Top Oil And Gas Shim

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes -Set of 8

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (2) 1/32 Rubber Shim, (2) 1/16 Rubber Shim, (2) 1/8 Rubber Shim, (2) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

EFI Fuel Injected Motorcycle Gas Tank Frisco Mount Shallow Tunnel 2.5 Gal Sportster Bobber Style Harley Davidson Nightster Iron Low Forty Eight SuperLow Chopper Custom XL 883 1200 XL883 XL1200 07-2020

  • Excellent Quality ( Not Made in China ) New Motorcycle Gas Tank Frisco Tunnel EFI Fuel Injected Harley Sportster 2007 to 2020 XL 883 1200 XL883 XL1200.
  • Frisco tunnel Utilizes stock fuel pump and Stock fuel cap, Rear of tank reduced 1” from stock.
  • 2.5 gal capacity / 15" long x 9.25" wide x 7.75" tall low shallow Frisco tunnel.
  • Thanks for Looking at our Quality items, Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • The Frisco style gas tank is a throwback to sixties show bikes. Sportster tank is a direct bolt on for 2007 and up Sportsters which use electronic fuel injection (EFI). The custom tank will use the stock fuel pump and gas cap and is a direct bolt on part. No drilling, welding or fabrication of mounting points is required. The notorious flat spot removed from the top of the tank. This is a Frisco mount tank so it will sit high up on the back.
Check Stock

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

KS E20 Bicycle Dropper Seatpost - 30.9 425/125mm - C228-125-30.9

  • Material: bicycle Seatpost Shim is made of high quality 6061 aluminum alloy, CNC machining CD texture surface ,anti-rust and durable.
  • Feature:Use this bike post shim, 30.9 ID Seat Post shim can be converted to 31.6 bike seat post, bike seatpost shim can help you change the bicycle....
  • Size: 31.6 to 30.9 seatpost shims. Length: 100mm..
  • Tips: Please check your bike frame seat tube outside diameter. Measure the inside diameter of your old clamp. Or measure the outside diameter of your....
  • Application: Bicycle Seatpost reducer matches well with most bicycles, such as MTB ,BMX ,mountain bike, road bike,and more, you can easily adjust the....
Check Stock

6 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 12 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness,Brass Sheet Metal Shims

  • ✔ If you happen to need some brass shim stock, you do not have to drive mile to hardware store to find these, our brass shim stock assortment with 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ Brass flat strip is made of brass material,has nice bend-ability and good processability, excellent conductivity, you can use it according to your requirement..
  • ✔ Brass strip has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
  • ✔ Brass shim stock assortment size: 12" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness. Nicely polished up..
  • ✔ Brass shim stock widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock

Pennzoil 550045208 Motor Oil, 5W-30, 5 Qts. - Quantity 3

  • Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology.
  • Designed for for vehicles with over 75,000 miles.
  • Pennzoil Platinum High Mileage 5W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results).
  • No other leading high mileage motor oil provides better protection from friction (Based on Sequence IVA wear test using SAE 5W-30).
  • Formulated to deliver less oil burn off than high mileage motor oils made from crude oil.
  • Helps protect engines from loss of horsepower.
  • Single 5-quart bottle with ergonomic design for easy handling and pouring.
  • Provides faster low-temperature oil flow and protects in extreme heat.
  • Pennzoil is the first motor oil made from natural gas, not crude—PurePlus Technology converts pure natural gas into high-quality, full-synthetic base oil that's crystal clear and contains fewer impurities than other traditional and synthetic motor oils.
Check Stock

Arette Organic Tea Seed Oil (USDA Certified) Extra Virgin, No Flavor, Extra Light, Cold Pressed 17 Ounces (500 Milliliter)

  • Bring home the delicious flavors of Master Shim's cooking. All of our products are created using her 50 years of cooking experience..
  • This fragrant cooking oil is made with soybeans along with spring onion, garlic, ginger, sesame leaves and green peppers..
  • Adds delicious flavor to all kinds of sauces, stir-fried dishes, cold dishes and deep-fried dishes..
Check Stock

KP KOOL PRODUCTS Gas Can Spout Replacement with Extension Spout - Gas can Nozzle - Gas can Vent kit & Gasket Filters - Used for Old 5 Gallon Gas can spout - Blitz - Midwest - Scepter and Other Brands

  • ...TY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage.
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just need a simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • Please remember put the rubber gast under the gas can spout kit cap to avoid the gas leakage .QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock