Top Non metallic Tubing

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

THINBIT 3 Pack SPT045D5 'S' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • ...erforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of the hoses)..
  • British inch Size: Compared with other metric size metal clamps, our 1 inch worm clamps were engraved clear 5/8 to 1-1/16 inch on band for easy and fast identification when using..
  • All 304 SS: The housing, screws and band of our tubing clamps are all made of high quality 304 stainless steel. The neutral salt spray(NSS) test is 100 hours. Our SS 304 screws are plated for smooth tightening, enhancing corrosion protection level and meeting the marine grade hose clamps requirement but costing less than SS 316. These stainless clamp 1 inch, compatible with SAE J 1508 standards, are ideal for 3/4 silicone heater hose, garden sprinkler etc..
Check Stock

8 Pack 1 1/2 Inch Round Plastic Plug, Pipe Tubing End Cap, Glide Insert Furniture Finishing Plug for Round Metal Tube

  • ** Measure Carefully! ** PLUGS WILL NOT FIT 1 1/2″ OPENING ►APPLICABLE SIZE-These round tubing end caps fits 1-1/2″ OD round tubing (one inch OUTSIDE diameter) with INSIDE hole diameters (ID) from 1.32″ – 1.43″ and wall thickness of .031″ – .059″ Steel Pipe..
  • ►Perfect Fit For Indoor and Outdoor Use- These Round Plastic Tubing Plug serve as a long-lasting solution for many household or outdoor projects including replacements for metal tube, lighting stand cross bar, boat seat post holes, bakers rack, bunk bed ladde, iron loveseat, tubular shaped metal legs, pre-runner bumpers, wrought iron patio chairs, wrought iron glider swing, wooden slat lawn chair, dining room chairs, chair legs, bar stool, kitchen chair, hollow leg chairs, or any round opening..
  • ►The premium plastic plug can supply a clean look, and they are gentle on floors causing no markings, work great for preventing scuffs on wood floor or as protection glides on chair tips, bar stool foot sliders, bench feet, table legs, patio furniture inserts, chair leg protectors, and much more. Strong plastic plugs and they glide nicely on a wood deck.
  • ►These round tubing caps made of Premium Quality Plastic, sturdy, Durable shockproof and waterproof....
Check Stock

THINBIT 3 Pack LGPT045D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT085D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .043" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock

9' L Reciprocating Saw Blade, 5 pk.

  • 10 TPI, 9 in. Length, Bi-Metal Construction.
  • 1/2 in. Universal Tang fits all Sawzalls.5 blades per pouch.Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.Limited warranty.
  • 1/2 in. Universal Tang fits all Sawzalls.
  • Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.
Check Stock

HoldRite 261J8 Silencer Thru-Stud Isolator, 1/2 Inch, 8 Pack

  • IDEAL: Thru-stud isolators for metal studs/brackets with CTS insert.
  • POSITIONING: Dissimilar metal isolation for copper, CPVC, and PEX tubing.
  • THRU-STUD ISOLATION: Tubing isolation, dissimilar metal isolation, and vertical and horizontal applications.
  • VERSATILE: Integrates with HoldRite #121 and #125 Series brackets.
Check Stock

Houseables Vinyl Tubing, Clear, 1/4\ ID x 3/8\ OD, 100 Ft, Food Grade Tube, PVC Plastic, Flexible Hose, Flex Pipe For Water, Beverage Pump, Homebrew, Wine Siphon, Brewing Bottling Wand

  • LIGHTWEIGHT AND DURABLE - Tubing is made of a clear PVC material that is lightweight and flexible. Twists and curves won’t cause the tubing to collapse or be damaged. PVC material is resistant to abrasions and corrosion. The lab-grade material is designed to fight against hardening and discoloration..
  • MULTIPURPOSE - Our plastic tubing has been designed for autoclavable vacuums or as a transfer hose. Great for food and beverage dispensing, deionizing water, and powdered food items. Transfer air, water, or liquid food through the tubing, seamless..
  • NON-TOXIC - Our clear vinyl-flex tubing is free of any toxins and is safe to use with food or water that will be consumed. Plastic tubing is free of any phthalates, latex, and BPA. Always wash before first use..
  • 100 FEET IN LENGTH - With 100 feet of PVC tubing, there will be more than enough for any of your needs. Commonly used for beer kegs, winemaking, aquaponics, or as an air hose. Can also be used for non-invasive medical, dental, or veterinary purposes..
  • RESILIANT AGAINST CHEMICAL EXPOSURE: Our vinyl tubing will persevere through its usage in situations where it is used to deliver pharmaceuticals to aid the those under hospital care. It was built to assist and withstand exposure to medications in loc....
Check Stock

THINBIT 3 Pack LGPT045D57L 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT025D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock