Top Oil Pressure Sender Unit

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

  • MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
  • Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
  • Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
  • One-year Limited Warranty & Free Lifetime Technical Support.
Check Stock

AODITECK 240-33 ohms 7'(180mm) Fuel Sending Unit Marine for Boat Car Fuel Tank Sender Fuel Water Level Sensor Marine Gas Water Tank Sensor Fuel Gauge Sending Unit Truck Marine Gas Water Tank Sender

  • Direct replacement for swingarm sender, wema sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank..
  • "Easy to install, easy hookup!" The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions.
  • The wiring instructions are straight forward and easy to follow. Takes about 15 minutes to install total, getting the fuel gage working again..
  • SAE 5 hole mounting pattern, heavy duty 316 stainless steel and rugged construction. Signal Output: 240 ohms-33 ohms. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto..
  • Warranty Period: 1 year. We have local support in the USA,so we will generally not be asking customer to return parts to China if they have an issue. If you have special requirements, please contact us and we can customize for you..
  • Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal ..
Check Stock

ROUSHUN 5" Capacity Rain Gauge Glass Replacement Tube for Yard Garden Outdoor Home (Pack of 2)

  • 【Clearly】Once the ignition switch is turned on, a clear display appears by colored LED illumination.Red and blue give you the clearest data at night..
  • 【Packge】It include water temperature sensor,oil temperature sensor and oil pressure sensor,that gives you the most detailed car information,like Water Temp Unit,Oil Temp Unit,Oil Pressure Unit and Nater Pressure Unit..
  • 【Visual Automatic】5 inch diameter, with black face, smoked lens and super bright LED background light. The gauge dial and the needle pointer provide high visibility.Self-Calibration mode at start-up and Adjustable setting for shift light..
  • 【100% Guarantee】If the product is damaged or can not be used, the customer can contact us, we will provide customers with satisfactory solutions.Customers can rest assured that the use of..
Check Stock

100TECH Fuel Sending Unit 240-33 ohms 11'(280mm） Marine for Boat Vehicle Truck RV Fuel Tank Sending Unit Fuel Water Level Sending Unit Fuel Gas Sender Fuel Water Level Sensor Fuel Gauge Sending Unit

  • 100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank..
  • The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4"-24", Please Contact us Directly for More Information..
  • [Easy to Install] The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions.
  • The Wiring Instructions are Straight Forward and Easy to follow..
  • SAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto..
  • [The Size of Float] The Diameter of Float is 1.38"(35mm). If You Have to Drill the hole, Diameter 1.50"(38mm) Hole Would be Perfect..
Check Stock

Orei HDMI Extender UltraHD Over Single Cat6/Cat7 Cable 4K @ 60Hz with HDR & IR Control - Up to 165 ft EDID Management

  • Extends [email protected] HDR or non-HDR video signal up to 164 feet (50 meters) using our HDMI over Cat6 Ethernet cable extender kit.
  • HDMI 2.0, HDCP 2.2 Compliant with Maximum input/output resolution: up to [email protected] RGB/ycbcr 4: 4: 4/ ycbcr 4: 2: 2.
  • Local HDMI loop-out output on transmitter to connect a display near the source.
  • Power over Cable – only use one power adapter at the sender side to....
  • One-way IR control to control the source from the remote display at the receiver side and option to copy EDID signal from the transmitter's loop-out....
  • Includes: Sender unit, Receiver unit, Instructions manual, World-wide voltage power adapter. & IR-kit. Lifetime OREI Tech Support & 12-Month....
Check Stock

MOTOR METER RACING EVO Series Digital 6 Gauge Set Includes GPS Sensor mounting kit

  • ... 12-volt negative ground systems. Red, Blue, White & Green to be select as displaying light color, brightness adjustment.
  • 4 types of dimmer setting where the color can be shift according to users' needs in different conditions..
  • Specification Water Temp, Volt, Oil Pressure & Fuel Gauge: Standard 2"(52mm) dial 2-1/16"(52.4mm) opening. Red & Blue to be select as displaying light color, brightness adjustment..
  • Features: EVO 6 Gauge Set applying the latest LCD movement technology with the display of precision. It is designed for in-dash usage, while suitable on-dash mounting cups available to be ordered — flat clear acrylic lens with plastic housing, designed to be installed with ease..
  • Packaged: Speedometer GPS sensor and convector, fuel level sender, water temp sensor (Thread size: 1/8 NPT), oil pressure sensor (Thread size: 1/8 NPT), 3-3/8" mounting stand (2 pcs), wiring harness, installation manual..
  • Warranty: One-year for non-human factor damage and free lifetime technical support.
Check Stock

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • 10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
  • Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
  • Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
  • Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.
Check Stock

Auto Meter 7004 InVision Direct Fit Digital Dash LCD 73-87 Chevy/GMC Full Size Truck

  • ...ith 4 Switchable Colors (Red, Blue, White & Green). Equipped with Peak Recall and Warning Function to Guarantee Accurate Data and Road Safety.
  • SPEC.: (Speedometer & Tachometer): Standard 3-3/8" (85mm) Dial and 3-3/4" (95mm) Opening. (Water Temp, Volt, Oil Pressure & Fuel Gauge): Standard 2"(52mm) Dial 2-1/16"(52.4mm) Opening. EVO Gauge Set Requires any 1 to 9 Cylinder Engines Only - Compatible with 12-volt Negative Ground Systems.
  • Features: 4 Color Mode, 6 Level Brightness Adjustment.
  • 4 Types of Dimmer Setting where the Color Can be Shift According to Users' Needs in Different Conditions. It is Designed for In-dash Usage, While Suitable On-dash Mounting Cups Available to be Ordered - Flat Clear Acrylic Lens with Plastic Housing, Designed to be Installed with Ease.
  • Packaged: Speedometer GPS Sensor, Fuel Level Sender, Water Temp Sensor (Thread size: 1/8 NPT), Oil Pressure Sensor (Thread size: 1/8 NPT), 3-3/8" Mounting Stand (2 pcs), Daisy Chain, Wiring Harness, Installation Manual.
  • Warranty: One-year for Non-human Factor Damage and Free ....
Check Stock

Suuonee Electronic Boost Gauge Sender, Auto Car Electronic Boost Gauge Sender/Sensor Unit Practical Accessory

  • Adaptation: Car Electronic Boost Gauge Sender is only fits for Ford Mustang 86-93 gauge. Pressure sensor with vacuum tube for replacing defi link pressure gauge..
  • High Quality: Electronic Boost Gauge Sender is made of high quality material for maximum durability, which has long service life. Good quality can provide a safer guarantee for your life..
  • Excellent Performance: Electronic Boost Gauge Sensor adopt advanced manufacturing, high reliability and high performance. Original standard, direct replacement for the old or broken one..
  • Easy To Install: Electronic Boost Gauge Sensor is easy to install, no complicated tools required, convenient to use. Let you get rid of the trouble of installation..
  • Quality Assurance: We offer a 12 month warranty, true worry free shopping experience. If you have any problem, feel free to contact us, our professional mechanic will sort things out for you..
Check Stock

GlowShift Replacement 2 Post Oil Pressure Gauge Sensor Sending Unit 1/8-27 NPT Thread

  • Replacement Electronic 0-100 PSI Oil Pressure Gauge 2 Post Sensor Sending Unit.
  • Compatible with GlowShift 7 Color Series Oil Pressure Gauge - Previous Model (GS-T704, GS-C704, GS-W704).
  • Compatible with GlowShift 10 Color Digital Series Oil Pressure Gauge - Previous Model (GS-TCD04).
  • Compatible with GlowShift Tinted Series Oil Pressure Gauge (GS-T04).
  • Compatible with GlowShift Blue & Red Digital Series Oil Pressure Gauge (GS-BD04, GS-RD04).
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

Mastercool 69110 Automotive A/C Recovery System,Blue

  • This is a RECOVERY ONLY unit. Refrigerant recharge CANNOT be performed..
  • DESIGN CERTIFIED to meet SAE J2810 while also being 100% U.S. designed, assembled and tested.
  • RECOVERS AND REMOVES oil from refrigerant.
  • STATE OF THE ART ½ horsepower oil-less compressor with built-in high volume cooling fan for fast recovery.
  • COMPRESSOR PROTECTED by a safety high pressure cut-off switch that shuts the unit off when pressure exceed 500 psi.
Check Stock