Top Od Pipe

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

Westbrass R128-2-62 1/2\ Sure Grip Low Pattern Flange for Copper Pipe (5/8\ OD), 1-Pack, Matte Black

  • Sure Grip Low Pattern Flange for Copper pipe.
  • For mounting to 1/2 in. Copper pipe (5/8 in. OD).
Check Stock

Westbrass R128-2-07 1/2\ Sure Grip Low Pattern Flange for Copper Pipe (5/8\ OD), 1-Pack, Satin Nickel

  • Sure Grip Low Pattern Flange for Copper pipe.
  • For mounting to 1/2 in. Copper pipe (5/8 in. OD).
Check Stock

Speedway Motors Stainless Steel Exhaust Pipe Mandrel Bend, 45 Degree, 2-1/2 Inch

  • Premium heavy-duty T304 stainless steel construction for consistent performance and reliability.
  • Each pipe is expanded on one end to allow easy slip fit installation over another 2-1/2" OD exhaust pipe.
  • This 45 degree mandrel bend is full size throughout the bend to maximize flow and increase horsepower.
  • Build your own custom exhaust systems and headers.
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Rohn 25G Series 30' Basic Tower Kit

  • INCLUDES: (2) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *30' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 20' Basic Tower Kit

  • INCLUDES: (1) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *20' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck

  • Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
  • High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
  • 2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
  • Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Portable, Progress Solar and Wind Powered Light Tower

  • Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 50' Basic Tower Kit - Rohn 25G

  • INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock