Top Nut Tapping Machine

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

  • Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
  • Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Free Shipping.ETA:7-12 days.No Import Duty.1 year....
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

J&R Quality Tools Auto Body Repair Slide Hammer Set 18 Piece Set

  • Includes these attachments: Rubber cover, 6pc Hasp Iron, Cast Iron Hammer, Long Tube, Hex Nut, Circular Nut, Circular Pipe, Tapping Screw, Right Angle Flat Steel, 2pc Hex Standard Component, Connector, Double Barreled Connector.
  • Slide hammer set is constructed with heat treated steel for extra strength and durability for all your pounding and pulling operations.
  • 13 pound slide hammer 24" long, giving you a greater pulling force.
  • Hammer dent removal set can be used in auto body repairs, non-damaging removals of dents and hubcaps.
Check Stock

uxcell Metric Machine Tap M12X1.25mm H2 HSS Uncoated 4 Straight Flutes Thread Tapping DIY Tool 2pcs

  • Thread Size: M12X1.25mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut..
Check Stock

Glarks 120Pcs #8 x 5/8\ Phillips Modified Truss Head Wood Screws, Black Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 5/8" modified truss head wood screws in total. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, black zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

Glarks 120Pcs #8 x 1-1/2\ Phillips Modified Truss Head Wood Screws, Blue Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 1-1/2" modified truss head wood screws. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, blue zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

INTBUYING Pneumatic Air Tapping & Drilling Threading Machine Air Drill Tapper Flexible Arm (M3-M12 Tap Collets Vertical)

  • Tapping Ability of Pneumatic Tapping Machine: steel/aluminum: M3-M12, stainless steel: M3-M8, Range of Rotation: 400rpm(stepless speed regulation), Working radius:39.37"（1.0m）,Working pressure:0.6-0.8Mpa.
  • Pneumatic Tapping Machine: Avoid the limitations of manual tapping, time-saving and labor-saving, no damage to thread, and the tap is not easy to break. Wide range of activities, heavy workpiece do not need to be moved.Smaller gas pressure and gas (5-8Kg / cm2), large torque output..
  • Premium Quality: M3-M12 Pneumatic Air Tapper adopts high strength aluminum alloy, smooth running, low noise, stable performance, simplified operation. Clamping cylinder with overload protection device can avoid tap damage.
  • Applicable Materials: M3-M12 Air Tapper can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
  • Heavier work matter does not need positioning device or mobile, installed plus universal head can easily get.Rapid fast positioning and high cutting speed, increased production capacity..
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock