Top Offset Bend
Lazer Sharp Eagle Claw Lazer Worm Round Bend Hook Brown One Size L091GH-2/0
- Highest quality angler gear for all types of fishers.
- Round Bend, Forged Point, Non-Offset, 90 Degree Leg, Jig Hook, Barbed.
- Multi Species Hook made for Freshwater and Saltwater use.
- Classic 570 Eagle Claw Fishing Jig Hooks.
Check StockBeneCane Walking Cane Adjustable Cane with Offset Soft Cushioned Handle for Men & Women Lightweight Comfortable Extra Stability Base Mobility Aid for Men Women and Seniors Pink
- Lightweight and super sturdy:The cane made of super light aluminum,but it's super sturdy.The wall thickness of the tube is 1.5 times that of other....
- Stays upright and more stability:The cane stays upright at all times so need not to struggle to bend down to pick it up,it does give you more....
- The silver button:You need to hold down the lower tube to pull the adjustment button out when you received the product.When the silver button is....
- Adjustable to Fit Your Needs:A simple push of a button allows you to adjust the height anywhere you want it from 31" to 36",suitable for most people....
- Cushioned Offset Handle:This comfortable cane features a soft foam grip that reduces pressure and wrist strap provides comfort and security. An Offset....
Check StockBackEZ Back-Saving Tool Handle Attachment, Labor-Saving Ergonomic Shovel or Rake Handle, Add-on Universal Fitting Grip, Quick Installation, RED
- EVR-GRIP BACK SAVER can be added to any long handle stick tool in 1 minute. NEW Upgrade rubber strip holds tight. BackEZ offset handle design keeps you standing taller and reduces back bend by 30%..
- UNIVERSAL FIT Super Tool plastic add-on offset handle. You can now use your entire upper body + core and legs for shoveling, raking, and lifting..
- INCREASE MUSCLE POWER by griping a tool higher on the shaft and stand up straighter. Switch your grip left to right for more balance. Shovel, Rake, Sweep and Garden with less effort!.
- WORK SMARTER NOT HARDER and dramatically reduce physical effort, blisters, backache and hand fatigue. Place grip anywhere on the tool handle that is comfortable for your size + range of motion..
- ERGONOMIC EVR-GRIP DESIGN increases your working leverage and muscle efficiency.
- helps you work more productively with up to 15% less compression in the lower back..
Check StockTriple Album Collection Vol 2
- 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
- Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
- Easy handling aluminum head is reinforced for added strength.
- Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
- Wide foot pedal provides excellent stability, leverage, and comfort.
- Interior hook surface prevents conduit from rolling or twisting during bends.
- Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
- Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check StockSpeedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers
- Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
- Each tube is expanded on one end to allow easy slip fit installation.
- 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
- Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
- Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check StockOEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel
- BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
- Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
- Tubing benders can make left, right, and offset bends up to 90-degree angles.
- DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
- Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
- MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
- Safe soft copper tubing bender and metal tubing bender for any brake line kit.
- Excellent tubing pliers for mild steel pipes and tubes.
- HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
- Sturdy manual tubing bender makes the job much easier.
- BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
- Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
- Left, Right, and Offset Bends Up to 90-degree Angles.
Check StockSpeedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers
- Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
- Each tube is expanded on one end to allow easy slip fit installation.
- 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
- Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
- Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check StockKlein 56206 Conduit Bender with Handle, 1/2'
- 3/4-Inch assembled Aluminum Bender includes Kleins unique Angle Setter technology for time-saving, repeated accurate bends.
- Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
- Easy handling aluminum head is reinforced for added strength.
- Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
- Wide foot pedal provides excellent stability, leverage, and comfort.
- Interior hook surface prevents conduit from rolling or twisting during bends.
- Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset multipliers.
- Compatible with Kleins 3/4-Inch Angle Setter (Cat. No. 51612) creates a hard stop for quick, accurate, and consistent bends.
Check StockKason 1094 SureClose Hydraulic Door Closer, Exposed with Flush to 3/4 Inch Hook, 11094000003_11094000026
- Powerful gas-loaded hydraulic cylinder guarantees controlled closure.
- Exposed mounting model with adjustable wide hook in flush to 3/4 inch offset.
- Model Numbers 11094000003 and 11094000026.
- Solid steel enclosed housing and bend-resistant hook assure long wear in heavy use.
- Extra-wide hook ensures roller pick-up and overcomes alignment problems.
- mounting slots on hook allow for easy adjustment to compensate for door sag, keeping roller aligned with hook for proper function.
- Life-cycle tested to operate reliably even after a half-million closures.
Check StockKason 1094 SureClose Hydraulic Door Closer and Hook, Exposed Mounting, Adjustable Wide-Hook, 1-1/8 Inch Offset
- Powerful gas-loaded hydraulic cylinder guarantees controlled closure.
- Exposed mounting model with wide hook in 1-1/8 inch offset.
- Solid steel enclosed housing and bend-resistant hook assure long wear in heavy use.
- Extra-wide hook ensures roller pick-up and overcomes alignment problems.
- mounting slots on hook allow for easy adjustment to compensate for door sag, keeping roller aligned with hook for proper function.
- Life-cycle tested to operate reliably even after a half-million closures.
Check StockParachase Large Long Umbrella Rain Men Women Wooden Handle Double Layer Windproof Japanese Umbrella 8K Paraguas Big Umbrellas (Khaki)
- Double layer windproof umbrella design, reduce the wind's resistance to the umbrella..
- Made of flexible high-purity, low-alkali ribs that can be bent over 120°, using the bend-ability of the structure to offset the wind..
- High-strength reinforced material for improved robustness and no rust..
- Double hooked full-fiber windproof ribs, flexible support, more tough surface and strong.
- Exquisite vintage bronze material as umbrella buckle, double layer umbrella fabric with 2 buckles..
Check StockRIDGID 36117 403 Instrument Bender, 3/16-inch Tube Bender for Bends Up to 180 Degrees, Pipe Bender,Black/Silver,Small
- Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06 inches (1.5 mm) to a maximum of 180 degrees.
- Made with offset cushion grip handles for improved comfort when forming 180-degree bends.
- A 90-degree start angle and unique oil-absorbing shoe minimizes bending effort while forming accurate bends.
- Features measurements in both inches and millimeters.
- Tube bender has a 3/16-inch tube size outside diameter capacity and 5/8-inch bend radius.
Check Stock