Top Oil For Harley Davidson Twin Cam

Accel 2418 Spark Plugs (Pair) 6R12 for Harley Davidson Twin Cam

  • Accel High Performance spark plugs for Harley-Davidson.
  • Suitable for all Harley Davidson Twin Cam 1450/1550cc models from 1999 up.
  • Spark plugs produce a larger spark for more power at high RPMs. Improves throttle response and fuel economy with less fouling.
  • Accel number 2418, replaces OEM part 6R12.
Check Stock

MaximaHiflofiltro VTTOCK14 Complete Engine Oil Change Kit for V-Twin Full Synthetic Harley Davidson Twin Cam, 6 Quart

  • Fits: Harley Davidson All Twin Cam Motorcycles (Electra Glide/Ultra, Street Glide, Road King, Softail, Dyna FLH/FLT/FXD/FXST/FLST) 2000-2015.
  • The V-Twin Complete Engine Oil Change Kit includes 4 Quarts of Maxima V-Twin Full Synthetic 20w50 Engine Oil, 1 Quart (32 oz.) Maxima V-Twin Primary Oil, 1 Quart Maxima V-Twin 85w140 Transmission Oil, and a Black HiFloFiltro HF171BRC Premium Oil Filter.
  • Maxima V-Twin Full Synthetic is an ester based full synthetic motorcycle oil engineered to lower operating temperatures, reduce wear, increase film strength and offer extended protection.
  • Maxima V-Twin Heavy-Duty Transmission & Gear Oil is a high-quality, mineral based motorcycle gear oil, the Primary Fluid is a high-quality, mineral based motorcycle gear oil formulated for high-performance transmissions and primary chaincases.
  • Hiflofiltro RC Oil Filters are made using the worlds highest quality materials, with test results proving a 28% longer service life than OE and competitor brands, and feature a 17mm cross drilled nut for easy installation, removal, and lock wiring.
Check Stock

Inner Camshaft Needle Bearing Installer Tool & Remover Removal Puller Fit For 2017-2022 Harley Davidson Milwaukee Eight Engine (M8)

  • ..., 2017+ Harley Road King, 2017+ Harley Road Glide, 2017+ Harley Freewheeler, 2018+ Harley Fat Boy, 2018+ Harley Fat Bob, 2017+ Harley Electra Glide, 2017+ Harley Breakout..
  • APPLICATION: This camshaft bearing installer tool & remove puller fit for Harley Milwaukee Eight Engines (M8) models. Compatible with all Harley Davidson twin cam..
  • FUNCTION: The bearing puller is designed to grip the needle bearings and prevent them from falling into the crankcase. The installation tools are designed to press on the outermost diameter of the bearing, eliminating damage to the bearing, cam, or housing. The pressure adapter also sets the bearing to the proper depth..
  • FEATURES: The inner camshaft needle bearing installer tool & remover puller with special style collet and fine thread. Easy to install, the design holes can be suitable for the engine, and the installation progress can be checked..
  • MATERIAL: Made of heavy-duty steel with black powder-coated finished, prevent corrosion and rust, solid and durable. The kit includes 12 pieces, including a cam bearing plate, installer tools, puller tools, and thumb screws, as the picture shows..
Check Stock

S&S Cycle Quickee Pushrod and Cover Kit 106-6051

  • Everything you need to convert a Harley-Davidson Twin Cam 88 or Twin Cam 96 to adjustable pushrods.
  • Kit will accommodate all displacements from 88in. to 124in..
  • Kit includes: Quickee pushrod kit, chrome pushrod covers, gaskets, tappet cover gaskets, O-rings and cover keepers.
  • Design permits a simple, trouble free installation that does not require removal of the gas tank, rocker assemblies or even the rocker box cover.
  • Can be installed or removed from an assembled engine.
Check Stock

Barnett 1998-2012 Harley Big Twin Kevlar Clutch Kit w/Heavy Duty Diaphragm Spring

  • Fits 1998-2016 Harley Davidson Big Twin (EXCEPT 2013-2016 CVO/SE/FLHTC L).
  • 9 Barnett Clutch Friction Plates (Kevlar) #302-30-10013.
  • 8 Barnett Steel Clutch Drive Plates (0.063" Thick) #401-30-063014.
  • Barnett Heavy-Duty Diaphragm Clutch Spring #502-00-01008.
Check Stock

Mid-USA Air Filter Support and Bracket Kit for Harley Big Twin EVO Models 1993-98

  • Good Working Condition and Easy to Install.
  • Fits for Harley-Davidson all Twin Cam models 1999-Later, all Big Twin 1340 Evo Models 1985-1999, and all Sportster models 1986-Later ..
  • Package included: 2 x Head Bolt/Nut Covers.
Check Stock

Kuryakyn 9976 Motorcycle Air Cleaner Component: 1/2\-13 x 1-3/4\ Breather Bolt for 1999-2017 Harley-Davidson Twin Cam Motorcycles, 1 Pair

  • Provides a replacement piece for your motorcycle crankcase breather hose.
  • Install new or replacement breather components, allowing you to maintain your motorcycle condition.
  • Includes (2) 1 3/4" breather bolt for Twin Cam.
  • Suggested for installation (not included): original breather hose instruction manual.
  • Compatible with Harley-Davidson models: '99-'17 Twin Cams.
Check Stock

Electronic Ignition Kit Dual Fire Coil w/Dynatek DS6-1 - Fits Harley Davidson HD Carbureted 1970-2003

  • High quality 5 ohm late OEM style molded case ignition coil with Dynatek electronic ignition(DS6-1) for 12 volt HD ignition systems. Increases peak spark voltage by 20% or more. Kit improves starting, stops high speed misfires, increases mileage and overall performance..
  • IMPORTANT NOTE: Fits models with points or Prestolite Electronic Ignitions (DOES NOT FIT Twin Cam or EFI models).
  • IMPORTANT NOTE: REQUIRES the use of a mechanical advance unit, (not included) which were stock on earlier models..
  • Fits Harley Davidson: Big Twin - 1970-1999 | Shovelhead - 1970-1999 | Sportster - 1971-2003 | may fit other models....
Check Stock

Chrome Vented Gas Cap Motorcycle Tank Peanut Style Sportster Bobber Harley Davidson Dyna Electra Chopper Bayonet Cam Fuel Caps Custom Bike Builder Shovelhead OEM 61103-36 DS 139552 61102-73 75-003 005

  • ...lso known as cam gas caps) are vented and are chromed steel. An inexpensive cap that does the job and works with stock ('36 - '82) and aftermarket gas tanks with the bayonet style bung. This vented cap will work on single-cap model gas tanks or for the right-side gas tank on dual tank models gas cap Replaces Harley-Davidson OEM # 61103-36.
  • Chrome Vented Gas Cap for HarIey Gas Tank & Peanut Tank Bobber Style Cap 73-82.
  • Thanks for Looking at our Quality items,Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • Chrome Bayonet Cam Harley stock style Vented Gas Cap Shovelhead FL Sportster FX These bayonet style gas caps (also known as cam gas caps) are vented and are chromed steel. An inexpensive cap that does the job and works with stock ('36 - '82) and aftermarket gas tanks with the bayonet style bung. This vented cap The left-side gas tank on dual tank models requires a non-vented ....
Check Stock

DUNLOP American Elite Rear Tire 180/55B18

  • Dunlop’s American Elite is the only aftermarket tire line for Harley-Davidson® motorcycles that’s designed and tested in the U.S.A..
  • Available in 28 options to fit most Harley-Davidsons, the American Elite features MT Multi-Tread rear-tire technology for great handling and high....
  • Sizes available for newer and older Harley-Davidson models and select Victory and Indian® motorcycles..
  • Multi-Tread - Two compounds in the same tread give riders great mileage without sacrificing handling..
Check Stock

S&S Cycle 310-1014A Gear Drive 475G Cam Chest Kit for OC M8 Models

  • S&S Cycle 310-1014A Gear Drive 475G Cam Chest Kit for 2017-Newer Oil-Cooled Milwaukee-Eight Harley-Davidson Models.
Check Stock

Passenger Floor Boards Footboards with Mount Bracket Kit Compatible with 1993-2020 Harley Touring (Streamliner Style, Black)

  • Packet contains One Pair (Left and Right) Vertical Passenger Floorboards, 2pcs (Left and Right) Mounting Brackets and Set of Mounting Hardwares.
  • Black Passenger Foot Board Kit with Chrome Streamline Design for an Outstanding Look. Foot Gripping Rubber Pads for Comfortable Feeling.
  • Compatible for 1993-2018 Harley-Davidson Electra Glide Classic - FLHTC, 1996-2006 Harley-Davidson Electra Glide Classic Injected - FLHTC I, 1995-2018 Harley-Davidson Electra Glide Standard - FLHT, 2003-2006 Harley-Davidson Electra Glide Standard Injected - FLHT I, 1993-2018 Harley-Davidson Electra Glide Ultra Classic - FLHTCU, 1995-2006 Harley-Davidson Electra Glide Ultra Classic Injected-FLHTCU I.
  • Compatible for 1999-2013 Harley-Davidson Road Glide - FLTR, 1998-2006 Harley-Davidson Road Glide Injected- FLTR I, 1994-2018 Harley-Davidson Road King - FLHR, 2009-2018 Harley-Davidson Road King Classic - FLHRC, 1998-2006 Harley-Davidson Road King Classic Injected - FLHRC I, 2004-2006 Harley-Davidson Road King Custom - FLHRS, 2004-2006 Harley-Davidson Road King Custom Injected - FLHRS I, 1996-2006 Harley-Davidson Road King Injected - FLHR I.
  • Compatible for 2006-2018 Harley-Davidson Street Glide - FLHX, 2009-2018 Harley-Davidson Tri Glide Ultra Classic FLHTCUTG, 2009-2018 Harley-David....
Check Stock