Top Offline Cloning Dock

Inateck USB 3.2 Gen 2 to SATA Adapter Disk Cloning in Software Applicable for 2 x 2.5/3.5 Inch SSDs/HDDs 12V/3A Power Adapter Included

  • Dual SATA Interfaces: Two SATA interfaces allow two 2.5/3.5” SATA SSDs/HDDs to run simultaneously..
  • High-speed Transfer: The new USB 3.2 Gen2 standard significantly improves the performance of SATA interfaces. The transfer rate of a single interface....
  • Fast Read Write Speed: A maximum read/write speed of 6Gbit/s can be delivered when only one interface is in use. The total bandwidth can reach up to....
  • Disk Cloning in Software: You can clone disks with software, making the cloning process more visual than offline cloning to be tracked in real time.....
  • Wide Compatibility: This works with mainstream 2.5"/3.5” SATA drives. Compatible with Windows 10/8/7, Mac OS and Linux..
Check Stock

SABRENT Tool Free USB Type C Dual Docking Station for PCIe NVMe M.2 SSDs with Offline Cloning Function (EC-SSD2)

  • CONVENIENCE: Read from and write to both SSDs simultaneously! Quick-release lid for fast access and 100% tool-less design..
  • DESIGN: Full aluminum construction for maximum heat dissipation. Built-in cooling fan will prevent your disks from throttling due to high temperature..
  • SPEED: USB 3.2 supports data transmission speeds of up to 10Gbps for steady and efficient data transfer. Backward compatible with USB 3.1 and USB 3.0 at respective speed limits..
  • COMPATIBILITY: NVMe M.2 form factor compatible with sizes: 2230/2242/2260/2280. NOT COMPATIBLE with regular M.2 SATA / AHCI SSDs..
  • CLONING: Supports OFFLINE cloning. Clone your drives without using a computer!.
Check Stock

GODO USB 3.0 to Dual Bay External Hard Drive Docking Station with UASP 5Gbps for 2.5 / 3.5 inch SATA HDD SSD, Support Offline Clone/Duplicator Function & 2 x 12TB ,with LED Indicator & Tool-Free

  • GODO Dual bay hdd docking station supports all 2.5”/ 3.5” SATA I/II/III HDD SSD, Support 2×12TB ,Compatible with Windows,Mac Os,Linux..
  • GODO HDD Dock support USB 3.0 UASP acceleration protocol, effectively improve transmission performance. Data transfer rates up to 5Gbps (Write and Read up to 400 MB/s), backward compatible with USB2.0 and 1.1..
  • GODO Online Disk Duplication as external storage, or Offline Clone, one-click to achieve whole disk cloning without connecting a computer. With LED indicator, Hot-swappable, Tool-free..
  • GODO Two-slot USB3.0 clone duplicator support plug and play! No software, drivers or complicated installation required. Built-in power control switch, highly efficient (DC 12V, 2.5A), stable and reliable power source guarantees a steady supply of energy..
  • Package Includes: USB 3.0 HDD SATA Docking Station x1.
Check Stock

ZTUOAUMA 1313-4431 1311-4401 1313-4331 Full Function Handheld Programmer for Curtis Handheld Programmer Electric Forklift Control Programmer Parts

  • Model 1313 enables parameter files to be created and edited online or offline, transferred to another controller for cloning, or saved onto a PC or SD card.
  • The Model 1313 performs comprehensive programming and troubleshooting tasks for all vehicles that use Curtis programmable motor controllers or control systems.
  • Direct access to applicable Curtis motor speed controllers via CANopen network, Fully compatible with Curtis next gen F series and all existing 1313 programmable motor speed controllers.
  • Feature 1: Large high resolution color display shows multiple parameters simultaneously for quick adjustment. Backlight for easy viewing in low-light environments. Cloning feature and 64 Mb internal memory allows multiple parameter files to be stored in the Handheld Programmer making it easy to transfer settings to other vehicles..
  • Feature 2: brand new diagnostic tool for excavator replacement parts, AA Battery compartment allows programs to be edited without having to be connected to a system.M ultiple language support includes English, German, Spanish, French, and Italian..
Check Stock

GODO USB 3.0 to SATA III Mini Dual Bay External Hard Drive Docking Station for 2.5 / 3.5 inch HDD SSD, Support Offline Clone, Hot Pluggable,UASP (5 Gbps) and Max 2x12TB ,for Windows, Mac OS and Linux

  • High Compatibility:GODO two-slot hard drive dokcking station supports all 2.5”/ 3.5” SATA I/ II / III HDD SSD drives (up to 2 x 12TB).The product is compatible with almost all kinds of 2.5” and 3.5” HDDs and SSDs on the market. Compatible with Windows, Mac OS, Linux and Android..
  • Offline Cloning : The docking station can operate offline cloning independent from a computer. One touch to backup and duplicate. LED indicator light shows power and activity status. Support plug and play & hot swap. On/Off power switch for hard drives protection..
  • 5 Gbps SuperSpeed with UASP: The maximum data transfer speed of the USB 3.0 interface is 5Gbps. Transfer 1GB files in 3 seconds, saving up the loading time to do more. With UASP accelerated transmission protocol, making it 70% faster than conventional USB 3.0 when connected to a computer that also supports UASP. Backward compatible with USB 2.0 and USB 1.1 ports..
  • Multi Use & Portability:Mini Compact Design, save more space and easy to carry. Highly efficient 12V / 2.5A power supply makes sure a stable and reliable energy supply.It can be used on laptop, desktop PC and TV.
  • What you will get: 1x GODO USB 3.0 Dual Bay Docking Station,1 x USB 3.0 Cable, 1x Power Adapter 12V/2.5A,1x User Manual.
Check Stock

Inateck Type C SATA Hard Drive Docking Station USB 3.0 SSD Docking Station,Dual Bay,FD2002C

  • Type C Docking Station: Equipped with USB Type C port. Compatible with USB3.1 gen1, USB3.0, USB2.0. A 1 meter USB C-C cable is packaged with a....
  • Dual-Bay Lightning Transfer: Dual SATA III ports provide 2 hard drives with a bandwidth of 6 Gbps. Widely compatible with various 2.5” and 3.5”....
  • Offline Cloning: Supports offline data copy between two hard drives with no computer involved. A competent assistant for data backup. Tool-free, no....
  • Sufficient Power Supply: Packaged with a 12V 3A power adapter to guarantee enough power supply for dual 10TB hard drives and large-capacity data....
  • Auto-sleep mode: Enters sleep mode after lying idle for 30 minutes to save energy consumption and lengthen hard drive’s life..
Check Stock

Tccmebius USB 3.0 Dual Bay External Hard Drive Docking Station with USB 3.0 Hub and Read Carder, for 2.5 3.5 Inch SATA HDD SSD, Support UASP, Offline Clone, Automatic Sleep Functions (TCC-S866-US)

  • Data Transfer: Easy transfer of data from your storage devices to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Support UASP(USB Attached SCSI Protocol), SATA III compatibility support 6 Gbps transfer speeds! NOTE: UASP requires UASP capable host system..
  • Offline Clone Function: Without connecting to a computer, all the data in A-disk is directly copied to B-disk (A-disk must be smaller than B-disk). Since the data before the B-disk is all cleared after the copy is completed, we recommend that all the data on the B-disk be backed up to a computer or other storage device before performing the offline cloning operation. Note: When connected to a computer, hard drive cloning cannot be performed..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
Check Stock

Inateck RGB SATA to USB 3.0 Hard Drive Docking Station with Offline Clone, for 2.5 and 3.5 Inch HDDs and SSDs, UASP Supported, Black SA02003

  • RGB Effect Available: The RGB LED flashes quickly when there is a hard drive working in the docking station. It enters breathing mode when the hard drive is under sleep status or gets removed..
  • Offline Clone: The docking station can operate offline cloning independent from a computer..
  • Fast Transfer Speed: Besides USB 3.0 super speed, the docking station supports UASP, which provides even faster data transfer..
  • Wide Compatibility: Support up to 2 x 10TB hard drives. The product is compatible with almost all kinds of 2.5” and 3.5” HDDs and SSDs on the market..
  • Package List: 1 x Inateck SA02003 docking station, 1 x instruction manual, 1 x 12V/3A Power Adapter, 1 x USB 3.0 Data Cable..
Check Stock

StarTech.com Standalone Hard Drive Duplicator, Dual Bay HDD/SSD Cloner/Copier, USB 3.1 (10Gbps) to SATA III HDD/SSD Docking Station, Hard Disk Duplicator Dock, Hard Drive Cloner (SDOCK2U313R)

  • DUPLICATE AND DOCK SATA DRIVES: This dual bay hard drive duplicator features standalone drive cloning of 2.5/3.5" SATA drives with no computer required. This dock can also be used as a USB to SATA adapter for quick access to your SATA drives over USB.
  • DRIVE COMPATIBILITY: Works with 2.5/3.5" SATA HDDS and SSDs of any capacity | 4Kn Compatible | OS Independent | Backwards compatible w/ SATA I/II | Includes 3ft USB-C/A cables and Universal Power Adapter | IDE adapter (SAT2IDEADP) sold separately.
  • DUPLICATION MODE: Standalone sector-by-sector duplication works with any file format and copies the entire drive, including empty sectors, at speeds up to 28 GB/min. Target disk must be equal/larger than the source disk.
  • SPECS: 2-Bay Duplicator Dock with TRIM | SATA III (6 Gbps) | USB 3.2 Gen 2 (10 Gbps) Host Connection (optional)| Tool-less/Tray-less Design | Top-Loading (Toaster style) w/ Drive Doors & Eject Buttons | Power & Status Multi-function LEDs.
  • THE IT PRO'S CHOICE: Designed and built for IT Professionals, this hard drive duplicator dock is backed for 2 years, including free lifetime 24/5 multilingual technical assistance.
Check Stock

Olivia's Cloning Gel - 2 oz

  • INDUSTRY MADE CLONING MACHINE using popular 2 INCH CLONE COLLARS: not hand-made DIY thing. All engineering reliable parts, SOLD THOUSANDS WORLDWIDE SINCE 2016 WITHOUT MAJOR QUALITY ISSUE!!!.
  • AEROPONIC PROPAGATOR CLONING SYSTEM using popular 2 INCH NEOPRENE COLLARS: Root your cuttings in 4-10 days and consistent 100% success rate one clone after clone. Relax and wait HortiPots Cloning Machine gives you the easiest cloning experience ever. With easy to follow assembly guide and clone tips to make cloning a simple operation.
  • FREE PROPAGATION DOME INCLUDED: Our plant cloning system comes with all parts needed including special-made foldable clear humidity dome (FREE) preventing leaf transpiration and initial transplant shock in the first few hours of cloning, especially in dry growing environment.
  • WORKS GREAT WITHOUT AIR PUMP: Multiple cords outlets and air venting/ circulating design on top lid needs no air pumping to get extra oxygen in and hot air out of growing chamber while patent pending spray manifold requires smaller water pump and generate less heat in water.
  • NO CLOGGING & NO WATER LEAKING : Our cloning machine pump is not only UL-listed for safety use, but also a quality water pump with pre-filter housing to keep cloner sprayers free from debris an....
Check Stock

Aeroponic Cloner Machine, Cloning Machine 35 Site for Cutting Rooting Germination Kit Using 1.625 inch Neoprene Clone Inserts

  • INDUSTRY MADE CLONING MACHINE: not hand-made DIY thing. All engineering reliable parts, SOLD THOUSANDS WORLDWIDE SINCE 2016 WITHOUT MAJOR QUALITY ISSUE!!!.
  • AEROPONIC PROPAGATOR CLONING SYSTEM: Root your cuttings in 4-10 days and consistent 100% success rate one clone after clone. Relax and wait HortiPots Cloning Machine gives you the easiest cloning experience ever. With easy to follow assembly guide and clone tips to make cloning a simple operation.
  • FREE PROPAGATION DOME INCLUDED: Our plant cloning system comes with all parts needed including special-made foldable clear humidity dome (free) preventing leaf transpiration and initial transplant shock in the first few hours of cloning, especially in dry growing environment..
  • WORKS GREAT WITHOUT AIR PUMP: Multiple cords outlets and air venting/ circulating design on top lid needs no air pumping to get extra oxygen in and hot air out of growing chamber while patent pending spray manifold requires smaller water pump and generate less heat in water.
  • NO CLOGGING & NO WATER LEAKING : Our cloning machine pump is not only UL-listed for safety use, but also a quality water pump with pre-filter housing to keep cloner sprayers free from debris and preventing clogging when cloning aeroponically.
Check Stock

HORTIPOTS Aeroponic Cloner Machine 24 Site for Cuttings Rooting Using 2 inch Neoprene Inserts or 2 inch Clone Collars

  • INDUSTRY MADE CLONING MACHINE using popular 2 INCH CLONE COLLARS: not hand-made DIY thing. All engineering reliable parts, SOLD THOUSANDS WORLDWIDE SINCE 2016 WITHOUT MAJOR QUALITY ISSUE!!!.
  • AEROPONIC PROPAGATOR CLONING SYSTEM using popular 2 INCH NEOPRENE COLLARS: Root your cuttings in 4-10 days and consistent 100% success rate one clone after clone. Relax and wait HortiPots Cloning Machine gives you the easiest cloning experience ever. With easy to follow assembly guide and clone tips to make cloning a simple operation.
  • FREE PROPAGATION DOME INCLUDED: Our plant cloning system comes with all parts needed including special-made foldable clear humidity dome (FREE) preventing leaf transpiration and initial transplant shock in the first few hours of cloning, especially in dry growing environment.
  • WORKS GREAT WITHOUT AIR PUMP: Multiple cords outlets and air venting/ circulating design on top lid needs no air pumping to get extra oxygen in and hot air out of growing chamber while patent pending spray manifold requires smaller water pump and generate less heat in water.
Check Stock