUR VEHICLE: Drive key adapters for GM, Citroen XM & Zantia, Citroen CXM, Citroen C5, Alfa Romeo, Alfa Romeo 164 2.0 Saab 9000, Audi, Audi 80/90 & V8, BMW, Ford, Honda, Honda Prelude Isuzu, Jaguar, Jaguar XI40, Mercedes, Mitsubishi, Nissan, Nissan Bluebird, Nissan Silvia, Nissan Maxima Rover, Toyota, Toyota Celica & Corolla GR & MR2, Volkswagen (VW), VW Golf/Pas-Sat Corrado/GTX 16V/Scirroco, Volvo, Mazda 323.626, Primera 2.0L VW Golf IV, Rover 800, Subaru L & 2 Series, Opel, Ford Mondeo.
  • BUILT TO LAST: Pneumatic body constructed from solid heat-treated cast anodized aluminum.
  • Moving parts constructed from chrome alloy steel (chrome finished rotating lever, phosphate finished holder, and anodized aluminum handle).
  • Each adapter is permanently etched with size for quick i....
Check Stock

Humminbird 720108-1 14 M360 2DDI Y MEGA 360 & 2D/MDI Y Cable

  • Compatible with: MEGA 360, SOLIX 15 MSI G2, SOLIX 15 MDI G2, SOLIX 12 MSI G2, SOLIX 12 MDI G2, SOLIX 10 MSI G2, SOLIX 10 MDI G2.
  • Combines MEGA 360 Imaging transducer and 14-pin Dual Spectrum / MEGA Imaging+ transducers (including Built-in MEGA Imaging) into one 14-pin plug for connection to the same, compatible SOLIX fish finder, or HELIX fish finder with additional AD HELIX M360 adapter..
  • For use when connecting a MEGA 360 Imaging transducer to a compatible SOLIX or HELIX fish finder, in conjunction with a Built-in MEGA Imaging transducer or external 14-pin 2D /MDI transducer..
  • If this cable is being used with a HELIX fish finder, then the #720109-1 AD HELIX M360 adapter must be attached between this y-cable and the HELIX unit, to the single plug end of the Y cable..
Check Stock

2-Pack COMeap USB 3.0 20 Pin Male to Female L Turn 90 Degree Right Angle Power Adapter Board for Motherboard Down Angled

  • 『Solution』Providing a convenient solution for changing the installing direction of USB 3.0 20 pin/19 pin cables with the 90-degree L-Turn DOWN....
  • 『Connectors』There are two types about the adapter including DOWN and UP type. Please refer to the image 5th about how to choose the correct type.....
  • 『Compatibility』The adapter is standard USB 3.0 20 pin connector, so it will work with all of USB 3.0 20 pin/19 pin ports on the motherboard such....
  • 『Parameter』Dimension(L*W*H): 23*15*14mm(0.9*0.6*0.55in), Gauge: premium high-performance black PCB with EVA pad, Quantity: 2pcs, Self-adhesive....
  • 『Note』The adapter was only designed for USB 3.0 20 pin/19 pin port to improve the connection between your motherboard and USB 3.0 20 pin cable.....
Check Stock

Dryer Adapter, Dryer Plug Cord 14-30R Female to 10-30P Male, 3 Prong to 4 Prong Dryer Plug Converter with Ground Wire

  • ...e dryer, please consider using this plug. This plug is used to convert a 4-pin dryer plug (10-30P) to a 3-pin plug (14-30R). You do not need to replace the dryer, nor do you need to spend money to hire an electrician to modify the house wiring..
  • 【SAFETY】 The dryer plug adapter that meets the UL standard has a copper core that meets the quality requirements of STW 10/3 AWG and a durable insulating PVC protective layer. Before using the dryer, you must connect an additional green ground wire, connect the round terminal of the green wire to the ground hole of the 15AMP or 20AMP 125V wall socket/power socket..
  • 【PARAMETER】NEMA 10-30 3-prong plug 250V 30 AMP molded male, right angle. NEMA 14-30 4-prong socket 125V/250V 30 AMP molded connector, right angle. Please note that the dryer adapter will not change the voltage , It just converts 4-pin to 3-pin conversion plug..
  • 【EASY TO USE】 The power conversion adapter of the heavy-duty clothes dryer can be bent to fit your clothes dryer position. It does not require complicated installation. First, insert the 4-pin plug of the dryer into the female header.
Check Stock

AC Heater Blower Motor Resistor for Nissan Frontier Pathfinder Quest Armada Titan Xterra with Manual Temperature Control

  • Fits Nissan Armada 2005-2007 5.6L Sport Utility, Frontier 2005-2014 2.5L/4.0L Pickup.
  • Fits Nissan Pathfinder 2005-2012(4.0L) 2008-2012(5.6L), Xterra 2005-2011 4.0L---Sport Utility.
  • Fits Nissan Quest 2004-2009 3.5L Mini Passenger Van, Titan 2004-2012 5.6L Pickup.
Check Stock

TAN-LUXE The Gradual - Illuminating Gradual Tan Lotion, 250ml - Cruelty & Toxic Free

  • Heavy Duty AWG 14 Nema 5-15P to 5-20R Power Adapter Cable, USA 3Pin Male to Female AC Adapter.
  • [UL CUL Certified] AC Power Adapter Rated @ 15A 125V Cable in SJT 14AWG 3C for America market.
  • Convert your Nema 5-15P USA port to Nema 5-20R female port.
  • Cord in 14AWG heavy duty, cable wire in pure copper, 100% open/short/voltage tested.
  • The package you will receive include 1xPCS . 5-15P to 5-20R AC Adapter cable,.
Check Stock

Linkitom Magnetic LED Trailer Towing Light Kit, 24ft Cable with 7 pin plug, IP68 Waterproof, DOT Approved, for 5 Wire Vehicle

  • Some trucks, cars, and SUVs (like 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550)are 4-wire systems, this trailer light is not fit for them, because Red brake lights and flashing orange Direction Indicator lights control by the separate circuit.
  • Just the 2 yellow light will lighting (not red brake light lighting)when brake if use it to 4-wire systems car..
  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA 5 wire shstems standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in and go..
Check Stock

KFE KFE815-104 Ultra Quiet Advanced Premium Ceramic Brake Pad FRONT Set For: Nissan Altima, Sentra, Cube, Juke, Maxima, Versa, 350Z; Infiniti G20, G35, I30; Suzuki SX4

  • OEM Fitment and Warranty – Perfect fitment, no issues, and no hassle Limited Warranty.
  • Low Noise - Dual-Rubber Shims dramatically reduces vibration noise.
  • Less Break-In Time - Thermo Scorched manufacture process help reduce break-in time.
  • Increase Brake Bite, Long Life – Slots, and Chamfered edges features enhances brake bite, extends pad life and reduces noise. *Please check per your vehicle application.
  • not all applications have slotted/chamfered features.
  • Compatible With FRONT Brake Pad For: 02 Infiniti G20, 05 Infiniti G35 AWD, 03-04 Infiniti G35 Non-Brembo, 01 Infiniti I30, 02-04 Infiniti I35, 03-05 Nissan 350Z Non-Brembo Calipers, 13 Nissan Altima S Coupe, 02-12 Nissan Altima Exc SE-R 09-14 Nissan Cube, 11-17 Nissan Juke Exc Nismo RS, 01-03 Nissan Maxima, 07-19 Nissan Sentra Exc Spec-V, 09-12 Nissan Versa 1.8L Sedan, Hatch, 08 Nissan Versa Non-ABS, 07 Nissan Versa, 09-13 Suzuki SX4.
Check Stock

Metra 70-7552 Radio Wiring Harness For Nissan 2007-Up/Select Subaru 2008-Up

  • Allows for the installation of an aftermarket radio using the existing factory wiring and connectors.
  • Compatible with the 2007 Nissan Maxima and the 2007 Nissan Versa.
Check Stock

Metra Electronics 40-NI12 Antenna Cable to Aftermarket Radio Adapter for Select 2007-Up Infiniti/Nissan Vehicles,Black & Metra 70-7552 Radio Wiring Harness for Nissan 2007-Up/Select Subaru 2008-Up

  • Product 1: Antenna Cable to Aftermarket Radio Adapter.
  • Product 1: For select 2007-Up Infinity/Nissan vehicles.
  • Product 2: Plugs into car harness at radio.
  • Product 2: Allows for the installation of an aftermarket radio using the existing factory wiring and connectors.
Check Stock

FEELOTAM Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Board Tail Brake Stop Indicator License Plate Light Lamp for Trucks Trailers RVs SUVs

  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in and go..
Check Stock

Dryer Outlet Adapter, Dryer Plug Cord Nema 14-30P Male to 10-30R Female, 3 Prong to 4 Prong Dryer Plug Converter

  • When you move to a new house, and the socket of the new house is not suitable for your dryer, please consider this plug. This plug is used to convert the 4-pin dryer plug (14-30P) into a 3-pin socket (10-30R). You no longer have to spend money to hire an electrician to work..
  • The dryer plug adapter that meets the UL standard has 104 copper cores and a 600-volt durable insulating PVC protective layer.
  • the copper cores meet the quality requirements of STW 10/3 AWG, and the maximum support 30Amp and 7500 watts of overload..
  • The dryer outlet adapter 3 to 4 male plug NEMA 14-30p.
  • weight 1.4lb. Please note that the dryer adapter does not change the voltage, it is just a conversion plug that converts 4 prongs to 3 prongs..
  • The power conversion adapter of the heavy-duty clothes dryer can be bent to fit your clothes dryer position. It doesn't need to be installed, you only need to insert it in the position of the dryer..
Check Stock