Top Oem Heatsink

anidees Aluminum Heat Sinks Extra High Pi Case with Silicone Thermal Pad for Raspberry Pi 4 Model B Black (AI-PI4-BB-PRO-H)

• 【Silent & passive Cooling】 100% Aluminum Alloy material cools the Raspberry Pi as a heatsink and comes with Silicone thermal pads for CPU, SDRAM and USB chip provides excellent heat dissipation..
• 【 High Performance 】 Optional installation for 25/30mm fan provides the best cooling potential to avoid overheating and create the perfect performance for Pi4. Max 1.28in / 32.5mm internal space with spacers..
• 【 WiFi signal strength 】No limitation for WiFi due to Plastic Base.
• Using ABS UL 94V0 specifications material for flame retardance..
• 【Easy Access】- Aluminum casing with cutouts for GPIO / Camera / DSI display cable. Extra space for Pi POE Hat (Need 4/40 pin extra tall Header) and Sense Hat. Obvious lights show the system status..
• 【OEM/ODM Service】anidees is a professional and experienced manufacturer of metal processing, we offer customized service to OEM/ODM which would make your job easier, welcome to contact us for more information..

EKWB EK-M.2 NVMe Heatsink- Black

• Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
• Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
• PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
• PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

• ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
• User manual, refer to Geekworm WiKi search C235..
• ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
• ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
• ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
• ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..

Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)

• The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+.
• It can not work for Raspberry pi zero, because there is no pin header on zero.
• Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm.
• You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan.
• This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..

Advancing Gene M.2 NVMe Heatsink for PS5 Console, Black

• ✅[Customized for PS5 SSD Slot] - This M.2 SSD cover heatsink is specially designed for PS5 console's SSD expansion slot, unique slim tail design will not affect the installation of the PS5 plastic cover. It can perfectly replace the original PS5 SSD expansion slot cover..
• ✅[Premium Material Used] - Made from expensive Aviation Grade Magnesium Aluminum Alloy, anodic oxidation, fine workmanship. It not only has high hardness and light weight, but also has better heat dissipation effect, which is completely different from those cheap PS5 heatsinks. In addition, it is also equipped with extended screw and corresponding screwdriver, stable installation, to ensure that it will not fall off..
• ✅[Optimized Heat Dissipation Design] - Different from other closed designs, we adopted unique surface cooling slot + through-hole design to allow heat from the SSD card slot to dissipate out. With the help of PS5's built-in fan, air circulation can be accelerated to maximize heat dissipation affect..
• ✅[Quick and Easy Installation] - Advancing Gene heatsink for the PS5 console compatible with all kinds of M.2 NVMe SSD and easy to install: >> 1. Use the screwdriver remove the original SSD cover plate of PS5.
• >> 2. Use the extended screw enclosed to fix the new ....

GLOTRENDS M.2 Heatsink with M.2 Thermal Pad for 2280 M.2 PCIe 4.0/3.0 NVMe SSD (2 Packs)

• 2 packs of M.2 heatsink fits for PS5/PC installation. 0.12inch/3mm high m.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
• Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent Rocket 4, Samsung 980 Pro, Samsung 970 Pro, Silicon Power US70, and etc..
• Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation..
• 5°C- 20°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink can extend the life of M.2 PCIe SSD..
• A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low viscosity, thermal conductivity, and insulation..

NVIDIA Jetson AGX Orin Developer Kit

• 【Fully Compatiblility】 This Aluminium Heatsink fully compatible with Jetson Xavier NX Module..
• 【Essential for High-performance Computing】 Keeps module temperatures low to avoid overheating and throttling..
• 【Effective Thermal Management】 Full Aluminum heatsink with fan..
• 【Easy to Install】 Mounting bracket & screws included..
• 【Easy to Carry】 This Aluminium Heatsink has a small size with dimensions: 58mm x 38mm x 18mm..

VRM Heatsink Voltage Regulator Thermal Pad 612F7 0612F7 for DELL XPS 8940, DELL G5 SE 5000 5505, OptiPlex 7080 7090 Desktop Computer Thermal Bracket

• This heatsink bracket only Compatible with DELL XPS 8940 Desktop Special Edition, DELL OptiPlex 7080 Tower, DELL G5 SE 5000 5505 Gaming Desktop Computer. DELL XPS 8940 VRM Heatsink..
• Processor heat sinks are essential to keep your system running at maximum efficiency and minimizing costly downtime and repairs..
• VRM HeatSink is the components that convert your 12V to the voltage your CPU needs..
• Package included: 1x Voltage Regulator Heatsink, 2x screws..

Troglodyte

• Intel LGA 1200 socket: Ready for 11th Gen Intel Core processors.
• Enhanced power solution: 8+1 power stages, 6-layer PCB, ProCool socket, and durable capacitors for stable power delivery.
• Comprehensive cooling: VRM heatsink, flexible M.2 heatsink, PCH heatsink, hybrid fan headers and Fan Xpert 2+.
• Next-gen connectivity: PCIe 4.0, Realtek 2.5Gb Ethernet, Intel Wi-Fi 6, rear USB 3.2 Gen 2, front USB 3.2 Gen 1 Type-C and Thunderbolt 4 support.
• Two-way AI Noise-Cancelation: Reduce background noise from the microphone and audio output for crystal-clear communication in games or video conferences.

DAMOMCO M.2 NVMe PS5 Heatsink - Solid Aluminum Cooler for Playstation 5 SSD NVMe PCIe Console with Thermal Pads,Space Grey

• ...oove and metal texture create a simple industrial style air guide. Diversion heat dissipation, maximize cooling performance and simplify installation..
• 【UPGRADE YOUR CONSOLE】-Whether the upgraded material workmanship or the elaborate design of the structure shape, this heatsink is very unique. This heatsink for PS5 replaces the native PS5 console cover so that the heat doesn't get trapped in the metal cover, and combined with the native fan to achieve better cooling effect..
• 【WIDE COMPATIBILITY】-The PS5 heatsink cooler fits both PS5 Ultra HD and Digital editions. In terms of hardware,It’s compatible with any standard NVMe M.2 solid state drive. Fully tested with WD Black SN850, Samsung 990 980 970 Pro and Rocket NVMe 4.0. It supports 2230, 2242, 2260, 2280 form factor. Please be sure to remove the built-in heatsink before installing our PS5 heatsink..
• 【PACKAGE CONTENTS】 -Comes with an installation guide as well as screws and thermal tape for easy convenient installation..

SABRENT 4TB Rocket 4 Plus NVMe 4.0 Gen4 PCIe M.2 Internal Extreme Performance SSD + M.2 NVMe Heatsink for The PS5 Console (SB-RKT4P-PSHS-4TB)

• DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
• WORLDS FASTEST SSD: The PS5 requires SSD speeds of at least 5500MB/s and our Sabrent Rocket 4 Plus not only achieves this but exceeds it with read and write speeds of 7000MB/s and 6600MB/s respectively..
• REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
• UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
• INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..

Arctic MX-4 2g 4g 8g 20g AMD Intel Processor CPU Cooler Cooling Fan Thermal Grease VGA Compound Heatsink Plaster Paste MX-4 20g