Top Oem Flaring Tool

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

  • Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
  • ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

  • 【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
  • 【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
  • 【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
  • 【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
  • 【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instruct....
Check Stock

LIAMTU Tubing Flaring Tools Kit Heavy Duty Steel Swage Tool Set Include Pipe Cutter & Ratchet Wrench

  • ALL INCLUSIVE KIT: LIAMTU tubing flaring tools kit includes all the parts to finish a tubing flaring&swaging work.
  • WIDE RANGE OF APPLICABILITY: this flaring kit can finish 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. tubing flaring work.
  • HIGH HARDNESS MATERIALS: the flaring tool, pipe cutter and ratchet spanner are made of the sturdiest steel materials and chromed finished for easy....
  • SELF-CENTERING YOKE: two bars included covering nine sizes with a self-centering, slip-on forged steel yoke to help form professional and quality....
  • EASY TO CARRY: all parts can be put into a blue color hand carrying plastic case.
Check Stock

ARES 18010 - Universal Hydraulic Flaring Tool Set - Create 45 Degree Single or Double Flares, ISO and DIN Bubble Flares, Push Connect Flares and GM Fuel Line Flares

  • INCLUDES: This Universal Hydraulic Flaring Tool Set includes one hydraulic flaring tool assembly, and all of the dies and adapters you need to create 45° Single or Double Flares, ISO/DIN Bubble Flares, Push-Connect and GM Fuel Line Flares in the following tubing sizes: 45-degree single or double flares in 3/16, 1/4, 5/16, 3/8, & 1/2-inch.
  • ISO/DIN bubble flares in 4.75, 6, 8 & 10mm.
  • Push-Connect type flares in 1/4, 5/16, 3/8, & 1/2-inch.
  • and GM style fuel line flares in 5/16 and 3/8-inch tubing..
  • DESIGN CONSIDERATIONS: This tool is designed to be used on- or off-car with a hydraulic cylinder, so you can create flares as efficiently as possible when and where you need them..
  • APPLICATIONS: This Universal Hydraulic Flaring Tool can be used to create 45-degree Single or Double Flares, ISO/DIN Bubble Flares, Push Connect-Style Flares and GM Fuel Line Flares in a wide variety of materials including steel and soft metal tubing. Whether you’re working on brake lines, transmission cooler lines, or fuel lines, this tool will help you create the flares you need quickly and easily..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES Universal Hydraulic Fla....
Check Stock

LORESO Brake Line Flaring Tool Kit with Swaging Tool Set for 45° Single Flares on Copper Aluminum Brass and Soft Steel Lines Professional Repair and Replacement

  • Professional Flaring and Swaging Tool Kit – A full-service brake line kit with swage tool and other essential accessories this brake line repair kit....
  • Versatile Equipment Compatibility – Our brake line and swage tool kit can be used in copper, aluminum, brass, magnesium, and soft steel lines to....
  • Expanded Sizes to Suit Every Job – This 45° flaring and swaging kit with cones, bars, fittings, tube cutter, and ratchet wrench features sizes....
  • Compact, Portable Storage Case – Each flaring and swage tool set comes with a heavy-duty storage organizer to make it easier to use in a....
  • Trusted Quality, Durability, and Resilience – Here at LORESO we make tools that support rugged jobs and precision craftsmanship which is why every....
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock