Top Nvidia Jetson

Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
  • WiKi for reference: wiki.geekworm.com/T300.
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).
Check Stock

2 Pack Dedicated DC 5V-12V Cooling Fan for NVIDIA Jetson Nano Developer Kit 3PIN Reverse-Proof Connector 40mm×40mm×10mm Fan

  • 2 Pack Dedicated Cooling Fan for NVIDIA Jetson Nano Developer Kit.
  • Note: Jetson Nano Developer Kit and Acrylic Case are NOT included..
Check Stock

Geekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
  • for the T300 metal case, refer to ASIN: B07W7CNSR8.
  • for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
  • Intelligent power management - Automatic powering off when system shutdown.
Check Stock

Dedicated DC 5V Cooling Fan for NVIDIA Jetson Nano Developer Kit PWM Speed Adjustment Strong Cooling Air Fan 40mm×40mm×20mm with 4PIN Reverse-Proof Connector

  • Dedicated 5V Cooling Fan for NVIDIA Jetson Nano Developer Kit.
  • With 4PIN reverse-proof connector, easy to connect to the Jetson Nano.
  • With the function of PWM speed adjustment.
  • The package include 1xFan-4020-PWM-5V and 1xScrews pack.
Check Stock

2 Pack Dedicated DC 5V Cooling Fan for NVIDIA Jetson Nano Developer Kit PWM Speed Adjustment Strong Cooling Air Fan 40mm×40mm×20mm with 4PIN Reverse-Proof Connector

  • 2 Pack Dedicated 5V Cooling Fan for NVIDIA Jetson Nano Developer Kit.
  • With 4PIN reverse-proof connector, easy to connect to the Jetson Nano.
  • With the function of PWM speed adjustment.
  • The package include 2xFan-4020-PWM-5V and 2xScrews pack.
Check Stock

Intel AC8265 Wireless NIC Module Wireless-AC8265 for Jetson Nano Developer Kit B01/A02, Support 2.4GHz/5GHz Dual Band WiFi and Bluetooth 4.2,Linux, Windows 10/8.1/8/7

  • Wireless-AC8265 is a dual mode wireless NIC module applicable for NVIDIA Jetson Nano Developer Kit B01/A02.Note:This item does not support Jetson Nano 2GB Developer Kit.
  • Supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2..
Check Stock

Yahboom Jetson Nano Robotic Developer Kit AI Smart Robot for Adults Camera Programmable Electronics Project for 4GB Autopilot Object Tracking Face Color Recognition (Without Jetson Nano 4GB)

  • 【Smart Robot for Adults】Jetbot robot is a DIY multi-function tank AI education robot based on NVIDIA Jetson Nano A02 or B01. Robotic combine with NVIDIA Jetson Nano to truly lower the threshold of artificial intelligence, which make AI interesting more suitable for learning and competition..
  • 【Omnidirectional HD Camera】Jetbot has 3-dimensional camera head, which realizes up and down, left and right, front and rear control of the 800w HD camera, real-time video transmission, and obtains the first perspective of the lens.It is a pair of eyes that can be moved manually..
  • 【Rich Functions and Playing Methods】If the Jetbot robot's autopilot, object tracking, face recognition, color tracking, edge detection, automatic obstacle avoidance, refuse classification and other functions can be fully utilized, your competition is very exciting and your partner will cheer for Jetbot..
  • 【Offers 31 Full Open Source Code】You can implement all the functions of the robot based on the step-by-step course materials provided by Yahboom. However, this is a programmable robotic car customized for teenagers over 18+ or adults. We re....
Check Stock

Arducam IMX477 HQ Camera Board for Jetson, 12.3MP Camera Board Compatible with Nvidia Jetson Nano/Xavier NX, Raspberry Pi cm 3/3+ and cm 4

  • A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P..
  • Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control..
  • Plug-and-Play - You don’t need any hardware modification to work with jetson platform. Just a driver needed. More convenient than RPI official HQ cameras..
  • 4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates..
  • Note：It can't work on the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4)..
Check Stock

AI-HomeGuard (Windows 10/Linux) a Surveillance Software Using Artificial Intelligence Technology and Smart Switches to Protect Your Home and Loved Ones

  • ... a portable device or PC with its web browser..
  • No False Alarm. The advanced Artificial Intelligence can accurately identify people and cars, performing significantly better than leading home security brands at reducing false alarms in daytime, nighttime, rain, or snow. Support hardware-accelerated RTSP decoding via Nvidia GPU for higher camera FPS and lower CPU consumption..
  • Smart Switch Control. It can turn on/off smart plugs (with connected sirens) when an object of interest (person, car, etc.) is detected and meets some conditions, including the originating camera, the kind of object (e.g. a person), the object moving direction, and whether the time is within a schedule..
  • The order contains a software activation key for AiHomeGuard (Windows 10 or Linux) to run on one device, and the instructions to download the package and full documentation. Supported devices: Nvidia Jetson Nano (up to 5 IP cameras) or PC with Windows 10 or Linux (up to 8 ~ 20 cameras). It supports different AI Inference backend to fit your hardware platform: Nvidia GPU native or Intel integrated graphics (e.g. Intel HD 530 in i3 6100 or similar AMD integrated graphics)..
Check Stock

SainSmart XBee USB Adapter for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot

  • This camera module is designed for NVIDIA Jetson Nano Board and Raspberry PI CM3..
  • With 8-megapixel IMX219 sensor and features the fixed focus77-degree field of view. (The drive board is no longer needed.).
  • Support 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording. With the power interface, it also supports 3.3V output power supply..
  • This camera module is widely used for AI intelligent recognition, face recognition, road identification line recognition, license plate recognition,....
  • If you have any questions about the product, please feel free to contact us..
Check Stock

Waveshare Jetson Nano 4GB Development/Expansion Kit Alternative Solution of B01 Kit with Carrier Board Only Compatible with Both Jetson Nano and Jetson Xavier NX

  • The carrier board ONLY, compatible with both Jetson Nano and Jetson Xavier NX.
  • Based on AI computers Jetson Nano and Jetson Xavier NX, providing almost the same IOs, size and thickness as the Jetson Nano Developer Kit (B01), more convenient for upgrading the core module..
  • By utilizing the power of core module, it is qualified for fields like image classification, object detection, segmentation, speech processing etc. and can be used in sorts of AI projects..
  • Compatible With Both Jetson Nano And Jetson Xavier NX.
  • 4K @ 60 | 2x 4K @ 30 | 8x 1080p @ 30 | 18x 720p @ 30 (H.264/H.265).
Check Stock

Dedicated DC 12V Cooling Fan for NVIDIA Jetson Nano Developer Kit 5V-12V Voltage 3PIN Reverse-Proof Connector Silent Working (40mm×40mm×10mm)

  • Dedicated Cooling Fan for NVIDIA Jetson Nano Developer Kit, Silent Working.
Check Stock