Top Nylon Insert Hex Screws

1/4 -20 Nylon Insert Hex Lock Nuts Allen Hex Drive 304 Stainless Steel 18-8 Full Thread Coarse Thread UNC Pack of 25

  • Package: 25 PCS 1/4"-20 Nylon Insert Hex Stainless Locknuts.
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

7-Stainless Steel Batwing Fairing/Windshield Trim Bolt Kit are Replacement/compatible with Harley-Davidson years 1996-2013

  • REPLACEMENT: replace those striped out tork bolts with Stainless Steel HEX BHCS (7).
  • HEX WRENCH: included so you can change them out easily with a more sure grip..
  • NO SPECIAL WRENCH: if you loose the hex wrench you can get then fairly easy. Torx wrenches and not as easily found everywhere..
  • STAINLESS STEEL: Hex Button Head Screws and Washers.
  • BATWING WINDSHIELD FAIRING: Brass Insert Repair Kit-Listing number 0114OGN82NX.
Check Stock

3/8-16 Nylon Insert Hex Lock Nuts Stainless Locknuts, Hex Drive, Bright Finish, 304 Stainless Steel 18-8 SS, Coarse Thread, 25 of Pack

  • Package: 25 PCS 3/8-16 Nylon Insert Hex Stainless Locknuts (Specification described in the pictures).
  • Width From Flat to Flat: 0.551 inch to 0.564 inch.
  • Overall Height: 0.438 inch to 0.468 inch.
  • High Quality Material: Made of Stainless Steel 304 (18-8) which provides good strength and corrosion resistance in bad environments without the need for time consuming and costly maintenance..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

#10-24 (50 PCS) Stainless Steel Hex Locknuts with White Nylon Insert, Stainless Steel 304 (18-8) Lock Nuts, Bright Finish, Full Thread, Hex Drive

  • Package: 50 PCS #10-24 Nylon Insert Hex Stainless Locknuts.
  • Overall Height: 0.157 inch to 0.187 inch.
  • Made of 304 stainless steel (no coating outside) 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

40Pcs Anwenk 1/4\-20 x 15mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment (with Hex Spanner)

  • 40pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture..
  • Size: Internal Thread Insert Type: 1/4"-20, External Diameter: 10.5mm, Total Length: 15mm. (1/4"-20x15mm).
  • Material: High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design..
  • Usage: Pre-drill /drill a well-sized hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use a 6mm internal hex tool to screw in (6mm Hex Spanner Included). Tip: If the furniture wood is with high-hardness, please enlarge the screw hole..
  • Applications:These furniture screws are suitable for furniture hardwood/ solid wood, for furniture combinations..
Check Stock

Portrait of a Garden

  • Everything you need, just supply own poles, electric drill, wire cutters and rivet gun. If you are fixing to masonry/brick walls a masonry drill bit and nylon plugs will be required.
  • Adorn fences & walls with climbing greenery.
  • Heavy duty wire 316 stainless steel - high tension / heavy loading. Unique tensioning system allows re-tensioning if wire becomes slack.
  • Number of Components: Anchors in capsules: 4 Anchor Platforms: 4 Hex head screws: (25mm) 8 Radial Wire Guides: 10 Hex Screws (40mm): 20 Tension Cap: 2 End Cap: 2 Wire in m (spooled) : 30m of 2mm '316' wire.
Check Stock

40Pcs Anwenk 1/4"-20 x 20mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment (with Hex Spanner)

  • Material: High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design..
  • Applications:These furniture screws are suitable for furniture hardwood/ solid wood, for furniture combinations..
  • 40pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture.1/4″-20x20mm screw type. Comes with 6mm Hex Spanner..
  • Usage: Pre-drill /drill a well-sized hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 23mm), then use a proper 6mm internal hex tool to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the screw hole..
  • Size: Internal Thread Insert Type: 1/4″-20, External Diameter: 10.5mm, Total Length: 20mm. (1/4″-20x20mm).
Check Stock

Eagle Tool US Installer Bit and Drill Bit Extension, 36-INCH - ETHX25036

  • NEW Extensions designed to extend not only tree flat cable bits but also any 1/4-inch hex shank drill bit.
  • Internal hex for attaching 1/4 hex shank in drill bits.
  • Custom slip resistant nylon patch set screws.
  • Three flat non-slip grip on the chuck end.
Check Stock

POROHOM 12 PCS Trampoline Screws, Long Screw Trampoline Replacement Parts,Anti-Loose Trampoline Bolts and Nuts,Trampoline Accessories Trampoline Stability Tool- 3 in

  • Application: The trampoline screws are compatible with many different trampoline brands. The installation of long screws on the trampoline can make the trampoline more stable and not easy to shake..
  • Package Includes: 12 x Trampoline Screws, 1 x open wrench. Important note, Nylon lock nuts are used in our trampoline screws kits, and Nylon Lock Nuts Use the matching wrench to tool to screw in..
  • Nylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration..
  • Compared with the bolt heads of other brands of trampoline screws, the square shoulder underneath the rounded head is unique because this design can resist rotation when the nut is removed or tightened..
  • Wide Range Of Uses:The 12-piece bolt and nut set can be widely used in trampolines, cribs, bunk beds, chairs, cabinets, workbenches and other furniture.
  • it can also be well connected to wood, headboards and cabinets..
Check Stock

Toolly 3/8'' Shank 7 Pcs Indexable Carbide Turning Tool Set, Indexable Turning Tool Holder, C6 Carbide Inserts

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
Check Stock

HVAZI Metric M2 M2.5 M3 M4 M5 Nylon Phillips Pan Head Screws Nut Washer Assortment Kit (Black)

  • High Quality 510PCS Metric M2 M2.5 M3 M4 M5 Black PA66 Nylon Phillips Pan Head Screws Hex Nut Flat Washer Assortment Kit.
  • Thread Diameter: M2/(2mm) with Thread pitch: 0.4mm.
  • Screw thread: M2.5/(2.5mm) with Thread pitch: 0.45mm.
  • Screw thread: M3/(3mm) with Thread pitch: 0.5mm.
  • Thread Diameter:M4/(4mm)with Thread pitch: 0.7mm.
  • Thread Diameter:M5/(5mm)with Thread pitch: 0.8mm.
  • The assortment contains:M2x5mm(20PCS),M2x8mm(20PCS),M2 Hex Nut (40PCS),M2 Flat Washer(40PCS).
  • M2.5x6mm(20PCS),M2.5x10mm(20PCS),M2.5 Hex Nut (40PCS),M2.5 Flat Washer(40PCS).
  • M3x6mm(20PCS),M3x10mm(20PCS),M3 Hex Nut (40PCS),M3 Flat Washer(40PCS).
  • M4x8mm(15PCS),M4x10mm(15PCS),M4 Hex Nut (30PCS),M4 Flat Washer(30PCS).
  • M5x10mm(10PCS),M5x20mm(10PCS),M5 Hex Nut (20PCS),M5 Flat Washer(20PCS).
  • All products are made of durable nylon, Strong,anticorrosive.
  • Type specification complete, the quality is reliable,Easy to install and durable to use.
Check Stock

Accusize Industrial Tools 3/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2003

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
  • Details, recommended cutting speeds and specifications are in the description.
Check Stock