Top Non ferrous metal

Security Airport Walk Through Metal Detector New

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • LED alarm light on column, displaying the area of metal detected accurately..
  • Six interlaced detection regions of the same high with the body and combining.
Check Stock

Commercial Walk Through Security Metal Detector 6 Zone New

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • . LED alarm light on column, displaying the area of metal detected accurately..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Imachinist S5612131418 56-1/2\ Long, 1/2\ Wide, 0.025\ Thick M42 Bi-Metal Bandsaw Blades for Soft Ferrous Metal Cutting Variable Teeth (14/18TPI)

  • Bi-metal type, HSS M42 grade, 56-1/2" long, 1/2" wide, 0.025" thick, 14/18 TPI.
  • 14/18 TPI is variable teeth profile, suitable for thin ferrous metal tube profile etc, do not cut any non-ferrous metal like aluminum etc..
  • 8% cobalt with 2% tungsten content to increase durability abrasive resistance.
  • Suits all bandsaws which use 56-1/2" long, 1/2" wide band saw blade.
Check Stock

Makita B-65399 Impact Gold 14 Pc Titanium Drill Bit Set 1/4 In Hex Shank

  • Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits.
  • 135 degree split point geometry for faster starts and reduced walking.
  • Impact rated: For use in 1/4 inches Hex impact drivers.
  • For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Check Stock

Harrier 9ft Crank & Tilt Patio Umbrella | Adjustable Backyard Outdoor Sun Shade Umbrella – 4 Colors | Solar LED Light & Standard Options LED Umbrella + 23L Plastic Base Grey

  • Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
  • Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
  • Shows the depth of metal from the surface in both inches and centimeters.
  • Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
  • Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and....
Check Stock

Jigsaw Blades U-Shank 70pcs Set, 6-32 TPI Jig Saw Blades for Wood, Plastic and Metal Cutting, Fit Most U Shank Jigsaws, Bosch, Dewalt, Black Decker, Craftsman

  • 【70PCS Super Set】70pcs U shank jig saw blades set includes: Metal cutting: 10pcs x 14TPI medium cut.
  • Non ferrous metals: 10pcs x 18TPI medium cut.
  • Non ferrous metals: 10pcs x 24TPI fine cut.
  • Non ferrous metals: 10pcs x 32TPI extra fine cut.
  • Wood and plastic cutting: 10pcs x 6TPI fast cut.
  • 【U Shank】More Power. Three contact points are designed on the U-Shank of the saw blade for maximum grip and stability. Make woodworking faster and safer.
  • 【Compatibility】Compatible with over 90% current jigsaws including Bosch , DEWALT , BLACK+DECKER , CRAFTSMAN , SKIL , and Milwaukee U Shank jig saws, the u-shank jigsaw blades metal cutting are a versatile addition to any toolset.
  • 【High Quality】Made of high carbon steel material. HCS blades are suitable for cutting wood, plastic and metal. 70 Piece contractor jigsaw blades set. Meet your everyday needs.
  • 【Wide Application】Blades for Clean and precise straight/curved cutting, idea for hardwood, softwood, laminated boards, fiber boards, and plastic. This jig sawsjig saw blades set....
Check Stock

BOSCH BS62-18MD 62 x 3/8 x 18T Metal Bandsaw Blade

  • Designed for use in many standard stationary band saws..
  • Optimized tooth geometry for applications in ferrous and non-ferrous metals..
  • Bi-Metal blade construction for long life performance..
  • Precision sharpened teeth for clean, accurate cuts..
Check Stock

Rockwell RW8930.3 1-1/8-Inch Sonicrafter Oscillating Multitool Bi-metal and Wood End Cut Saw Blade with Universal Fit System, 3-Pack

  • Use to make plunge cuts up to 1-5/8-Inch deep.
  • Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
Check Stock

SHDIATOOL Metal Cutting Diamond Blades Set of 2 Pieces

  • 1PC Metal Cutting Diamond Disc plus 1PC All Purpose Metal Cutting Blade.
  • Metal Cutting Diamond Discs are specially designed for cutting steel tube, iron rebar (Less than dia 25mm), angle steel.
  • All Purpose Metal Cutting Blade has Wide Application - Granite, Marble, Aluminum, Steel, Wood....
  • No risk of break of disc,so much safer than abrasive cut-off wheel.
  • Blades are made with high hardness diamond, could be used for cutting all ferrous and non-ferrous metals, with a Lower Cost per Cut.
Check Stock

6 Zone Walk Through Metal Detector by Titan Security New Warranty

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • . LED alarm light on column, displaying the area of metal detected accurately..
Check Stock