Top Oil Fitting

Brass Barb T Fittings LIONMAX 3 Way Union Barb Tee Fitting 3/16 x 3/16 x 3/16 ID Hose Barb 3 PCS for Water/Fuel/Air

  • 【SOLID BRASS MATERIAL】3/16'' × 3/16'' × 3/16'' ID Hose barb tee fitting is made of brass. Strong and durable, not easy to rust and corrode. NOTE: Brass barb tee fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Brass barb 3 way union fitting has strong temperature resistance and good pressure resistance. So barb T fitting is often used for water, fuel, oil delivery..
  • 【SPECIFICATION】3/16'' ID Hose barb tee fitting is suitable for 3/16 inch ID hose. The package contains brass barb tee 3 PCS..
  • 【WIDE APPLICATION】Barb tee is suitable for pipe repair. Various hoses can be connected to this 3/16 inch ID hose barb tee fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This hose barbed T fitting is smooth overall without burrs. Size meets the standard. The strong barb make the 3 way union fitting not easy to leak during the connection process..
Check Stock

Vincos Black Polish Baffled Universal Aluminum Oil Catch Can Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit 3/8' 9/16' 400ml

  • ✔ 【BILLET AEROSPACE 6061 ALUMINUM】Made of High Quality Aluminum for Enhanced Strength and Durability.Recommend this mod to anyone who really cars about long term performance..
  • ✔ 【INCREASES HORSEPOWER & PRESERVE ENGINE LIFE & KEEP ENGINE CLEAN】This oil catch tank catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine.The catch can will keep out the dirt and oil get inside your engine from your intake system. To keep engine clean , Increases horsepower and Preserve Engine Life.
  • ✔ 【PREVENTS OIL LEAKAGE】Fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage..
  • ✔ 【REUSABLE & EASY TO CLEAN】you can actually clean the catch can very easily even without dismounting it, you just need to unscrew the bottom part of the reservoir and you have complete access to clean everything..
  • ✔ 【Accessory】9mm & 15mm Fitting / size 4.25" high x 2.25" diameter , 9MM and 15MM fitting will work with any car.
Check Stock

OGGI Cooking Grease Container, 4 Quart, Stainless Steel

  • LARGE CAPACITY COOKING OIL CONTAINER - Holds up to 1 Gall / 4 Qt / 3.75 Lt. Easy oil strainer and storage..
  • STRAINER INSERT - Fine mesh strains particles including bacon fat to ensure used oil is reusable..
  • CLAMP ON LID - Secure oil and bacon fat container with tight fitting clamp on lid keeps oil fresh & clean..
  • STURDY CONSTRUCTION - This oil strainer and container is made from robust stainless steel..
  • SLEEK AND STYLISH - Looks great on kitchen counter. Blends in with stainless or black appliances..
Check Stock

YANGCAN Compatible with Oil Pan Restrictor Baffle Plate Fit For A3 A4 A6 TT VW BEETLE J-TTA GOLF PASSAT POLO SHARAN TOURAN 1.8T 2.0 06B103623B (C)

  • Application：For Saab Volvo Opel TD04L TD04H TD04HL Turbos.
  • This oil fitting fits M12 x1.25 thread with 1.5mm Restrictor.
  • Oil Fitting has built in Restrictor to supply proper oil pressure for the turbo which is critical for normal Turbo operation..
  • Appropriate for ball bearing or non-ball bearing turbo use..
Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

Robinair 15800 VacuMaster Economy Vacuum Pump - 2-Stage, 8 CFM, CHROME

  • Robinair's VacuMaster Economy Vacuum Pump is designed for commercial refrigeration use and features a 2-Stage rotary vane design, 18.6 ounce oil capacity, and non-skid feet.
  • 115V, 60 Hz. Better access when refilling oil.
  • Features an inlet fitting engineered for maximum airflow while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping pump cooler and extending life.Cord length:72 inch.
  • 1/4 & 3/8 inch MFL inlet fittings, easy to read sight glass, easy access oil fill port, and oil drain valve positioned at the bottom of the oil reservoir and angled for faster, more complete draining.
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Robinair (15300) VacuMaster Economy Vacuum Pump - 2-Stage, 3 CFM

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service, featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 and 3/8 inch MFL inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

Robinair (15150) VacuMaster Economy Vacuum Pump - 2-Stage, 1.5 CFM

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.4 ounce oil capacity, and non-skid feet.
  • 1/4 HP, 115V/60Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock