Top Non brittle Wood like Filament

Inland PLA PRO (PLA+) 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Natural

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PLUS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA PLUS FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, a....
Check Stock

3Dman Filament Welder Connector Broken Filament Connector Sensor for 1.75mm Filament for Ender 3 V2 Ender 3 Pro Ender 3 Series Ender 5 Series CR10 Series Vyper Series and Other 3D Printers Red

  • Refuse filament waste: If the filament is disconnected during printing, or there is surplus material after printing, which is not enough to print a....
  • Print models in multiple colors: different colors of the same filament can be connected to print out a multi-level model..
  • Wide range of applications for most 1.75mm filaments: PLA/ABS/PETG/PC/PP/PVB/HIPS, etc. for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro,....
  • NOTE: The nylon displayed in pictures is just for reference ,NOT included in the package..
  • NOTE: Filament often lose water and become brittle when exposed to the air for a long time. In order to prevent the filament from becoming brittle,....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - White

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Olive Green

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Black

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

Filament Dryer Box,Upgrade FilaDryer S2 Dry Box,SUNLU Dry Box for 3D Printer Filament,Keep 3D Filament No More Brittle/String/Poor Adhesion,Large-Size Touch Screen,Real-time Humidity Display,Black

  • 【Dryer box keep filament dry, 360° even heating】SUNLU S2 filament dryer box, say goodbye to poor 3D printing by damp filament.Dust-free, moisture-free, 360° heating. SUNLU S2 filament dryer has two heat-sinks on top and bottom to provide even heating. Keep the 3D printer filament dry,no more brittle/string/poor adhesion,print smoothly..
  • 【Adjustable temperature up to 70℃, Adjustable time】Users can adjust the temperature of the dryer box according to different 3D filament types, ambient temperature, humidity and other factors. Adjustable temperature range is 35℃-70℃. Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. S2 dryer box can automatic sleep standby after drying..
  • 【Large LCD touch screen, easy to operate dryer box】S2 dryer box has a 3.42*2.87-inch LCD touch screen, touch reaction time less than 0.1 seconds. Dryer box with sensitive response, provide the tablet-like smooth experience. One-Click operation, provide suggested parameters for different 3D filament. Easy operation, make the filament keep drying during 3D printing..
  • 【Real-time humidity display, visualization of filament drying】S2 dryer box has a high-precision humidity detection sensor, displaying real-time humidity ins....
Check Stock

Upgraded SUNLU 3D Printer S8 Pro, FDM 3D Printer with Silent Motherboard, Large Printing Size 310x310x400mm, Resume Printing, Removable Magnetic Heated Bed, Pre-Assembled Printers, Open Source

  • ... and start printing. Disassembly is also simple, it’s convenient for users to upgrade and build their own printers(open source).Greater stability..
  • ④【Intelligent Clog Detection&Resume Printing】→ Suspend when clogging, resume after hadled. High-end detection module, real-time detection and identification of filament loading state, instantaneous response to suspend printing within 1 second after filament run-out..
  • ⑤【Equipped with with filament dryer box】→ SUNLU’s new version printer S9 Plus is compatible with many kinds of FDM printing filaments in the market, including PETG, ABS, TPU, Wood Fiber, Carbon Fiber, PLA filament, etc. Filament drying while printing , removal of moist and brittle filaments, achieving optimum print quality..
Check Stock

3D Printer Filament Dryer Box, SUNLU FilaDryer S2 for 3D Printing, 360° Surround Heating, Touch Screen, Real-time Humidity Display, Dryer Box for Nylon PA ABS PLA PETG Filament 1.75/2.85/3.00mm, Black

  • 【360°Embracing Heating, Rescue Poor Printing】 As an upgraded product, the S2 drying box adopts a double heating element structure, which heats up faster and evenly heat. The 3D filament dry box S2 has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying. Keep the 3D printer filament dry, no more brittle/string/poor adhesion,print smoothly..
  • 【Extended adjustable temperature range, Longer continuous drying time】 Compared with SUNLU dryer box S1, SUNLU FDM 3D Filament Dryer S2’s adjustable temperature range is 35℃-70℃. Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. S2 dryer box can automatic sleep standby after drying..
  • 【One-click personalization, Remember Your Operation】 New 3.42*2.87inch touch screen, tablet-like operation experience. One-key switching between ℃ and ℉. According to various filament, user-friendly one-key recommended temperature setting. The settings before the shutdown will be remembered until you change settings again..
  • 【Real-time humidity detection, Visualization of dry conditions】 Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. The change of the LED lamp ring....
Check Stock

SUNLU PLA Meta 3D Printer Filament, High Toughness PLA Meta Filament 1.75mm , No Clogging, Highly Fluid, Fast Printing for 3D Printer,Dimensional Accuracy +/- 0.02 mm,1 KG Spool,Blue

  • ①【High Speed Printing & No Clogging】Smooth Squeeze.SUNLU 1.75mm PLA Meta 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each spool.Minimum tolerance and low warping to ensure consistent feeding and fast prints,say goodbye to clogging.The perfect dimensional accuracy +/-0.02mm provide optimum flow through the extruder nozzle.PLA Meta is 1.5 times more fluid than regular PLA..
  • ②【Avoid Knotting & No Odour】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.PLA Meta is a biological material, purified from corn grain, eco-friendly, odourless and harmless to humans..
  • ③【Impact Resistance & Energy Efficiency】High toughness and non-brittle PLA Meta printed parts can be sanded, drilled and painted.The PLA Meta filament is very tough and not easily brittle, the model does not break easily when dropped from a height to the ground.PLA Meta printing temperature: 180-200℃,low printing temperature printing for greater energy efficiency..
  • ④【Glossy Surface & Good Adhesion】Brightly coloured PLA Meta filaments bring glossy surface prints to....
Check Stock

Snapmaker Wood Filament 3D Printer Filament 1.75mm, 750g Spool (1.65 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer Wood PLA

  • Dimensional Accuracy and Consistency: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker wood filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
  • Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker Wood PLA filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
  • Wood-like, Perform Better and Less Weight: Snapmaker Wood PLA Filament is PLA-based and uses a special foaming technology, which gives it a stable foam structure to mimic actual wood. It enables you to print whatever you want with wood color and texture, and outperforms traditional wood composite in terms of printing quality.
  • Wood-like density makes the filament lighter than traditional PLA filaments and fits a wide range of applications..
  • Wide Compatibility: Snapmaker Wood filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge,....
Check Stock

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

  • [Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
  • [Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
  • [ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
  • [Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
  • [Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Check Stock

Microplane Master Series Wood Handle Stainless Steel Zester Grater

  • BEST FOR - Lemon, Lime, Citrus, Ginger, Garlic, Whole Cinnamon, Whole Nutmeg, Hard Cheese like Asiago or Parmesan. Adds flavor, without any texture.
  • ULTRA SHARP BLADES - Made in USA! Blades are made of US Stainless Steel, at our facility in Russellville Arkansas.
  • The Wood handle is sourced from Kentucky. *Support American jobs and manufacturing by purchasing this product..
  • NON-SLIP -The base of the frame has a non-slip foot to keep the grater from slipping while you cook and preventing any scratching on your countertops..
  • HAND WASH - The nature of a wood handle, just like a steak knife, dries out in water, it is best to wash immediately, and oil as necessary to keep the wood from becoming dry and brittle. *DO NOT SOAK*.
  • PROTECTIVE COVER - Microplane blades are ultra sharp, so keep your fingers safe by placing the cover over the top of the blade before storing..
Check Stock