Top Nozzle Spout Kit

Apache 99000276 3/4" Manual Gravity Flow Fuel Nozzle Kit

  • Required for use with 12 or 110 volt "electric" pumps.
  • Recommended for dispensing gasoline, up to 15 percent ethanol, diesel fuel, kerosene and oil.
  • Kit includes: 3/4" x 14' fuel transfer hose with static wire, 3/4" manual nozzle with swivel attached, 15/16" spout (UL approved), and nozzle splash guards.
Check Stock

Replacement Gas Can Spouts Improved Design Gasket Flexible Pour Nozzle with Vent Cap for Older Gas Can Fuel Water Jug 1 2 5 Gallon White

  • Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak.
  • Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling.
  • Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss.
  • Compatible with Most of gas cans and 1/2/5/10 gallon: Universal gas can spout kit comes with two different collar screw cap, fine thread and coarse thread collar cap ,fit most of the cans.
  • Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)drill bit. 3 Kits included.
Check Stock

19 pcs Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal ，3 Bendable Tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 Threaded caps ，6 Vent Caps 1 Drill Lid

  • ... Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible.
  • The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down..
  • We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit，helping you save your old gas can instead of buying a new one..
Check Stock

2 Jerry SPOUT Gasket Fuel Blitz Metal Gas Can Spout GSKT 5 Gallon Military 20L 2

  • COMPLETE BLITZ GAS CAN SPOUT REPLACeMENT KIT. This kit includes 3 replacement nozzles, 3 gas can vent caps, and 3 no spill gas can nozzle caps. Best replacement gas can spout new and older style Blitz gas cans..
  • REPLACEMENT THE HASSLE OF NO SPILL SPOUTS These easy pour gas can spouts are made to replace the clunky no spill spouts that are often difficult to use, along with old, outdated, and worn Blitz gas can nozzles..
  • LEAK PROOF DESIGN. Made from high quality high-grade plastic, extra thick gaskets, thread base rings, and secure locking nozzle tips making these leak proof when being handled or transported..
  • STRONG SOLID NOZZLES FOR STRENGTH DURABILITY WHEN FILLING ANY MACHINE. These convenient pour nozzles are solid and sturdy enough to rest directly onto the fuel filler tube of and gas tank minimizing messy spills and fatigue..
  • WE STAND BY OUR PRODUCT. At Super Spouts we always stand by the quality and function of our products, are based in the USA, and back every purchase with a no questions asked money back guarantee..
Check Stock

Super Spouts Gas Can Spout Replacement for Blitz Old Style Nozzles with Caps and Vents. 3 Pack

  • COMPLETE BLITZ GAS CAN SPOUT REPLACeMENT KIT. This kit includes 3 replacement nozzles, 3 gas can vent caps, and 3 no spill gas can nozzle caps. Best replacement gas can spout new and older style Blitz gas cans..
  • REPLACEMENT THE HASSLE OF NO SPILL SPOUTS These easy pour gas can spouts are made to replace the clunky no spill spouts that are often difficult to use, along with old, outdated, and worn Blitz gas can nozzles..
  • LEAK PROOF DESIGN. Made from high quality high-grade plastic, extra thick gaskets, thread base rings, and secure locking nozzle tips making these leak proof when being handled or transported..
  • STRONG SOLID NOZZLES FOR STRENGTH DURABILITY WHEN FILLING ANY MACHINE. These convenient pour nozzles are solid and sturdy enough to rest directly onto the fuel filler tube of and gas tank minimizing messy spills and fatigue..
  • WE STAND BY OUR PRODUCT. At Super Spouts we always stand by the quality and function of our products, are based in the USA, and back every purchase with a no questions asked money back guarantee..
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • ...allon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,Each set of products includes,12 Screw Collar Caps(6 C....
Check Stock

Quick Pitch Shower Slope System with Universal Center Drain Kit

  • IMPROVED VERSASPRAY DESIGN: Danco improved the Versa spray design, to include an adjustable metal clamp that attaches around the rubber nozzle fitting to help secure the sprayer nozzle onto the bathtub spout.
  • COMPATIBILITY: VersaSpray handheld shower sprayer ONLY FITS standard size round or square shaped garden tub spout and BATHTUB SPOUTS WITHOUT DIVERTER.
  • GARDEN TUB SPRAYER ATTACHEMENT NOZZLE IMPROVED: The nozzle material was changed to be softer and more pliable and will stretch up to approximately 2 inches when installed on a tub spout.
  • PRE-INSTALLATION NOTE: To make the installation easier, it is recommended to soak sprayer nozzle in hot water for 5 minutes to allow rubber to soften so it will stretch to fit your tub spout. This is important for a snug fit on the tub spout when in use.
  • 42 INCH RUBBER HOSE LENGTH: This portable handheld bathtub sprayer is ideal for washing pets, bathing children, rinsing hair and cleaning tub.
  • 2.2 GPM WATER FLOW: Gradually turn water on slowly then graduate to a full water flow to ensure no leaks or unnecessary spraying from the nozzle attachment.
  • “THERE’S A DANCO FOR THAT” BRAND ADVANTAGE: This portable handheld showerhead comes with the trusted, reliable Danco brand, for more than 50 years, Danco has continued ....
Check Stock

Kool Products Yellow Replacement Spout Kit with Stainless Steel Filter and Vent Plug(3 Pack). This Spout is Rigid and not as Flexible as You Expect.

  • IMPROVED GASKET: We have recently improved the strength and material of our gasket so that it doesn't break with no leaks or mess of any kind. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products. This Flexible Gas Can Nozzle also has a smooth flow action manufactured excellently..
  • VENT CAPS: (3) Push-in vent caps are included for quick and safe emptying..
  • CUSTOMER SATISFACTION: KP Kool Products spout kits are very easy to use. Please let us know if you have any issue and we will make sure its taken care right away..
Check Stock

A+ Universal Gas Can Spout Replacement Kit, Water Jug Or Gas Can Spout, Update Your Old Can, 5 Pack

  • High Quality: The Gas Can Spout Kit are made of high strength ABS plastic, which are bendable and durable..
  • Easier to Pour: The Gas Can Nozzle flexible design bends up to 90 degrees, You can adjust the angle to pour gas into tank simply and easily.
  • No More Spilling: This Flexible Pour Nozzle with Gasket, When you pouring the liquid, you will never spill gas all over yourself and your equipment again, Save fuel at the same time.
  • All You Need: Package includes: 5* White Spouts with rubber gasket, 5 * Spout Caps, 10 *Screw Collar Cap (5 yellow and 5 Black), 5 * Black Rear Stripe Cap..
Check Stock

Commercial Wall Mount Kitchen Faucet, 8 Inch Center 2-Handles Commercial Kitchen Sink Faucet with 6\ Swivel Spout for Backsplash Mount Restaurant Industrial Sink Faucets Chrome Finish

  • 8-inch Center Adjustable Wall Mount Faucet: 8 inch adjustable center commercial faucet with 6 inch Swivel nozzle spout. The eccentric flange design allows you to manually adjust the center distance from 7" to 9". Very convenient used for home, restaurant, industrial kitchen sinks..
  • 360°Rotated Swivel Spout Faucet: 2-handles hot & cold water temperate control, it also features 2 color coded handles, which can direct hot or cold water to anywhere you desire. 360 degree swing nozzle spout, it can reach all the sink place. Easy to clean and control..
  • Lead-free Commercial Sink Faucet: 2.2 GPM max water flow. Lead free brass constructed with superior rust-resistant, chrome polished finish. Easy to clean and long lifespan. The commercial sink faucet comes with a removable aerator that allow you to connect the hose. (tips: please make sure each gasket in your female connectors).
  • Easy to Find Faucet Installation Parts: We sell the other size spouts like(8/10/12/14 inch spout), you can search “KWODE” to find it. If you need 90°Angle backsplash installation kit, please search for this asin:B082SBPV2H..
  • Quality Guarantee: All the parts included the package, amazon provides a 30-day free refund, 5 years replacement warranty for mainly body and 12 mont....
Check Stock

2 PACK Gas Can Stopper Cap Replacement Part or Spout Cap Compatible with Midwest Scepter Moeller Eagle Gott Rubbermaid Essence Igloo Blitz StanCan Kolpin RotopaX can,For Plastic Fuel Tank

  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, you can bend freely without breaking.Thicker....
  • Update your old gas can with these flexible spout, you will never spill gas all over yourself and your equipment again.
  • Push - in vent cap for faster and safer emptying, filter/flame arrestor prevent any serious damage for smoother and cleaner pouring.
  • Gas Can Spout Kit Come with Fine&Coarse thread screw caps, UNIVERSAL compatible with Rubber main Essence Blitz and Gott Scepter Midwest most of....
  • Kit includes (1) Flexible gas spout, (1) spout cap with string, (1) "O" ring gasket, (2) base caps, (1) push-in vent cap,(1)black rear vent cap. 3....
Check Stock

Gas Can Spout Replacement 5 Gal (4 Pack) Gas Can Nozzle For Blitz Old Style Gas Cans, Includes Nozzles, Caps and Vent Caps

  • COMPLETE BLITZ GAS CAN SPOUT REPLACeMENT KIT. This kit includes 4 replacement nozzles, 4 gas can vent caps, and 4 no spill gas can nozzle caps. Best replacement gas can spout new and older style Blitz gas cans..
  • REPLACEMENT THE HASSLE OF NO SPILL SPOUTS These easy pour gas can spouts are made to replace the clunky no spill spouts that are often difficult to use, along with old, outdated, and worn Blitz gas can nozzles..
  • LEAK PROOF DESIGN. Made from high quality high-grade plastic, extra thick gaskets, thread base rings, and secure locking nozzle tips making these leak proof when being handled or transported..
  • STRONG SOLID NOZZLES FOR STRENGTH DURABILITY WHEN FILLING ANY MACHINE. These convenient pour nozzles are solid and sturdy enough to rest directly onto the fuel filler tube of and gas tank minimizing messy spills and fatigue..
  • WE STAND BY OUR PRODUCT. At Super Spouts we always stand by the quality and function of our products, are based in the USA, and back every purchase with a no questions asked money back guarantee..
Check Stock