Top Ntc Temperature Sensors

4pcs Temperature Controller Module with Case W1209 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with Waterproof NTC Probe

  • ...LED display, and a relay.100% complete machine patch, wave soldering, stable performance, good consistency..
  • 【Embedded CPU Chip】The XH-W1209 led display digital thermostat module embedded CPU chip (MCU), is more intelligent, lower power consumption.
  • Automatic power set memory, MCU built-in EEPROM memory unit..
  • 【Temperature Controller Parameter】Temperature range: -50-110°C.
  • Control precision: 0.1 celsius.Input power (DC): 12V.
  • Output: 1 channel relay output, capacity: 10A.
  • 【Waterproof NTC Probe】The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling.(The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin, which can protect the inside to prevent scratches.
  • And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.).
  • 【Package Includes】4pcs W1209 12V DC digital temperature controller board with case.(Ps: The product is not assembled, if you need assembly instructions or if you encounter any problems during use, you can contact us at any time. Thank you for ....
Check Stock

XINGYHENG STC-1000 DC 110V-220V 10A Microcomputer Digital Display Temperature Controller Thermostat Control Switch 2 Relay Output Cooling Heating  and NTC 10K Thermistor Sensors Temperature Probe

  • Super material: STC-1000 intelligent thermostat is an independent product, ABS flame retardant shell, a variety of fields perfect use, convenient....
  • Package including: 1 Pack of STC-1000 intelligent thermosta module, which is equipped with 1pcs NTC 10K temperature probe. The NTC probe is....
  • STC-1000 Digital Thermostat specification: Temperature control range: -50-99°C. Control accuracy of 0.1 degrees Celsius. Control temperature by....
  • High Power High Efficiency: Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop....
  • A wide range of applications: temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water....
Check Stock

UCONTRO Switchable -22 to 572 °F -30 to 300 °C Digital Temperature Controller Electronic Thermostat w/Alarmer & Probe for BBQ Grill Smoker Oven Stove Beer Brewing 110VAC

  • Comes with a NTC 100K Cylindrical Temperature Sensor Probe (Not including BBQ Meat Probe).
  • -30 to 300 °C (or -22~572 °F) temperature measurement and control.
  • Display resolution of 0.1 degrees, 1 degree control resolution.
  • Delay start function, 0-30 minutes adjustable.
  • Temperature measurement error: ± 1 Celsius.
Check Stock

Wholesale Sensors Replacement for Whirlpool 2188819 Thermistor 12 Month Warranty

  • The NTC thermistors Value: 1K ohm, 2K ohm, 5K ohm, 10K ohm,20K ohm, 50K ohm, 100K ohm, 200K ohm, 500K ohm, 1M ohm.
  • Characteristic: Small size and large power,large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
Check Stock

WINSINN HT-NTC100K Thermistor Sensor Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend Pack of 5Pcs

  • ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm.
  • ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature....
  • ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
  • ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees)..
Check Stock

FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs

  • Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the....
  • The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300℃ for a short time using, can replace the....
  • The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus....
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
Check Stock

Slimpal Period Heating Pad for Cramps, Portable Heat Pad for Menstrual Cramp Relief, Electric Wearable Rechargeable Cordless Heating Belt, 3 Timer Auto Off Setting, Gifts for Women Girl, Aqua

  • [3 Timer Setting - Auto Shut Off] Customize the usage time according to your own needs..
  • [Wearable Cordless Heating Pad] Lightweight and portable with a rechargeable design frees you up for other things at your desk, bed, or car without ever having to take off the device..
  • [Menstrual Pain and Cramps Relief] Featured with the latest graphene heating chip, This wireless electric heating pad will release safe and stable heat to the body and achieve fast heat in 5 seconds. Fast and continuous heating surrounds you to help with cramps or back pain..
  • [Constant temperature and Long Battery Life] Up to 6 hours of working time with a constant temperature. With NTC sensors control, work continuously and safely. Will not shut down every 30 mins..
  • [Heat & Vibration Care] With 3 vibration massage modes + 3 heated modes, the cordless heating pad allows you to customize a setting to achieve ultimate comfort by simply pressing the button to change the levels. It is suggested to use over clothes..
Check Stock

638285 Replacement Thermistor for Norcold, 12-Month Warranty

  • FEATURES: MF58 10K Ohm NTC Thermistors with B Value: 3950(+/-1%).
  • DESIGN: Glass sealed packaging with firm structure, small size and light weight, applicable in severe environments.
  • PERFORMANCE: High precision resistance, B values with high reliability and stability, high sensitivity.
  • APPLICATION: Suitable for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
  • PACKAGE: 20 Piece x Electrical Axial Lead NTC Thermistors Resistors.
Check Stock

XINGYHENG STC-1000 DC 12V 10A Microcomputer Digital Display Temperature Controller Thermostat Control Switch 2 Relay Output and NTC 10K Thermistor Sensors Digital Temperature Probe (12V)

  • Super material: STC-1000 intelligent thermostat is an independent product, ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical Settings, is your side temperature control housekeeper..
  • Package including: 1 Pack of STC-1000 intelligent thermosta module, which is equipped with 1pcs NTC 10K temperature probe. The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling..
  • STC-1000 Digital Thermostat specification: Temperature control range: -50-99°C. Control accuracy of 0.1 degrees Celsius. Control temperature by setting the temperature setting value and the difference value.
  • Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start..
  • High Power High Efficiency: Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature) It is precise and reliable with good long-term stability. Refrigerating contro,l output delay protection.Alarm when temperature exceeds temperature limit or when sensor error..
  • A wide range of applications: temperature controller is equipped with over 40’’ inch waterproof probe can be us....
Check Stock

FYSETC 3Pcs Upgrade HT-NTC100K 3950 XH2.54 2 Pin Cartridge Thermistor Sensor Ender 3 V2 Hotend Parts High Temperature 250 Degrees for Ender 3 5 Pro CR10 A8 Maker Pro Heater Block

  • Upgrade HT-NTC100K 3950 Thermistor: Pack of 3Pcs. Note: Temperature measurement head cylinder diameter is 3mm, length 15mm, The connector is 2pin....
  • The temperature measurement: -20 °C ~ +250 °C for a longer lifecycle, sometimes can reach +300℃(but not recommand to use it long time)can replace....
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. If need a....
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
Check Stock

IS Icstation Digital Thermometer, Car Auto Temperature Gauge Sensor, DC 4-28V Fahrenheit Dual Display, Monitor with 2 NTC Waterproof Probes for Aquarium Vehicle Fish Tank

  • NTC WATERPROOF PROBES - This aquarium thermometer uses high-precision NTC waterproof metal sensor probes to measure the water temperature of the aquarium..
  • DUAL SENSOR PROBES - Comes with 2 probes, enabling the thermometer to test the temperatures of two different places. For example, measuring the temp of indoor&outdoor or two different tanks at the same time..
  • RED&BLUE DISPLAY - Icstation temp sensor uses a HD LCD display to let you know the Fahrenheit temperature of the fish tank in real time, thus providing a healthy and comfortable water environment for your lovely fishes. The clear red and blue display makes it easy to read temperatures no matter in bright and dark..
  • WIDE TEMP RANGE - Temperature Range -58 ℉ ~ +257℉(Fahrenheit).
  • Temperature measurement accuracy: ±1℉ (±0.1℉ when temperature within -9.9~99.9F). It can be not only used in water but also used to measure the air temperature. But the water temperature will be more accurate than that of air..
  • 3 FEET WIRES - With 1 meter long wires, it is flexible to place the 2 sensor probes in aquarium tank, fish ....
Check Stock

KNACRO 2CH NTC Waterproof Probes -58℉ to 257℉ Blue + Red LED Digital high Temperature Precision Thermometer Industrial Thermometer Fahrenheit Dual Display DC 5-80V 12V 24V 36V 48V 60V 72V CAR

  • NTC WATERPROOF PROBES - This aquarium thermometer uses high-precision NTC waterproof metal sensor probes to measure the water temperature of the aquarium..
  • DUAL SENSOR PROBES - Comes with 2 probes, enabling the thermometer to test the temperatures of two different places. For example, measuring the temp of indoor&outdoor or two different tanks at the same time..
  • RED&BLUE DISPLAY - KNACRO temp sensor uses a HD LCD display to let you know the Fahrenheit temperature of the fish tank in real time, thus providing a healthy and comfortable water environment for your lovely fishes. The clear red and blue display makes it easy to read temperatures no matter in bright and dark..
  • WIDE TEMP RANGE - Temperature Range -58 ℉ ~ +257℉(Fahrenheit).
  • Temperature measurement accuracy: ±1℉ (±0.1℉ when temperature within -9.9~99.9F). It can be not only used in water but also used to measure the air temperature. But the water temperature will be more accurate than that of air..
  • 3 FEET WIRES - With 1 meter long wires, it is flexible to place the 2 sensor probes in aquarium tank, fish tank, reptile terrarium, refrigerator, brooders, vehicle or any other place that requires monitoring of temperature..
Check Stock