Top Nooelec Nesdr Mini

Nooelec NESDR Smart v4 SDR - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & R820T2-Based Software Defined Radio

  • Premium Software Defined Radio 'NESDR SMArt' in a beautiful brushed aluminum enclosure. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6).
  • An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR).
Check Stock

Nooelec NESDR Smart v4 Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.

  • Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon (Product ID B009LQT3G6).
  • An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR).
Check Stock

Ham It Up Plus - HF/MF/LF/VLF/ULF Upconverter w/TCXO

  • A high-quality RF (ULF/VLF/LF/MF/HF) converter for software defined radio devices like our NESDR series (RTL-SDR) and the HackRF--extends your radio range down to 300Hz.
  • The Ham It Up Plus is fully assembled in a custom, black, aluminum enclosure, tested, and ready to use. Includes SMA to SMA connector to attach the output to your radio, and an SMA to BNC antenna adapter..
  • A separate noise source circuit is included for testing and calibration of various RF devices.
  • Proudly made in the USA and Canada! Full 2 year product warranty, directly through Nooelec.
  • Ham It Up Plus has all the same fantastic features as the popular Ham It Up (v1.3), and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons (available separately).
Check Stock

NESDR SMArTee v2 Bundle - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio (SDR)

  • An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases!.
  • Unmatched price & performance–redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed .
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues–run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!.
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software.
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

NESDR Smart v4 RTL-SDR Essentials Starter Kit - Includes Everything to Start with Software Defined Radio Including Premium SDR Flamingo FM Bandstop Filter 3 Antennas 10 Adapters & Case

  • Includes all hardware and software (free download) you need to get started with software defined radio!.
  • Listen (and see!) nearly any RF signal within the frequency capability of the radio (27-1700MHz).
  • Included is an NESDR SMArt v4 RTL-SDR, 3 antennas, a "Flamingo FM" broadcast FM bandstop filter, 10 RF adapters and cables, and a carrying case.
  • Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support....
  • Amazon-exclusive bundle! Only available for a limited time.
Check Stock

NooElec SAWbird+ GOES - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA GOES/LRIT/HRIT/HRPT Applications 1688MHz Center Frequency

  • SAWbird+ GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites.
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP).
  • Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!.
Check Stock

NESDR SMArTee v2 SDR - Premium RTL-SDR w/Integrated Bias Tee Aluminum Enclosure 0.5PPM TCXO SMA Input RTL2832U & R820T2-Based Software Defined Radio

  • Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the....
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension....
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna....
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

RaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors

  • Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58.
  • Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios.
  • Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One.
  • Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1..
  • Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!.
Check Stock

SMA Adapter Connectivity Kit 8 Adapters for NESDR RTL-SDR SMA Radios w/ Case

  • A great addition to any radio or software defined radio with female SMA input, including our NESDR SMArt series and HackRF.
  • 8 male SMA adapters in total, allowing you to connect the following antenna types to your radio: N-connector, F-connector (aka 'Coax'), SO-239 (aka....
  • A convenient carrying case is included. Great for field use! Ample room to house your NESDR SMArt or NESDR Nano SDR.
  • 50 Ohm, low-loss adapters--lower loss than any RF cable adapters.
  • NOTE: RP-SMA looks similar, but is not the same! These will not work for RP-SMA. RP-SMA is generally only used for things like WiFi equipment, not....
Check Stock

Nooelec NESDR Smart XTR HF Bundle: 100kHz-1.7GHz Software Defined Radio Set for LF/HF/UHF/VHF. Includes NESDR Smart XTR RTL-SDR, Ham It Up Plus Upconverter, 3 Antennas, Balun, Adapters

  • A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands. Frequency range is 100kHz-1.7GHz (with a frequency gap near 1.1GHz).
  • The NESDR SMArt XTR HF Bundle utilizes a well-designed upconverter--the Ham It Up Plus--to receive HF, instead of utilizing a direct sampling hack as with most other low cost HF SDRs. This results in a vastly different HF experience--much better performance, and no loss of gain controls.
  • Included is a Ham It Up Plus upconverter, installed in a custom silver aluminum enclosure with fully build noise source circuit.
  • an NESDR SMArt XTR RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters and cables.
  • Amazon-exclusive bundle! Only available for a limited time. Due to the frequency gap this is NOT recommended for ADS-B. Instead try our NESDR SMArt HF Bundle (Amazon product code B0747PX3NZ).
Check Stock

JYETech ‘DSO Shell’ Oscilloscope DIY Kit w/Enclosure & Clip Probe by Nooelec. Low Cost Digital Storage Oscilloscope with 2.4″ TFT LCD. Model DSO150 (DSO 150); SKU 15001K

  • Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included..
  • DSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″ color TFT LCD (320×240) display and optical encoder for navigation.
  • We strive to send the most current revision available. The current PCB version shipping for this listing is revision ‘E’, which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec’s or JYETech’s website.
  • Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase.
  • 24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise.
Check Stock

Great Scott Gadgets Ubertooth One Antenna & Aluminum Enclosure Bundle by Nooelec

  • Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminum enclosure and a....
  • All bundle components covered under warranty for 1 year, directly through Nooelec.
  • Ubertooth One is a configurable 2.4GHz transceiver with great application software and support.
  • and with suitable transmit power and receive....
  • Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector.
  • Expansion connector intended for inter-Ubertooth communication or other future uses.
Check Stock