Top Non metallic Conduits

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia

  • Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 3/4-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 3/4\ Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Morris Products 60272 Tape Roll, 2” X 100ft X 20 Mil, Black

  • HEAVY GAUGE VINYL PIPE WRAP TAPE: Find a durable solution to protect against corrosion in electrical and mechanical piping systems with this self-fusing and self-amalgamating Morris Products Black Pipe Wrap Tape available in 10 mil and 20 mil..
  • PRESSURE SENSITIVE PIPE WRAP TAPE: Offer electrical and mechanical protection for all types of valves, joints, pipes and conduit with this pressure-sensitive pipe wrap tape that is UV..
  • VERSATILE APPLICATIONS: You need durable products when working with indoor and outdoor overhead and direct burial applications and that’s what you get with this lead-free, UPC approved black pipe wrap tape..
  • ULTIMATE STRENGTH: This black pipe wrap vinyl tape offers excellent protection against corrosive salts and sewage, sunlight water and acids for ultimate protection of conduits, joints, valves and pipes..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Sealproof 1-Inch Non-metallic Liquid-Tight Conduit and Connector Kit, 25 Foot Made in USA Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1" Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

OhLectric Pipe Support Strap - Steel Pipe Strap with 2 holes - Heavy-Duty 1 inch U Bracket - Zinc Coated Tension Tube Clip - Pipe Clamp for EMT Conduits - OL-72860 - 25 PCS

  • ...inent middle part that holds the heavy load pipes tightly and prevents them from twisting. This strong rib structure makes the clamp suitable for all indoor and outdoor piping needs!.
  • RIGHT SIZE: Made to fit for all 1-inch pipes, this wide pipe strap is the perfect clamp to hold all types of pipes like PVCs, and EMT conduits, Wire Pipes, Hoses, Electric Lines, or Cables for a panel and frame application. The polished silver-tone color gives the attractive look, making it suitable for humid environments!.
  • EASY INSTALLATION: Thanks to the high-quality steel material, OhLectric’s metal pipe strap can last for years, making it an essential item in your plumbing kit. The two-hole design allows plumber or any other installer to secure pipes on all surfaces with ease!.
Check Stock

Gampak Conduit Hanger Emt 1/2 \ Csa Bag

  • Used to secure & suspend EMT, rigid, IMC & PVC conduits from overhead supports.
Check Stock

Sakrete | Hydraulic Cement Leak Stopper - Gray | 10 lb

  • Can be used in basements, elevator pits, conduits, sea walls, swimming pools, tunnels, storm drains, foundations, docks, piers, and locks.
  • Initial set 1-3 mins, final set 3-4 mins.
Check Stock

QUIKRETE Pre-Mixed Stucco Patch 865032

  • Can be applied underwater, or to active leaks.
  • Can be used interior and exterior, above or below grade, and for horizontal or vertical repairs.
  • Uses include: Basements, Elevator pits, Conduits, Sea walls, Swimming pools, Tunnels, Storm drains, Foundations, Docks, Piers, Locks.
Check Stock

Husky 1006 3 Piece High-Leverage Pliers Set with 7 Inch Diagonal Pliers, 8 Inch Long Nose Pliers, and 9 Inch Linesman Pliers

  • 7 INCH DIAGONAL PLIERS: These are primarily for cutting thick-gauge wire. The blade extends all the way out to the tip. Keeping this alongside either your linesman or long nose pliers is a must.
  • 8 INCH LONG NOSE PLIERS: These are ideal for grabbing, twisting, cutting, threading, or looping wire in tight spaces. The plier heads feature teeth that keep a firm grip on whatever material you’re working with.
  • 9 INCH LINESMAN PLIERS: These are ideal for cutting, crimping, and pulling wire through conduits. With a stubbier head, they cannot reach the same areas as the long nose pliers, but what they lack in reach they make up for in grip strength. These are ideal for rougher, more commercial applications.
  • HEAT-TREATED STEEL: These pliers are made of a strong alloy that resists impact and corrosion. Heat treating the metal keeps its cutting edges sharper for longer and the teeth gripping stronger.
  • RUBBERIZED OVERMOLD allows you to keep a firm grip on these pliers while working in slippery conditions.
Check Stock

Alpinestars Evolution Back Protector, X-Small, Black White Red

  • 57% Polyester/10% Polyethylene/6% Spandex/15% Polyurethane/12% Polyamide.
  • Removable and replaceable Level 1 CE-certified back protector.
  • Slim profile ensures the protector can easily fit under your jersey.
  • Back protector pocket can also house hydration pack.
  • Front and back conduits for hydration pack hose.
Check Stock

Pro Tapes P-28/BRN07522 P-28 All-Weather Colored Electrical Tape: 3/4\ x 66 ft, Brown

  • Nitto (previously Permacel brand name) P-28 has been replaced by Pro Tapes P-28 and the labeling will now reference the Pro P-28 name..
  • Pro Tapes P-28 All-Weather Colored Electrical Tape is a premium grade, all-weather multi-purpose electrician's tape. Designed for color coding.
  • and radio, television, appliance repair work. Ideal for industrial maintenance applications and for wrapping tool handles.
  • Resistant to UV rays, moisture, solvents, alkalis, and abrasion. It features a durable, flexible PVC film coated with a non-corrosive rubber-based adhesive. Pro P28 is CSA certified, UL listed, flame retardant, cold and weather resistant. On a 1.5-inch inner diameter core. Rolls come individually packaged in a plastic container..
  • Carrier/Backing: plasticized polyvinyl chloride (PVC) film. Adhesive: rubber-based. Thickness: 7 mils (carrier, adhesive)..
  • Tensile Strength: 20 pounds per inch (longitudinal). Dielectric Breakdown: 600 volts. Service/Operating Temperature: up to 221F. Elongation: 200%. Adhesion to Steel (Oz Per Inch): 11.7. to 14.3. Core: 1-1/2-inch diameter..
Check Stock

Pro Tapes P-28/WI07522 P-28 All-Weather Colored Electrical Tape: 3/4\ x 66 ft, White

  • Nitto (previously Permacel brand name) P-28 has been replaced by Pro Tapes P-28 and the labeling will now reference the Pro P-28 name..
  • Pro Tapes P-28 All-Weather Colored Electrical Tape is a premium grade, all-weather multi-purpose electrician's tape. Designed for color coding.
  • and radio, television, appliance repair work. Ideal for industrial maintenance applications and for wrapping tool handles.
  • Resistant to UV rays, moisture, solvents, alkalis, and abrasion. It features a durable, flexible PVC film coated with a non-corrosive rubber-based adhesive. Pro P28 is CSA certified, UL listed, flame retardant, cold and weather resistant. On a 1.5-inch inner diameter core. Rolls come individually packaged in a plastic container..
  • Carrier/Backing: plasticized polyvinyl chloride (PVC) film. Adhesive: rubber-based. Thickness: 7 mils (carrier, adhesive)..
  • Tensile Strength: 20 pounds per inch (longitudinal). Dielectric Breakdown: 600 volts. Service/Operating Temperature: up to 221F. Elongation: 200%. Adhesion to Steel (Oz Per Inch): 11.7. to 14.3. Core: 1-1/2-inch diameter..
Check Stock