Top Oil Pump Pickup Tube Adapter

Improved Racing EGM-500 LS Engine Oil Pump Pickup Tube Brace/Girdle

  • Machined from lightweight 6061-T6 aluminum, black anodized and laser-marked.
  • Distributes even clamping force around pickup tube flange by acting as an extension of the flange.
  • High-strength Class 10.9 M6 flange screws, zinc plated.
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM Truck tube part # 12608593, Holley 302-1 and similar). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar)..
Check Stock

ICT Billet LS Billet Oil Pump Pickup Girdle Tube Pipe Hold Down Brace Support LS1 LS3 LS2 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 L98 L99 551910

  • Most LS oil pickups are secured to the oil pump using only 1 bolt on one side of the flange. This girdle straddles the flange and secures the pickup tube to the oil pump with 2 bolts for maximum clamping capacity..
  • Compatible with all LS series engines 1997-2014.
  • Made in the Wichita, KS from aerospace grade, USA billet aluminum.
  • Will not work with pick up tube with flange retainer tab (see photo)**.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • ... is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • ...ump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Aluminum 15 to 55 Gallon Drum Pump Rotary Hand Liquid Transfer Heavy Duty Rotary Barrel Pump Hand Drum Pump for Kerosene Gasoline Oil Fuel Diesel Hydraulic Fluid

  • Hand Drum Pump: The overall height of the pump is 51inch, the length of the oil outlet pipe is 39 inch, and the inner diameter of the oil outlet is 1.1" (28mm). oil outlet pipe can be adjusted to fit 15 to 55 gallon drums. Tip: only for oils. Note: Do not use it to pump water,it is not suitable..
  • Quality Aluminum: Our drum pump is made of high-quality all aluminum material, which is highly anti-corrosion and anti-rust, durable and lasts longer. Our 55 gallon drum pump supports clockwise transfer handle instead of counterclockwise transfer handle..
  • Applicable Type of Oil: Extractable liquid: Diesel oil, kerosene, engine oil, hydraulic oil, Gear oil, edible oil (but not edible grade). Liquids that cannot be extracted: Gasoline, water, urea, acid-base liquid, corrosive liquid, chemical liquid, edible liquid, etc. cannot be extracted..
  • Great Filter: Our hand liquid transfer drum pump distribution has a fine filter. You only need to install it at the bottom of the suction tube, which can effectively separate the oil dirt and oil, so as to ensure that pure oil is pumped..
  • Good Sealing: 3 piece segmented suction tube, easy to adjust the length of suction tube according to the actual situation, and easy to store and carry at the same time.suction tube with screw....
Check Stock

SEDY Lubricant Fluid Transfer Pump for Gallon Bottles and Wide Mouth Quart Bottles Hand Transfer Gear Oil, Transmission and Differential Fluid with 3rd Hand Adapter to Secure Fill Tube While Pumping

  • ▲High quality, easy to use for your car, truck, RV, boat, motorcycle and easy to use in daily life..
  • ▲Fits standard quart containers. 8cc per Pump Stroke, 24” long flexible tube for pumping fluids into tight and awkward places. 3rd hand adapter to secure fill tube while pumping.Two different lengths of suction tubes for different height quart bottles..
  • ▲Fluid transfer between containers, or from container to engine, cooling system, etc. Plunger pump conveniently screws in and locks down for storage..
  • ▲Dozens of uses including oil changes, siphon gasoline, antifreeze fluid, other liquid, shampoo, body wash, antifreeze (Glycol), biodiesel, diesel, E15 fuel, engine/motor oil, gasoline, hydraulic oil, kerosene, machine oil, mineral spirits, transformer oil, transmission oil, vegetable oil, water, etc..
  • ▲GUARANTEED - Since we are confident in our products and services, please let us know, if for any considerations, you're not 100% satisfied with your purchase, we'll make it best for you. Backed by SEDY 30-Days Money-back Satisfaction Guarantee & Manufacture....
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
  • 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock

Thorstone Automotive Fluid Extractor Pump 500cc

  • TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 1/4" and 3/8" extension tubes each at 8.6 inches long, reaching hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid..
  • LEAK FREE FLUID EXTRACTOR - The Locking botton helps you to operate safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an air tight seal, the precision threading at the end of tube prevents leakage..
  • EFFICIENT LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Removes mechanical liluids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • WHAT'S INSIDE - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.
Check Stock

Billet Black Aluminum Valve Cover Oil Cap w/-10 AN Fitting for LS LSX LS1 LS2 LS3 LS6 LS7

  • Our auction is for LS1/LS6/LS2/LS3/LS7 Billet Black Valve Cover Oil Cap w/ -10 AN Fitting..
  • This valve cover adapter replaces the original oil fill tube on the factory valve cover..
  • It is CNC-machined from billet aluminum for precise fit then anodized black, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the adapter..
  • The top of the adapter is machined to accept a -10 AN hose end to facilitate the installation of a custom crank case evacuation system, PCV system, or for use with a vacuum pump..
  • Designed to fit nearly any LSX engine!It will protects your engine and lets it breathe freely..
Check Stock

DEMOTOR PERFORMANCE For 80-85 SBC Chevy Retro Finned Polished Aluminum Oil Pan 305 350 Small Block

  • Polished finned aluminum oil pan for small block Chevy.
  • This oil pan fits 1980-1985 2 piece rear main Chevy 305 327 350 engines.
  • Stock style 4 quart pan capacity with stock pickup.
  • The dipstick is on the passenger side and you can use the original oil pump pickup.
Check Stock

Thorstone Automotive Fluid Extractor Pump, Oil Change Syringe with Hose, Manual Fuel Suction & Filler, Fluid Oil Change Evacuator (7 Oz./0.21 Qt./200 CC)

  • ...uum fluid pump is designed to be chemical and oil resistant. Remove mechanical liquids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • PACKAGE CONTENTS - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.
Check Stock