Top Oil Line Fittings
mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)
- Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
- Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
- Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
- Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
- Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check StockImproved Racing EGM-106 Low-Profile Oil Cooler Adapter for GM LS Engines, 10AN
- 100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
- Slim design provides maximum clearance for aftermarket headers.
- Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
- 6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
- Made in USA. Lifetime manufacturer's warranty.
Check StockBrass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12
- ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
- ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
- ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
- ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
- ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check StockUtah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)
- Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32~140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
- Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32~140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
- Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
- You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
- All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check StockFuel Line Pliers Tweezer Set DEF Exhaust Fluid Lines Disconnect Removal Tools
- FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings..
- FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes..
- EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
- WHAT YOU GET: The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
- DURABILITY: All fuel line quick disconnect heater hose disconnect tools are made of hard plastic to secure the strength and sturdiness..
Check StockUtah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack
- straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32~140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
- Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32~140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
- Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
- You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
- All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check StockKuryakyn 9931 Bluegrass Breather Catch Tank for Harley-Davidson Motorcycles, Chrome
- Features banjo fittings and chrome tubes that route the vented gasses upward so gravity can keep any expelled oil droplets in the engine.
- Helps in venting expelled oil from the cylinder heads.
- It is recommend to vent the crankcase in open air by running the vent line up and out of sight beneath the tank.
- Includes (1) Chrome Catch Tank Assembly, (1) Chrome - LIL Tank, (1) Chrome - LIL Tank Inlet Rib, (1) Rubber Gasket, (1) Vent Pipe, (1) Oil-Safe Sponge, (1) Hardware Kit.
- Suggested for installation (not Included): allen wrenches.
- Compatible with Harley-Davidson models: Using the Bluegrass Breather Kit.
Check StockDorman 624-548 Transmission Oil Cooler Line for Select Subaru Models
- Upgraded replacement – this transmission oil cooler line is made of stainless steel for increased durability.
- Application specific – made to match the fit the function of the original line on certain Subaru Forester and Impreza model years.
- Complete repair – comes with fittings and brackets attached for installation.
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience.
- Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check StockMishimoto MMTCL-DMAX-06 Transmission Cooler Line Kit, Compatible With Chevrolet/GMC 6.6L Duramax (LLY/LBZ/LMM) 2006-2010
- Compatible with 2006-2010 LLY/LBZ/LMM Duramax.
- PTFE inner line is extremely oil and heat resistant for maximum durability.
- High-strength nylon outer braid prevents expansion under high pressure and protects line against abrasion.
- High-flow -10AN lines and fittings ensure high flow while preventing leaks.
Check StockDrainzit STAN1438 Oil Change Aid for Briggs & Stratton Tecumseh 3/8' Oil Port
- Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
- Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
- Efficient - custom made metric fittings seal kit to engine with O-ring.
- Rubber retainer loop holds kit in place when not in use.
Check StockGlarks 156Pcs Metric & SAE Straight and 45 Degree and 90 Degree Hydraulic Grease Brass Zerk Grease Nipple Fitting with 60Pcs M6 M10 Caps Assortment Kit
- ☀ [What You Get]: This kit includes 12 sizes of Metric and SAE grease fittings, M6 x 1 straight for 10pcs, M6 x 1 90-degree for 7pcs, M6 x 1 45-degree for 7pcs, M10 x 1 90-degree for 10pcs, M10 x 1 45-degree for 7pcs. 1/8''-27 straight for 10pcs, 1/8''-27 45 degree for 7pcs, 1/8''-27 90 degree for 7pcs, 1/4''-28 straight for 10pcs, 1/4''-28 45 degree for 7pcs, 1/4''-28 90 degree for 7pcs. Red(M6) caps for 30pcs, black (M10) caps for 30pcs. Total 156pcs which are sorted packed in a plastic box..
- ☀ [Premium Material]: Grease fittings are made of high-quality brass. Not only the surface is clean and shiny, but also anti-corrosion and anti-rust. They can work for a long time, use them to replace damage zerk fittings, and you will no longer have to worry fitting loss or damage..
- ☀ [Strong Tightness]: The thread on the grease fittings is clean, tidy and deep, which can ensure that fitting is tightly engaged with grease lines, and prevent the fitting from fulling off or oil leaking form the side..
- ☀ [Grease Fitting Cap]: Red (m6), black (m10) caps are included in the kit, different colors are convenient for you to distinguish. They can prevent dust, dirt and other pollutants from entering the nozzle, thereby extending the life of the grease fittin....
Check StockEilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)
- 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
- 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
- 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
- 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock