Top Nut And Bolt Flaring Tool

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

  • Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
  • ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
Check Stock

Podavelle 6AN Hardline Tube Nut and Sleeve Fitting Adapter for 3/8 Hard Line Aluminum Black 2 sets

  • AN6 (9/16x18 UNF) aluminum tube nut and sleeve assembly, suitable for 3/8" outside diameter hardline / tubing.
  • Package includes two nuts and two sleeves.
  • Manufactured from lightweight 6061-T6 billet aluminum.
  • Anodized finish for strength, durability and anti-corrosion.
  • These AN hardline tube nut and sleeve provide a AN / JIC connection to the end of aluminum tubing.
  • Notice: your hardline tube end will need to be flared at 37 degrees using a flaring tool.
Check Stock

Rivnut Insert Setting Tool Nutsert M4 M5 M6 M8 M10 (M5)

  • ...uality Manual Electric Riveting Nut Tool Is Made Of Chromium Steel, Which Increases The Durability And Strength Of The Tool. The Surface Of The Product Is Treated To Prevent Corrosion And Has A Longer Service Life. The Rivet Nut Gun Is Equipped With A Suitcase To Facilitate Storage And Prevent Loss. The Size Of The Bolt Is Ordinary Hexagon Bolt, Which Can Be Matched Locally After The Bolt Is Worn..
  • 【Wide Application】 The Rivet Nut Kit Provides Customized Fastener Solutions For A Wide Range Of Riveting Applications. The Rivet Tool Set Is Very Suitable For Connecting Various Metal Plates And Pipes, And Can Be Widely Used In The Riveting Of Light Industrial Electrical Products Such As Automobiles, Ladders, Furniture, Decoration, Etc..
  • 【Remarks And Warranty】 We Offer You A 30 Day Refund And Half Year Warranty To Ensure Your Satisfaction. If You Have Any Problems, Please Send Us Your Order Number By Email, And We Will Provide You With Effective Customer Support As Soon As Possible..
Check Stock

Anderson Metals-50066-0604 Brass Tube Fitting Coupling 3/8 Compression x 1/4 Female Pipe

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminium, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

  • 【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
  • 【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
  • 【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
  • 【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
  • 【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....
Check Stock

Anderson Metals 50062-06 50062 Brass Compression Tube Fitting Union 3/8 x 3/8 Tube OD

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Eastwood Professional Brake Line Flaring Tool Kit | 45° Degree Single Double & Bubble Brake Tubing Flares | Use with Hydraulic Hose | Ideal for Stainless Steel Tube or Copper Pipe | Inc 4 Split Dies

  • MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you’ll always get quality reliables results time after time!.
  • HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that th....
Check Stock

Anderson Metals - 50065-04 50065 Brass Compression Tube Fitting 90 Degree Elbow 1/4 x 1/4 Tube OD

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

EWK 13 Pcs Impact Locking Lug Nut & Rounded Bolt Extractor Remover Set

  • 【 Completely Kit 】 EWK lug nut removers all your needs! Bolt and nut extractor set including 13 Pcs most commonly use bolt biter s.
  • 【Versatile Tool 】 This nut socket set easily removes stripped bolts, damaged nuts, rounded screws and frozen lug nuts. Satisfies all your....
  • 【 Wide Applications 】 The universal internal spiral threads design of the bolt extractors fit most types of fasteners. Not only can use the lug....
  • 【 CR-MO Steel】 Made of high hardness CR-MO steel for superior durability. These broken bolt remover sockets have black oxide surface, enables high....
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If....
Check Stock

BOSCH VH1022 10-Feet Replacement 22mm Dust Extractor Hose

  • PROFESSIONAL-- Polished mirror surface, exquisite workmanship. For rusty nuts, you can use these tools to cut them off, then solve the difficult problem of removing, this set nut splitters ensures you have the right tool for the job..
  • PREMIUM QUALITY -- Heavy duty nut splitter designed for the safe removal of corroded or damaged nuts without damaging bolt threads..
  • EASY USE -- Just rotate the nut splitter bolt to work on the target nut. Very easy to use. You may prepare a wrench help you to do this work..
  • APPLICATIONS -- Bearing steel material, high hardness, sharp cutting, anti-rust and long life, perfect for mechanics, steel workers DIY use..
  • COMPLETE SPECIFICATIONS -- The hardened steel chisel is driven by large bolt capacity 9-12mm, 12-16mm, 16-22mm..
Check Stock