Top Non contact Current Measurement

KAIWEETS HT206B Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC Clamp Meter)

  • True-RMS clamp meter: This voltage meter can accurately measure AC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household..
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Defection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36-Month produc....
Check Stock

Neoteck Auto Ranging Digital Multimeter + Non-Contact Voltage Tester

  • 【Neoteck 2000 Counts 8233D PRO Pocket Digital Multimeter】 2000μF Capacitance and 200KHz Frequency Measurement, Accurately Measures Current, Voltage, Resistance, and More, Maximum Reading over Time, Auto-ranging and Continuity Buzzer.
  • 【Large Backlit LCD Display】 Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas.
  • 【Nice Protective Orange Shell with Stand Built】 The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free.
  • 【Non-Contact Voltage Tester with Wide Testing Range】 This Non-Contact Voltage Tester Voltage within 12-1000V AC, All Electric Appliances in Your Family can be Tested by it.
  • 【Safe and Convenient】 The Voltage Pen Tester Detectes Voltage in a Non-Contact Way, So Do Not Worry about There Could be any Possibility of being Shocked by the Electricity.
Check Stock

KAIWEETS HT206D Digital Clamp Meter T-RMS 6000 Counts Multimeter Voltage Tester Auto-ranging Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle AC/DC Current

  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household..
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Mo....
Check Stock

Digital Multimeter RQ-770S,TRMS 6000 Counts Auto-Ranging Voltmeter Fast Accurately Measures Voltage Current Resistance Diodes Continuity Duty-Cycle Capacitance Temperature hFE with NCV Function

  • ...of which value range to use. Adopt 6000-digit LCD display, character height 25mm, clear reading.
  • Safety first – Complies with IEC-1010 overvoltage category CAT III 1000V and pollution 2 for electronic measuring instruments, and is equipped with 800mA/250V fast fuse for protection of temperature testing and current measurement circuits up to 600mA, with 20A /250V fuse for protection of 20A range, silicone sleeve to prevent drop damage..
  • What You Will Get：1* RQ-770S Digital Multimeter, 1* 9V Battery, 1* Manual, 2* Test leads(Black&Red ), 1* Thermometer Probe (Black&Red ), 1* Screwdriver, 1* 9103 Test leads.We provide 2 years warranty and lifetime technical support.If you have any problem after receiving the product，please feel free to contact us..
Check Stock

Blue Sea Systems MULTIMETER W/CLAMP ACDC 600V400A

  • Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting live terminals.
  • Auto range simplifies operation: 0.01-400 Amps, 0.001-600 Volts.
  • Nickel-plated brass and phenolic non-corrosive construction.
Check Stock

Fluke I310S AC/DC Current Probe +/-100mA Resolution 300V AC/ DC Voltage 450A DC 300A AC rms Current

  • Current probe is based on hall effect technology.
  • Use in measurement of both DC and AC current.
  • It may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
  • Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A).
  • Load impedance: greater than 10 k ohms and less than or equal to 100 pF.
Check Stock

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

  • ⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
  • ⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
  • ⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
  • ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1....
Check Stock

Klein Tools CL380 Electrical Tester, Digital Clamp Meter and Non-Contact Voltage Tester, Auto-Ranging and TRMS, 400 Amps, LCD Display

  • Electrical Tester measures both AC/DC current via the clamp.
  • Non-contact voltage tester integrated into the clamp jaw.
  • High-visibility reverse contrast LCD display for improved viewability in all ambient lighting conditions.
  • Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.
  • Measures AC/DC voltage, DC micro-Amp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads.
Check Stock

AIOMEST Digital Clamp Meter 6000 Counts, TRMS Multimeter with Auto Ranging, Amp Meter Measures Inrush AC&DC Current, AC&DC Voltage, Resistance, Capacitance, Diodes and Temperature

  • ✨【6000 COUNTS CLAMP METER】: AN-6205 clamp meter is professionally designed for electricity circuit properties measurement. Test a wide range of measurements including AC/DC Voltage 0.01mV~600V, AC/DC Current 0.01A~600A, Resistance 0.1Ω~60MΩ, Continuity and Diode Test..
  • ✨【AUTO POWER OFF SAFELY】: When measurement exceeds 15 minutes without switching mode and pressing key, the meter will switch to standby mode. Press any key to exit standby mode. The auto power off mode can provide the voltmeter with a longer service life while also better protecting the battery..
  • ✨【STRONG OPERABILITY】: Built with 1.34 inches large double open jaw and pick up AC/DC Current flowing through the conductor, increasing safety while improving this meter’s capabilities. Over-load protection circuit can effectively help you to carry out measurement work within the measurement range. Auto ranging and auto LCD backlight make your measurement more convenience..
  • ✨【CONVENIENT FEATURES】: The avometer included relative value, MAX/ MIN, data hold, inrush current test and audible continuity test, ideal for electrical troubleshooting problems, circuit properties measurement, automotive repair and maintenance, lab, industrial and household applications..
Check Stock

Kyoritsu 2300R True RMS AC/DC Fork Current Tester, 100Amp, 10mm Conductor

  • True RMS reading is an essential feature for accurate measurement.
  • Non contact voltage function indicates the presence of AC voltage by warning the user with an audible signal.
  • Set the DC current range to zero in one touch with the zero adjust function.
  • Designed to international safety standard IEC61010-1 CAT.3 300V.
Check Stock

Normally Open Current Switch Adjustable Isolation The AC Current Monitoring Current Detection Protection AC 0.2-30A SZC23-NO-AL-CH

  • Easy To Use: Current sensing switch is self-powered, requires no external power supply, operates at 0.2-30A AC, and can be adjusted with a potentiometer..
  • Convenient And Intuitive: The switch does not limit the number of opening and closing, the reaction speed reaches ms level, and the LED indicator can indicate the working state of the switch..
  • Accurate And Timely: Current switch is a straight-through structure design with isolation withstand voltages up to 2000V and hysteresis of less than 1%. It can be used under strong magnetic conditions..
  • High Quality: High-power MOS tube non-contact electronic switch, the outer casing is made of self-extinguishing material ABS..
  • Widely Used: it is suitable for AC current measurement and monitoring, AC motor overload protection, automatic control system electronic switch..
Check Stock

Amprobe TACH-10 Tachometer with Contact and Non-Contact Measurement

  • Combination contact and non-contact measurements for measuring rotational speed of motors, conveyor belts, and other moving and rotational systems.
  • Contact measurements in RPM, m/min, ft./min, or yd./min and non-contact measurement in RPM for flexibility of use.
  • LCD display measures 15 x 33mm (0.6 x 1.3 inches) for readability.
  • Non-contact measurements using infrared beam function at a distance of 5 to 30cm (2 to 13 inches).
  • User selectable units for contact measurement: RPM, m/min,-Feet/min, yd/min.
Check Stock