Top Oil Pump Bushing

Flex-a-lite 14524 Mill Finish 1/2\ Fan Spacer Kit

  • This fan spacer extends the fan 2.5 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords. Fords.
Check Stock

Transtec Overhaul Kit 4R70W 4R75W 4R75E 04-17

  • New pump seal, bushing, gasket and o-ring.
  • This pump will work with all 4R70W / 4R75W 2004-2008 Transmissions only!.
  • Built by experienced transmission builders in a professional shop.
Check Stock

Ice-O-Matic KPU090 Pump Kit for Ice Maker GEMU090

  • PUMP KIT FOR GEMU090: The Ice-O-Matic Pump Kit designed for the GEMU090 Nugget Pearl Ice Machine, Pump kit installed inside the ice maker cabinet for built in applications..
  • IDEAL FOR ICE MACHINES WHERe FLOOR DRAIN IS NOT AVAILABLE: This ice bin sump pump is perfect for installation in office break rooms, doctors offices or residential homes, that might not have access to a floor drain..
  • PREVENTS FLOODING: This pump kit helps remove the water that condenses after ice melts inside the machine, preventing the ice maker from being flooded and making it easier to clean..
  • DRAINAGE: This part forces drain water to a maximum of 10 feet and includes the pump, wiring harness, and tubing. The check valve is designed to prevent repumping of drain water into the drain hose..
  • KIT INCLUDES: Pump and motor with check valve, Switch mounting bracket assembled to switch assembly, Wire harness, Pressure hose (clear), Drain hose (white preformed), Stainless Steel shield and Misc Hardware (Snap Bushing, Hose Clamps, Mounting Bolts and Screws).
Check Stock

Canton Racing 75-630 3\ Fan Spacer Billet Aluminum with Bolts for Chevy and Ford

  • This fan spacer extends the fan 3 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

Canton Racing 75-620 2\ Fan Spacer Billet Aluminum with Bolts for Chevy and Ford, 1 Pack

  • This fan spacer extends the fan 2 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.
Check Stock

12V Electric Transfer Pump 5L DC Transfer Pump, 12V 60W Oil Extractor Pump for Car Marine Boat Scavenge Exchange Transfer Pump Engine Oil Extractor

  • DC 12V 5L Transfer Pump – Fast & Convenient: This 12v oil change pump is made of premium materials and electric fluid transfer pump can be used for a long time. DC 12V 5L transfer pump maximum flow 5L/min. 12V Electric Oil Extractor Pump allows to be used in a variety of different environments to transport liquids, such as 12v oil extractor pump for boats. Electric oil change pump is easy to use.
  • Fuel Extractor Pump are Widely Use:This electric motor oil extractor pump is general industrial equipment, chemical equipment, shipping, vehicle cleaning, agricultural spraying, drinks, carpet and floor cleaning, air cleaning cooling, water purification and water treatment equipment, ZO pipeline pressure, coal and metallurgical industries.
  • DC 12V 5L Oil Transfer Pump – Powerful Motor: Oil extractor transfer pump is equipped with the strong motor and adopting a continuous working principle, good help when you pump.Oil & fuel transfer extractor pump maximum voltage reach 12V and the maximum pressure 0.8mpa, the flew rate up to 5L/min. Electric oil extractor pump ideal for filling diesel powered vehicles or engines at your garage or repair shop. It can quickly and conveniently help you solve the problem of pumping liquid.
Check Stock

Danco, Inc. 89487 Lift and Turn Bath Trim Kit, 1-Pack, Oil Rubbed Bronze

  • EASY BATHROOM FIXTURE UPGRADE: Oil rubbed bronze finish trim kit provides a stylish elegant look to your tub shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

Wolo (858-C) Tornado Heavy-Duty Compressor

  • Replacement compressor that is designed for applications that require filling large volume air tanks, up to 2.5-gallons.
  • The tank recovery time is shorter because of the high volume output the pump produces, 2.55 CFM.
  • The compressor is equipped with an extra-long stainless steel feeder hose that allows for easier installation.
  • The pump's cylinder and head have been designed with cooling fins that allows the compressor to have a 33 percent at 100-PSI duty cycle that.
  • The compressor's heavy-duty 12-volt motor is balanced to precision and there is heavy rubber bushing mounted into the base to virtually eliminate all vibration.
Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

  • 【Widely Used】Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawn mowers and various machinery to change the oil.The DC oil pump adopts the vane pump working mode..
  • Diesel or heating oil: approx 6.0-7.0L/min.
  • Motor oil(40-60℃)：approx 0.8-1.0L/min.Measurements:3.3*5.1*4.9in,Weight:1.87pounds,Maximum delivery Height:0.7m..
  • 【Working Principle】When the oil well pump rotor rotates, the blades on the rotor are closely attached to inner surface of stator under the action of centrifugal force and oil pressure, so that the 2 blades are formed by inner surface of rotor and stator. The working volume of pump is first to absorb oil from small to large, and then to discharge oil from large to small after absorbing oil. Within one rotation of blade, oil absorption and discharge are completed twice. This cycle continues..
  • 【Package Include】The pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative pol....
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock