Top Oil Change Pump

CoCoyes Colinea Oil Change Pump Extractor 12v 80w Marine Oil Change Pump and Electric Oil Pump Great Choice for Oil Changes in Car Ship Truck Motorcycle grey

  • [Quick Oil Change Pump]The oil pump extractor is an ideal device for quick and clean oil changes. DC 12V 80W has enough power, you only need to clamp....
  • [Handle Portable Oil Pump] Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice. The....
  • [Easy To Use]The red clip is connected to the car battery ''+'', the black clip is connected to the car battery ''-'', tighten the hose clamp to....
  • [Multiple Uses]Professional oil suction pump can change motor oil and diesel for ships, cars, motorcycles, trucks, RV, ATV and other vehicles (such as....
  • [Clean and Tidy]An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent....
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • ...ecking of the liquid balance.Oil transfer pump has a capacity of 200cc..
  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [WIDE APPLICATION]VICRING Oil extractor pump great for extracting or changing engine oils or lubricants in boats, farm equipmen....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • ...s: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut-off valve for mess-free extraction. More importantly, the fluid extractor's lid is removable to allow for easy recycling of waste fluid..
Check Stock

TOPEMAI 12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump for Auto Car Boat Motorbike Truck RV ATV Jet with Hose - Engine Oil Change Pump,ATV Oil Change Pump

  • 12V 60W Oil Extractor Pump ideal for Motorcycles,Vans,Cars,Quads,Truck,Boat,Forklift,Generator,Tractor,Scooter and Other Vehicles. Quick extract oil....
  • Oil Diese extractor pump's Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that you can do at home.High....
  • This 12V Oil Transfer Pump High Flow Rate: 3L/min flow rate for engine oil, 4L/m for diesel.12V Oil Transfer Pump AKA Oil Transfer Pump 12V,Oil Change....
  • This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just need to place the inlet/outlet hoses at the....
  • Note: Our pumps are designed to be a little workhorse. As with all 12V pumps however, we recommend a short break after 10 minutes continuous usage....
Check Stock

ELEAD 500cc Oil Extractor Pump, Oil Transfer Pump, Fluid Extractor, Fluid Syringe Extractor, Car Vacuum Fuel Transfer, Siphon Pump for Gasoline Hand Cleaner for auto Mechanics

  • [Easy to Use Oil Transfer Pump ] Insert the hose into the adapter,can be locked,press the black button to easily remover the hose. extended syringe hose helps draw or inject liquid easily..
  • [The Packaging of Oil Pump ] Oil Change Pump with exquisite color box , bring you high-end beautiful visual experience, can also be as a gift..
Check Stock

Genew Oil Change Pump Extractor 12V 80W Diesel Fluid Oil Quick Extract Transfer Pump Scavenge Suction Kit for Car Boat Motorbike Truck RV ATV and Other Vehicles

  • NEW SMALL PUMPS - portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used....
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you....
  • SAFE & SIMPLE OPERATION - Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use,....
  • HIGH-Current ALLIGATOR: Fully surrounded handle, effectively preventing leakage or short circuit. This clip is made of pure copper with good....
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP- The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift,....
Check Stock

Mxmoonant 12V Oil Transfer Pump, 3.2GPM Self Priming Oil Change Extractor Pump, Fuel Transfer Pump with Hoses for Diesel Kerosene Marine Boat Truck

  • ...limited space. The port diameter is 3/8’’ (10mm), which can meet most of the hoses on the market. Of course, if you don’t have the right accessories for a while, we also include a one-meter black oil hose and two fixing clips, which can help you transport in time and bring you a better experience..
  • [TRANSFER & CHANGE] This oil change pump has a vacuum self-suction function, which is generally used in the liquid replacement and transfer of large trucks, engineering vehicles, harvesters and small refueling equipment, including diesel, engine oil, lubricating oil, kerosene and other high-viscosity oily liquids.【Tip】Except gasoline petroleum fuel..
  • [OVERHEAT PROTECTION] This oil transfer pump has a built-in overheating protector. And if there is an abnormality such as overheating and overload, it will automatically shut down to prevent the machine from damaging.【Tip】Designed for intermittent use only. Single use time is recommended in about an hour, and it can be operated continuously after the cooling stops for 20 minutes..
  • [HIGH QUALITY] This 12V, 3.2GPM oil pump is certified by CE EU, and the pump body is made of all-copper and equipped with high-quality copper winding rotors, which is durable and lasting. There is no doubt that this p....
Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

  • 【Widely Used】Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawn mowers and various machinery to change the oil.The DC oil pump adopts the vane pump working mode..
  • Diesel or heating oil: approx 6.0-7.0L/min.
  • Motor oil(40-60℃)：approx 0.8-1.0L/min.Measurements:3.3*5.1*4.9in,Weight:1.87pounds,Maximum delivery Height:0.7m..
  • 【Working Principle】When the oil well pump rotor rotates, the blades on the rotor are closely attached to inner surface of stator under the action of centrifugal force and oil pressure, so that the 2 blades are formed by inner surface of rotor and stator. The working volume of pump is first to absorb oil from small to large, and then to discharge oil from large to small after absorbing oil. Within one rotation of blade, oil absorption and discharge are completed twice. This cycle continues..
  • 【Package Include】The pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative pol....
Check Stock

OEMTOOLS 24938 9.5L Pneumatic/Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
  • Manually suction fluid with the engine oil pump's oversized handle.
  • Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • The built-in shutoff prevents overfilling the extractor pump reservoir.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.
Check Stock

Upgrade 80W 12V Oil Change Pump Extractor, Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kit for Car, Jet Ski, Truck, RV, Camper, ATV, Boat, Motorbike, Riding Mowe

  • ... the arrow Install the hose, Inlet Hose is thin, Outlet Hose is thick.
  • [Safe Operation]: To pump oil properly, before use, please heat the car engine to 104°F-140 °F (40℃-60℃) for about 15 minutes to prevent the oil from solidifying and blocking. Tips: it is NOT suitable for gasoline. Do not use this fluid oil change pump to extract water, gearbox oil, or easily flammable liquids (fuel, petrol, etc)..
  • [Application] This oil transfer pump can change engine oil and diesel for cars, boats, motorbikes, trucks, RV and ATV, and other 12V vehicles..
  • [What you get]: Package included: 1 x Pump.
  • 2 x Battery Clamps. Service warranty: 12month warranty and friendly customer service. Please contact us via email if has any question..
Check Stock

Upgraded 80W Oil Change Pump Extractor SICOTOOL 12v Diesel Fluid Scavenge Suction Oil Transfer Pump with Hose for Car Boat Motorbike Truck ATV and Other Vehicles.

  • 【Portable 80w Oil Extractor Pump】: Lightweight and portable oil pumps bring a lot of convenience for you. Ideal oil pump for oil change.12V 80W....
  • 【Built in Over Current Protection】：Our this upgraded pump built-in overcurrent protection mode ,which can help to maintain the stable operation....
  • 【Easy to use】: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and....
  • 【Safe Operation】:To pump oil properly, before use,please heat up car engine to 104°F-140 °F (40℃-60℃) about 15 minutes in order to prevent....
  • 【What you get】:Package included: 1 x Pump.
  • 2 x Battery Clamps. Service warranty: 12month....
Check Stock