Top Note Ir Blaster

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 10FT

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the....
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip:....
Check Stock

moretop Wireless Video & Audio Transmitter and Receiver 5.8GHz 8 Channel RCA 480P Sender with IR Remote Extender for Streaming Cable, Satellite, DVD to TV Wirelessly for RCA Cable (MT-RCA50)

  • Easily extend 1080P HDMI video and audio signal up to 300ft line-of-sight without wires! Simple plug and play installation with no complicated setup or configuration. Powerful dual antenna design and 5GHz signal band reduces interference and increases range. Note: range is reduced indoors due to doors, walls, and interference..
  • Built-in HDMI signal splitter in the Transmitter unit provides an HDMI output jack, which can connect to a near by TV using an HDMI cable - there is no need to buy a separate HDMI splitter!.
  • IR signal pass-back function relays remote control commands back to playback source, IR signal receiver and blaster cables are included!.
  • 0.07 to 0.2 second transmission latency depending on signal quality - great for movies, TV, videos, and presentations. May not be suitable for some types of gaming or PC use..
  • Video: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz. Audio: PCM Only. NOTE: Dolby and DTS NOT SUPPORTED. NOTE: If multiple sets of the transmitter and receiver are installed near each other, only powered on one set at a time to prevent signal crossing..
Check Stock

OREI 1x4 HDMI Extender Splitter Over Single Cable CAT6/7 1080P With IR Remote EDID Management - Up to 132 Ft - Loop Out - Low Latency Black

  • Distribute 1 HDMI source to 4 HDMI displays over Network Cable Simultaneously..
  • HDMI Transmitter is equipped with 4 Port CAT6 Output. And 1 Additional HDMI Output to connect to a local display or monitor..
  • IR Remote Control. Supports 20~60Hz IR Pass Back, Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables....
  • Plug & Play Setup without any Software Installation. Compatible with CAT6/6a/7 Network Cables. The highest Resolution Supported is 1920×[email protected],....
  • Includes: 1 x Transmitter, 4 x Receivers, 4 x Power Adapter, 1 x IR Blaster Cable, 4 x IR Receiver Cables, 1 x User Manual. 1 Year OREI Manufacturer's....
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • ...IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will inter....
Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

  • IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
  • Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
  • Place the IR emitter blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
  • Compatible with most A/V equipment with infrared sensors (not RF).
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • ...IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will inter....
Check Stock

AVerMedia EZRecorder, HD Video Capture High Definition HDMI Recorder, PVR, DVR, Subscription Free, Schedule Recording, IR Blaster (ER310)

  • 1-click record and snapshot, record 1080p30 HD video from your cable / satellite service providers, camcorder, game console via HDMI/component connection..
  • Work with your set-top box for scheduled recording via IR blaster, please view SOP of IR Blaster learning at the technical specification section..
  • Save in MP4 and JPEG to enjoy on PC or any mobile device. HDCP - protected content cannot be recorded.
  • Internal and external hard drives with at least 500G capacity are recommended, and maximum 2Tb for external hard drive..
  • Internal hard drive is Not included. Please format your hard drive to NTFS before using it. USB Hubs, card readers, FAT format, NAS, Kingston UV400 series SSD, SanDisk SSD Plus or HDDs over 2TB capacity are not supported.DescriptionEzrecorder 310 is a digital video Recorder that records and stores TV shows for you to enjoy at any time. It works like a VCR but no tape is required. Instead, everything is stored inside a hard drive for easy video playback and managing. Better yet, ezrecorder 310 automatically turns your set-top box on and records video at a scheduled time so you'll never have to rush home for your favorite shows again..
Check Stock

Professional 4K 4X4 HDMI Matrix Video Wall by OREI - Seamless Switching HDCP 2.2 UltraHD 4K @ 60Hz 4 4 4 Switcher & IR Control Audio Extract RS-232 - Zero Latency 4 Displays 2x2 Video Wall @ 1080P

  • Support 18 Gbps video bandwidth, HDMI 2.0 and HDCP 2.2 compliant.
  • Support video resolution up to 4K60 4:4:4, Color space: RGB, YCbCr 4:4:4, YCbCr 4:2:2.
  • Support seamless switching, video wall function @ 1080P, Audio matrix and IR matrix function, external L/R audio insert on HDMI stream & EDID....
  • Support front panel, RS232, TCP/IP (LAN 10M/100M) control.
  • Includes - 1 x 4x4 seamless UHD Matrix, 1 x AC Power Cord, 1 x Matrix IR Remote, 4 x IR Receiver cable (1.5 meters), 4 x IR Blaster cable (1.5....
Check Stock

Brihome Smart IR Remote Mini WiFi Universal IR Blaster Hub One for All Control AC Air Conditioner TV STB DVD Fan TV Box Compatible with Alexa Google Assistant

  • ALL IN ONE CONTROL: the smart IR remote can control all infrared appliances, such as TV, Air Conditioner, fan, DVD, STB, TV box etc. Support 80,000+IR....
  • APP CONTROL: can control infrared appliances with "Smart Life" APP anytime anywhere (Compatible with Android & iOS)..
  • SMART SCENARIO: can control multipe devices in one tape and run the devices as set. Or control automatically the device according to conditions such....
  • VOICE CONTROL: works with Alexa, Google Assistant, and IFTTT. The smart IR blaster can control your infrared home appliances with a simple voice....
  • 360 DEGREES REMOTE CONTROL: as long as there is no obstacle to block the universal smart IR remote control, it can be within 10 meters distance, 360....
Check Stock

OREI 1x4 HDMI Extender Splitter Multiple Over Single Cable CAT6/7 1080P with IR Remote EDID Management - Up to 165 Ft - Loop Out - Low Latency - Full Support

  • Distribute 1080p 1 HDMI source to 4 HDMI displays over network cable simultaneously, Splitter included - no Switcher needed - power over LAN cable -....
  • Hdmi transmitter is equipped with 4 port Cat6 output. And 1 additional HDMI output to connect to a local display or monitor..
  • Ire remote control. Supports 2060Hz IR pass back, control a DVD player or other HDMI video source from a remote location with the included IR cables....
  • Plug & play setup without any software installation. Compatible with Cat6/6a/7 network cables. The highest resolution supported is 1920×[email protected],....
  • Includes: 1 x Transmitter, 4 x receivers, 1 x Power adapter, 1 x IR blaster cable, 4 x IR receiver cables, 1 x user Manual. 1 Year Ore Manufacturer's....
Check Stock

NERF Alien Menace Digital Target

  • STAR WARS BLASTER REPLICA: This dart-firing blaster is meticulously detailed, capturing the look of the Amban Phase-pulse blaster seen in The Mandalorian live-action TV series on Disney Plus.
  • MEASURES OVER 50 INCHES LONG: The blaster measures 50.25 inches long (1.27 meters) and comes fully assembled in premium packaging, perfect for display.
  • BLASTER SOUNDS AND ELECTRONIC SCOPE WITH ILLUMINATED LENS: Features accurate blaster sounds and an electronic scope with an illuminated lens (Requires 2x 1.5v AAA alkaline batteries, not included).
  • 10 NERF DARTS, BREECH LOAD, PRIMING HANDLE: This series-accurate, breech-load blaster has a handle you pull back to prime the blaster and includes 10 Official Nerf Elite foam darts.
  • THE MANDALORIAN: The Mandalorian is battle-worn and tight-lipped, a formidable bounty hunter in an increasingly dangerous galaxy.
  • Nerf Darts are on right side of blaster box in paper wrap under plastic packaging. Please note there are no darts in the cardboard box provided..
Check Stock