Top Npt To 10an

GlowShift 3in1 Analog 60 PSI Boost Gauge Kit with Digital 2200 F Pyrometer Exhaust Gas Temp EGT & 300 F Temperature Readings - 10 Selectable LED Colors - Black Dial - Clear Lens - 2-3/8' 60mm

  • GlowShift 3in1 Diesel Combo Gauge Allows Users to Monitor 3 Vital Engine Components from 1 Unit with an Analog Boost & Blue Digital Exhaust Gas Temperature & Temperature Displays.
  • Analog Boost Readings from 0 to 60 PSI – Digital EGT Readings from 200° to 2200°F – Digital Temperature Readings from 68° to 302°F.
  • 2-3/8″ (60mm) Diameter Gauge with Black Dial, Clear Lens & Illuminated Red Needle – 10 Solid Color Modes & 2 Color Cycle Modes – 6 Daytime & Nighttime Dimming Modes.
  • Boost Gauge Parts: 1/8-27 NPT Pressure Sensor & 8′ Sensor Harness – EGT Gauge Parts: 1/8-27 NPT EGT Probe with 3′ of Wire & 6′ Sensor Harness – Temperature Gauge Parts: 1/8-27 NPT Temp Sensor & 8′ Sensor Harness – 3′ Power Harness, Dashboard Pod, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift Tinted 7 Color 100 PSI Oil Pressure Gauge Kit - Includes Electronic Sensor - Black Dial - Smoked Lens - for Car & Truck - 2-1/16" 52mm

  • GlowShift 10 Color Digital Series Dual Temperature & Pressure Gauge Allows You to Monitor 2 Vital Engine Statistics from 1 Unit - Keep an Eye on Water, Transmission, Oil or Differential Temperatures, as well as Boost, Oil or Fuel Pressure.
  • Temperature Readings from 68° to 302° Fahrenheit - Pressure Readings from 0 to 145 PSI - Set Each Display to its Own Color - 2-1/16" (52mm) Gauge with 2 Digital Displays & Tinted Lens.
  • Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
  • Includes 1/8-27 NPT Temperature Sensor, 1/8-27 NPT Pressure Sensor, (2) 9' Sensor Harnesses, 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

PneumaticPlus SAR400T-N04BG Compressed Air Regulator 1/2\ NPT, T-Handle, Gauge & Bracket

  • 3/8" NPT Air Regulator w/Gauge - Precise Pressure Regulation.
  • Zinc Alloy Body- Higher Hardness and More Compression Resistance than Aluminum Alloy and Plastic Materials..
  • Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage..
  • Operating Pressure: 0-10 Bar (0-145 psi).
  • Flow Rate: 88 SCFM @ 90 psi (2500 L /Minute @ 6 Bar).
  • Temperature Range: 41-140°F(5-60℃)..
  • Includes 0-150 psi Gauge & Metal Bracket, a pair of 3/8" NPT Brass Air Coupler& Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

NQN 12 Foot 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, Gas Cooker 3/8inch Female Flare Fitting, Stainless Steel Braided Hose and Gas Grill LP Regulator

  • 【GardenNow Upgraded 12 FT 350 PSI high-pressure Propane extension Hose】This Propane Extension Hose upgrade to come with powerful 7 different couplings adapter fitting: 3/8" NPT Male x 3/8" NPT Male, 1/2" Female NPT x 3/8" Flare Male, 3/8" NPT Male x 3/8" Flare Male, 3/8" Flare Male x 3/8" Flare Male, 1/4" NPT Male x 3/8" Flare Male, 1/8" NPT Male x 3/8" Flare Male, 3/8" Brass Gas Ball Valve. These conversion connection extand the outdoor.
  • 【Premium Material】3/8" female flare fittings on both ends and 7 different types of adapters fittings kit of this 3/8" propane hose are made of 100% Solid Brass to ensure secure and durable for long-lasting to use. The 3/8” Female Flare propane hose is made of durable stainless steel braided with anti corrosion, anti-aging, air tightness, heat-resistance, flexibility features. This propane extension hose with CSA Certification, ensures air tightness and stability. High Pressure: 350 PSI..
  • 【Standard Fittings】This 3/8" Female Fitting x 3/8" Female Fitting Propane Hose comes with 7 different types of adapter adapters. Excellent 3/8" ....
Check Stock

70" 6AN SS Braided Transmission Cooler Hose Lines,for 700R4 4L60 4L60E 4L65E 4L80E,Compatible with Ford C4/C6/AOD & GM Chevy 1996-2021

  • 【Compatible With】:Applicable to GM turbo 350 (partially 1 / 4 "NPT), turbo 400,turbo 200-200R4,power glide (partially 1 / 4" NPT),700R4,4L60 4L60E,4L65E,4L80E,compatible with Ford C4/C6/AOD & GM Chevy 1996-2021..
  • 【Function】:Improving the cooling efficiency of the vehicle's gearbox helps to avoid heat related faults and thus extends the service life of the equipment..
  • 【70" 6AN Transmission Cooler Lines Kit Includes】:Two stainless steel braided hoses with an inner diameter of about 70 inches and 3 / 8 inches.
  • Four an-6 flared to 1 / 4 inch NPT billet adapters.
  • Two an-6 flared to 3 / 8 "NPT billet adapters.
  • four 90 degree an-6 reverse flared to an-6 flared billet adapters, two aluminum 4l80e adapter accessories..
  • 【Superior Material】:The transmission cooler pipeline kit adopts high-quality 304 stainless steel braided PTFE hose, which has good protection effect, soft, tough and wear-resistant. It is not easy to leak when operating under high pressure..
  • 【After Sales】:Please check the hose and fitting dimensions before ordering.1 ....
Check Stock

TurboWerx Ultra High-Performance Turbo Oil Electric Scavenge Pump 12V

  • 350F (175C) Fluid Temperature, 2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump , Hardened Bronze Gear Pump Rotors.
  • 10,000 Hour Rated Dual Hybrid Ball Bearings, 10,000 Hour Rated Over-sized Brushes.
  • Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings, Set of two 3/8” NPT -> AN Nickel-plated Adapters Included - Options are -6AN, -8AN, or -10AN Sizes - if size preference not specified at order time, -8AN supplied..
  • Warrant void if 350F (175C) rated temperature is exceeded, For 100% compatibility with 16-18V set-ups on race vehicles, choose the 24V Exa-Pump.
Check Stock

Olive Puller Not Damage The Pipe Olive Remover Ferrule Puller Corrosion-Resistant Copper Pipe Fittings Suitable for Brass Pipes with Diameters of NPT 1/2 Inch & NPT 3/4 Inches Ferrule Removal Tool

  • 【Warm tips】The outer packaging state of the olive puller is NPT 1/2 Inch and NPT 3/4 Inches, and the inner packaging state is 15mm+22mm. Due to a mistake in our warehouse,the size label in the inner package was wrongly attached. In fact, the pullers shipped by Amazon do indeed work on brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches.Please refer to the actual use..
  • 【Olive Puller That Will Not Damage The Pipe】This DUOYI olive puller is an ideal tool for taking out olives.Without damaging the pipe,puller utilises the compression fitting locking nut to remove the olives which used or damaged from the copper piping..
  • 【Suitable For Brass Pipes With Diameters Of NPT 1/2 Inch & NPT 3/4 Inches】The olive puller can work on air-conditioning pipes,and is suitable for brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches..
  • 【Abrasion-Resistant & Corrosion-Resistant Solid Brass】The DUOYI ferrule puller is made of high-quality solid brass,which not only has high strength and high hardness,but also has good wear and corrosion resistance. In addition,the olive puller has a smooth surface High,with high-grade texture,and long service life,can provide you with long-term service..
  • 【Easy To Use】Olive puller is easy to operate,and you can ....
Check Stock

HFS(R) Homebrew Beer Wort Chiller (7.5'' 2.9''/30 plate, 3/4\ x 1/2\ NPT)

  • 2.9"W x 7.5"L x 30 Plates (3.5"H) --- 1/2"NPT Wort Fitting x 3/4" NPT Water Fitting.
  • -321F to 392F Temperature Range - Max PSI 145.
  • Cools 10 gallon batches from 212F to 75F in 10 minutes.
  • Per FDA Regulation - 4-101.14 - Copper is completely safe to use in brewing equipment.
Check Stock

GlowShift 10 Color Digital Dual Temperature & Pressure Gauge Kit - for Boost, Oil Pressure, Water & Transmission Temp - Includes Electronic Sensors - 2 Multi-Color LED Displays - Tinted Lens - 52mm

  • GlowShift 10 Color Digital Series Dual Temperature & Pressure Gauge Allows You to Monitor 2 Vital Engine Statistics from 1 Unit - Keep an Eye on Water, Transmission, Oil or Differential Temperatures, as well as Boost, Oil or Fuel Pressure.
  • Temperature Readings from 68° to 302° Fahrenheit - Pressure Readings from 0 to 145 PSI - Set Each Display to its Own Color - 2-1/16" (52mm) Gauge with 2 Digital Displays & Tinted Lens.
  • Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
  • Includes 1/8-27 NPT Temperature Sensor, 1/8-27 NPT Pressure Sensor, (2) 9' Sensor Harnesses, 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

NANPU 1/2\ NPT Compressed Air Filter Regulator Lubricator (FRL), 5 Micron Brass Element, 0-150 psi Gauge, Manual Drain, Metal Bracket

  • 1/2" NPT Air Regulator w/Gauge - Precise Pressure Regulation.
  • Piston Type Pressure Regulating Screw - More Durable and Longer Life, Prevent Air Leakage..
  • Two-Way Installation: Air can be Input from the Left or Right, the Position of the Pressure Gauge and the Bracket can be Exchanged..
  • Operating Pressure: 0-10 Bar (0-145 psi).
  • Flow Rate: 97 SCFM @ 90 psi (2750 L /Minute @ 6 Bar).
  • Temperature Range: 41-140°F(5-60℃)..
  • Includes 0-150 psi Gauge & Metal Bracket, a pair of 1/2" NPT Brass Air Coupler& Plug Kit, 2 x 1/2" NPT Fittings, 1 x Thread Seal Tape..
Check Stock

RIDGID 44923 Model 690-I Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience.
Check Stock