Top Non ferrous Materials

2 inch X 50 YD Sanding Shop Roll 320 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

Tacklife Smart

  • Accurate and Quick Stud Finder - The ENGiNDOT stud finder can detect 4 materials include wood, ferrous metals, non-ferrous metals, and AC wires. This....
  • Wire Warning & Metal Detection up to 100MM - Electrical wire detection is up to 2 in.(50mm) depth. No matter what detection mode it is in, AC live....
  • Automatic Calibration & 3 Signal Lights- Saving your effort the stud scanner calibrates automatically without pressing the button manually all the....
  • Works on Wallpaper & Fabric too - The stud finder is not just suitable for drywall. It also scans through the surfaces covered in wallpaper, popcorn....
  • Durable Material and Ergonomic Design - Featured soft rubber buttons to provide a comfortable using experience. This stud finder wall scanner comes....
Check Stock

AUTOKAY New HSS 5/8\-24 UNEF Right Hand Thread Tap and Die Set (5/8x24) RH

  • Thread diameter (D): 5/8'' or 0.625inch or 15.875mm.
  • Application: Cutting Tools & Consumables, arbon steel,alloy steel and cast iron hole processing etc.
  • High speed steel (HSS) provides good wear-resistance.
  • Can be used in general purpose applications for both ferrous and non-ferrous materials.
  • Package:1x 5/8" - 24 TAP,1x 5/8" - 24 DIE.
Check Stock

FXIXI HSS Gear Milling Cutter,Module 2 Diameter 22mm 20degree #1-8 HSS Involute Gear Milling Cutter (#7)

  • Specialty cutting tools designed for milling gears..
  • Sized and proportioned to afford a good cutting range and ample rigidity..
  • Straight form tooth design to suit the involute gear form..
  • Well suited for use in a variety of ferrous and non-ferrous materials..
Check Stock

Metal Detector X10 Pro with 9*5\ Coil Waterproof Light Weight Easy to Use Loud Speaker Built-in Rechargeable Battery Perfect for Beginners

  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the 3 different types it will emit the 3 different sounds: a low tone alarm sound for ferrous metals, a medium tone alarm sound for low conductivity non-ferrous metals, and a high-tone alarm sound for high conductivity non-ferrous metals..
  • FANTASTIC DISC BUTTON: By pressing the DISC button of MMD02, you can easily detect certain types of metals: once for ferrous metals, twice to exclude even low conductivity non-ferrous metals, three times to return to normal detection. MMD02 helps to find metal faster, also thanks to the deep detection function. Depending on the depth, different icons will appear on the MMD02 display..
  • FUN FOR EVERYONE: The detection rod of MMD02 can be freely adjusted in length from 61cm to 90cm. Not only is it usable by adults, but it also provides the joy of treasure hunting for kids. The non-slip strip equipped with MMD02 makes it more convenient to carry. The waterproof coil also offers another detection possibility, namely shallow water detection. ? Notice: The detection rod and coil are waterproof, but the detector is not..
  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the ....
Check Stock

Red Label Abrasives 1 1/2 inch X 50 YD Sanding Shop Roll, 100 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

Red Label Abrasives 1 1/2 inch X 50 YD Sanding Shop Roll, 150 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

BOSCH T118G 5-Piece 3-5/8 In 36 TPI Basic for Metal T-Shank Jig Saw Blades

  • For sheet metal 17-26 gauge, very thin metals 1/64 In. to 3/64 In. thick (ferrous and non-ferrous).
  • 36 TPI tooth design for smooth cuts in very thin materials.
  • High-speed steel construction for maximum life in straight cuts.
  • 3-5/8 In. overall length, 2-5/8 In. working length.
  • Proper lubricant is recommended when cutting metal.
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

Rocaris 1\ Brown 120 Grit Abrasive Buffing Polishing Wheels Burr For Rotary Tools-1/8\(3mm) Shank 50 Pack

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel ,120Grit.
  • 【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 120 grits,total 50pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

WORKPRO 276-piece Rotary Tool Accessories Kit Universal Fitment for Easy Cutting, Carving and Polishing

  • This kit includes complete rotary tool accessories of cutting, grinding, sanding, sharpening, polishing, engraving, drilling, cleaning, meet your various DIY application requirements.
  • All purpose accessory for cutting, grinding, sanding, carving and polishing on variety of materials.
  • Suitable for most ferrous and non-ferrous metals, castings, welded joint. Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless.
  • Shank Diameter: 1/8-inch, universal fitment for use on all major brands.
  • Reusable storage case for easy storage and carrying.
Check Stock

25 x TopsTools T118A Metal Cutting Jigsaw Blades Compatible with Bosch Dewalt Makita Milwaukee and many more

  • 25 piece TopsTools universal Jigsaw saw blade accessory kit.
  • TopsTools T118A Jigsaw blades are designed and engineered using the highest quality materials and processes.
  • T-shank design for maximum grip and stability which fits 90% of all current jigsaw makes and models.
  • Ideal for sheet metal 10-16 gauge, thin metals 1/25 In. to 1/8 In. thick (ferrous and non-ferrous).
Check Stock