Top Non marking Hose

Plews / Edelmann Amflo 24-25E-RET Polyurethane Recoil Air Hose - Lightweight, Non-Marring, Extreme Cold Flexible, Self-Storing, Ideal for Home, Shop, or Industry, 1/4\ X 25' Blue

  • SELF-STORING RECOIL HOSE: Retains its self-coiling properties.
  • No wasting time coiling hose for storage.
  • NO MARKS, NO MESS: Smooth, non-marring finish.
  • Ideal for indoor finishing work, won’t cause damage to painted surfaces, wood flooring, trim, and laminates.
  • COLD WEATHER FLEXIBILITY: Polyurethane hose is perfect for year round use in temperatures as low as -30 degrees F.
  • BUILT TOUGH: Oil and chemical resistance.
  • Reinforced braided nylon make this hose a great choice for harsh environments like automotive repair shops and industrial facilities.
  • WON’T TWIST OR CRIMP: 1/4 inch NPT swivel fittings to reduce twisting, rugged PVC bend restrictors prevent damage to hose ends, 120 PSI working/480 PSI burst pressure, -30 to +150 temperature range.
Check Stock

Hand Dredge (Assembled)

  • ...itself is 36 inches long before you even attach a nozzle!.
  • This portable piece of gold mining equipment is ideal for working below the water line. This hand dredge is non-motorized and is ideal for areas where power equipment is prohibited. The check valves have white marks on the “top” side. For the system to work most effectively, these marks should be pointed upwards. The flappers in the pumps hang on hinges which work best when the hinges are at the apex of the flow..
  • Included with this hand dredge pump: 6 foot hose, 2 gallon bucket and twist off Gamma Lid (bucket is 9" tall x 8" diameter).
  • 3 specialty nozzles with extension, instructions. Hand dredge ships via UPS to street addresses in continental USA only. Sorry, no PO Box shipping addresses..
  • The pump uses two leather cups back-to-back, attached to the plunger handle, to move material into the pump and out through the hose. When wet, these cups will seat in the barrel of the pump. When first using your pump, placing the leather cups in water for a few minutes will allow them to conform to the diameter of the pump barrel and work more effectively. ....
Check Stock

PWACCS Pressure Washer Hose for Power Washer – 3600 PSI High Pressure Replacement Hose – 1/4" x 25 FT Flexible Power Washing Extension Hose – Compatible with M22 Fittings

  • ... Only have to carry it by either of your hand, because the pressure hose just weighs under 3 lbs. Perfect for those outdoor working issues!.
  • LIFELONG QUALITY — Kinking, wearing, cracking or soiling won’t ruin your working experience with our power washing hose! The non-marking material keeps dirty hard to stay during those messy work environment, with exquisite weaving process to withstand greater pressure..
  • BROAD APPLICATION — Bring the hose, whether as a gift to chummy or a reward to your own. A loyal power hose is never picky about its working environment, no matter car washing, house cleaning or plant watering. Even it suffers from tearing of your pet, rubbing of the rock and trampling of pedestrians, silence is the best feedback..
  • PREMIUM SERVICE — PWACCS regards customer satisfaction as our highest pursuit. We provide 24 hours customer service team to solve in or after sales problems like adaption, return, refund or replace issues. Welcome for your request for any time..
Check Stock

DELTA FAUCET RP31612 Replacement Hose/Spray, Chrome

  • MULTI-USE PORTABLE HANDHELD SINK SPRAYER: With 2 easy steps, you can make an extension of your existing faucet with our Easy Spray Handheld Sink Sprayer. Create ease for yourself when it comes to washing your hair, bathing your baby, washing your dog and washing your vegetables. You can even use it for hand washing clothes or other items in your kitchen sink. This is a great alternative to use for your kitchen sink and BEST FITS traditional non-pull down faucet fixtures..
  • STEP 1: Remove your old aerator from the faucet spout and install the new aerator (included in packaging) in its place to attach sprayer. The included aerator fits a 15/16" outside thread and 55/64" inside thread (27 NPT).
  • STEP 2: Align tabs on quick-connector adapter with markings as guides to gently push adapter up into aerator and turn to lock hose in place with a ¼ turn to the right.
  • QUICK AND EASY STORAGE WITH REMOVABLE HOSE: To remove hose, turn water off at faucet source, gently push up on hose and turn clockwise a 1/4 turn to the left to release from aerator..
  • EASY TO USE WITH ON/OFF TOGGLE SWITCH: The handheld portable sprayer has a convenient on/off toggle switch that allows you to control the water flow from light to full, depending on your needs..
Check Stock

M MINGLE Pressure Washer Hose 50 Feet X 1/4 Inch for Most Brands, Compatible M22 14mm and M22 15mm, 3600 PSI

  • High pressure hose is 50 FT X 1/4 Inch, fits most brand power washer, such as Karcher, Troy Bilt, Ryobi, Honda, Simpson, Generac, Flexzilla, Craftsman, Green Work, Briggs and Stratton, Sun Joe, Dewalt and more..
  • Max working pressure is 3600 PSI. Max temperature is 140℉ / 60℃. Pressure washer hoses have M22 female thread. Compatible M22 14mm and M22 15mm fitting. The brass coupler attached can change female M22 fitting to male M22 fitting..
  • Power washer hose uses premium quality material, durable, weather and abrasion resistant. Easy to carry, drag and roll up. Non marking and Never kink permanently. Bend radius of the hose is 4.33 inch..
  • Pressure washer extension hose in your home and commercial usage, safe to wash Car, Motorcycle, Floors, Windows, Driveways, Roofs, Pool, Siding and so on..
  • AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

PWACCS Pressure Washer Hose for Power Washer – 3600 PSI Kink Resistant Pressure Washing Extension Hose 50 FT x 1/4\ – Universal Electric Power Wash Hose for Replacement – Compatible with M22 Fittings

  • ...FITTING — PWACCS power wash hose is suitable with most brands’ and models’ pressure washer accessories, for adopting standard M22 fitting craftmanship. A good choice as a replacement or extension part for your genuine hose..
  • SUPERIOR PERFORMANCE — Polyurethane outer jacket ensures pressure wash hose non-marking. Stains can be removed at ease and scratches cannot stay. At the same time, it is naturally resistant of dirt, corrosion, kink, wear or weather..
  • LIGHT WEIGHT — The apple-green hose for pressure washer is made of lightweight polyester braid, compared with traditional rubber-made hose, it is at least 50% lighter, make it more convenient to carry when outer-working..
  • LONG SERVICE LIFE — All benefits from high strength hybrid polymer material inside, this pressure washing hose will not easily blowout or leak even after hundreds of times work in daily life if only used under rated pressure (lower than 3600 PSI).
  • Protective case at both end can protect pressure hose from bending and guarantee a longer use time..
  • FULLY EQUIPPED — The package contains a 50 ft power washer hose and 5 adapters to deal with most cases. The coupler (M22 14mm Male to M22 14mm Male) is used for connecting two hoses. Other two adapter set (M22 14mm Female to ....
Check Stock

Oneida Air Systems - Mini-Gorilla Cyclonic Dust Collector (220V)

  • 220 V Delivers up to 600 Actual CFM through 5” inlet – ample airflow for any woodworking tool with a 4”-6” port, including planers, jointers, lathes, drum sanders, etc. Includes an Inlet Adapter Kit for connections with 4″ hose..
  • Powerful, portable, and awarded “Best Tool” by Fine Woodworking Magazine, the Mini-Gorilla Cyclone Dust Collector is the tool of choice for small shops looking for a mobile solution that never compromises on air performance or filtration..
  • Lightweight and portable design with small footprint, lockable non-marking wheels, and 22-gallon mobile dust bin with liner bag holder and fill level viewing window. Ideal for smaller workshops with limited space. Low pitch (80.5 dBA at 10 ft) noise level for operator comfort..
  • HEPA-Grade Filter Media with high-efficiency (>99%) cyclonic pre-separation that significantly reduces the need for filter cleaning and maintenance. Filter features non-stick membrane and vacuum hose port for easy cleaning..
  • Patented and made in the USA with industrial grade 1.5 HP US-made fan blower motor that’s built to last a lifetime. US Pat. 7824457, D604464, 8491686, 8377160, 8496719, 7937803.
Check Stock

Set of 6 Grill Mat, 2 Pieces Grill Mats with Holes, 4 Pieces Regular BBQ Grill Mats, Non Stick, Heavy Duty Grill Mats for Outdoor Grill, 15.75 x 13 Inch

  • ...FE fiberglass. The hole design is suitable for making food with a smoky flavor. The grill mat has a maximum heat resistance of 500 ℉. If you used for a long time, the maximum temperature cannot exceed 400 ℉..
  • Easy to use & clean: Our grill mats have the perfect thickness to quickly cook your food and leave grill marks. The holes design prevents water and grease from building up. The grill mat has a non-stick coating that makes it easy to clean. Can be rinsed under the hose and is also dishwasher safe..
  • Easy to use & clean: Our grill mats have the perfect thickness to quickly cook your food and leave grill marks. The holes design prevents water and grease from building up. The grill mat has a non-stick coating that makes it easy to clean. Can be rinsed under the hose..
  • Practical gift: 6 pieces of reusable grill mats make it easier for you to cook meat and vegetables. The high quality material makes the food evenly heated. Good idea for Father's Day, Mother's Day as a gift..
Check Stock

Oneida Air Systems 1.5 HP / 110V Mini-Gorilla® Portable HEPA-GFM Cyclone Dust Collector with U.S Motor Premium Filter Liner Bag Holder Bin View Window

  • Delivers up to 600 Actual CFM through 5” inlet - ample airflow for any woodworking tool with a 4”-6” port, including planers, jointers, lathes, drum sanders, etc. Designed for direct connection to tools with flex hose. Note: Requires 20A, 5-20P outlet. Includes 5” to 4” reducer for connecting to 4” hose..
  • Powerful, portable, and awarded "Best Tool" by Fine Woodworking Magazine, the Mini-Gorilla Cyclone Dust Collector is the tool of choice for small shops looking for a mobile solution that never compromises on air performance or filtration..
  • Lightweight and portable design with small footprint, lockable non-marking wheels, and 22-gallon mobile dust bin with liner bag holder and fill level viewing window. Ideal for smaller workshops with limited space. Low pitch (80.5 dBA at 10 ft) noise level for operator comfort..
  • HEPA-GFM (Grade Filter Media) with high-efficiency (>99%) cyclonic pre-separation that significantly reduces the need for filter cleaning and maintenance. Filter features non-stick membrane and vacuum hose port for easy cleaning..
  • Patented and made in the USA with industrial grade 1.5 HP US-made fan blower motor that’s built to last a lifetime. US Pat. 7824457, D604464, 8491686, 8377160, 8496719, 7937803.
Check Stock

M MINGLE Pressure Washer Hose 50 Feet X 1/4 Inch for Most Brands, with 2 Quick Connect Kits, Compatible M22 14mm, 3600 PSI

  • Including a pressure washer hose 50 feet, a coupler (male M22 14mm) and two adapter sets (female M22 + 3/8” plug, 3/8” quick disconnect + male M22 14mm)..
  • High pressure hose fits most brand power washer, such as Karcher, Troy Bilt, Ryobi, Honda, Simpson, Generac, Flexzilla, Craftsman, Green Work, Briggs and Stratton, Dewalt and more. ATTENTION: NOT FIT M22 15mm fitting. NOT FIT sunjoe PRESSSURE WASHER..
  • Max working pressure is 3600 PSI. Max temperature is 140℉ / 60℃. Power washer hoses uses premium quality material, durable, weather and abrasion resistant. Easy to carry, drag and roll up. Non marking and Never kink permanently..
  • Pressure washer extension hose in your home and commercial usage, safe to wash Car, Motorcycle, Floors, Windows, Driveways, Roofs, Pool, Siding and so on..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Gill Short Cruising Sailing Yachting Non-Slip Rubber Boot

  • Our Short Cruising Boots are the perfect solution for keeping a steady grip on slippery surfaces. A 100% natural rubber compound boot they are quick drying with a polyester lining and removeable cushioned insoles. .
  • Their reinforced heel instep and toe combined with the non-slip non-marking razor cut outsole ensure a safe grip. Suitable for conditions all year round.
  • Remove salt and grit by washing under a tap or hose with fresh water. The outside of the boots can be cleaned with a warm non-detergent soap solution and rinsed thoroughly. Use a stiff brush to remove stubborn residue. You can also clean the inside of the boot with fresh water and a non-detergent soap. Wipe well to remove excess water inside and out. Allow to dry naturally away from a direct heat source. To improve the drying time place screwed up newspaper inside the boots. For best results dr.
Check Stock

Gill Tall Cruising Sailing Yachting Non-Slip Rubber Boot

  • Our Tall Yachting Boots are the perfect solution for keeping a steady grip on slippery surfaces. A 100% natural rubber compound boot they are quick drying with a polyester lining and removeable cushioned insoles. .
  • Their reinforced heel instep and toe combined with the non-slip non-marking razor cut outsole ensure a safe grip while the padded tie top adds that extra level of security. Our Yachting Boots are suitable for conditions all year round.
  • Remove salt and grit by washing under a tap or hose with fresh water. The outside of the boots can be cleaned with a warm non-detergent soap solution and rinsed thoroughly. Use a stiff brush to remove stubborn residue. You can also clean the inside of the boot with fresh water and a non-detergent soap. Wipe well to remove excess water inside and out. Allow to dry naturally away from a direct heat source. To improve the drying time place screwed up newspaper inside the boots. For best results dr.
Check Stock