Top Oil resistant Gaskets

350 Pieces Rubber Grommet Assortment Kit Firewall Hole Plug Electrical Wire Gasket Rubber Ring Gasket with Plastic Box 15 Sizes for Automotive, Plumbing, PC Hardware Piano (2 Boxes)

  • Package content: there are two types of rubber grommets in the package, which are stored in plastic boxes.
  • Including rubber grommets that are no opening and rubber ring gaskets, the rubber grommet is designed to cover a hole that is no longer in use and protect cable or wire.
  • while the ring gasket is designed to run wires through the firewall.
  • Ample quantity and various sizes: the package contains 170 pieces of rubber grommets in 7 different sizes and 180 pieces of ring gaskets in 8 different sizes, a total of 350 pieces grommets in 15 sizes, enough quantity and various sizes to meet your different needs.
  • Quality material: these electrical wire gaskets are made of quality nitrile rubber (NBR), which are flexible, tough, oil-resistant, heat-resistant, UV-resistant, and feature with nice electrical resistance performance.
  • Easily store and carry: these rubber gaskets are stored in 2 plastic boxes with grids, storing gaskets in different sizes so you can easily and quickly find the size you need, and it is also convenient for you to carry around.
  • Wide application: these rubber grommets are designed to protect wires or cables from abrasion on rough surfaces, they are also widely applicable for automotive, pump, valve, water pipe, spray, electrical appliance, ....
Check Stock

226 Silicone O-Ring, 70A Durometer, Red, 2\ ID, 2-1/4\ OD, 1/8\ Width (Pack of 10)

  • MATERIAL: High quanlity NBR ring with carbon steel, good sealing. Anti static, high pressure resistant, oil resistant, corrosion resistant, UV resistant, heat resistant, wear resistant, durable and long service life. Quantity: 12 Sizes,240 Pieces rubber metal combination O Ring gaskets, meet almost all your needs..
  • PRODUCT FEATURE: Reliable low and high pressure sealing, High and low temperature capabilities, Bolt torque is reduced with no loss of tightening load. Bonded washers are used extensively for sealing under the heads of bolts in high pressure applications where coppers washers would be unsuitable. They are often used in hydraulic and pneumatic connections that are subject to extreme pressures..
  • WIDE APPLICATION: Oil pipeline system as a medium, for mechanical device, to prevent oil, fuel, water and gas leakage, etc. Great for high pressure fuel systems, brake caliper banjo bolt, brake master cylinder, fuel line bolts and water line bolts in turbos, automotive replacement drain plug gaskets, etc..
  • EASY TO USE PACKING: All O-rings are stored in a sturdy plastic box with labels, that avoids the trouble of sorting and selecting the size. Variety of thickness and size are all in one box, very convenient to use..
Check Stock

Loctite 37394 Anaerobic Gasket Maker - 1.69 oz.

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area. Eliminates the need for preformed, paper, rubber & cork gaskets..
  • INCREASED OIL RESISTANCE. Tolerates contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
  • IMMEDIATE CURING. Operating strength of 15 PSI within 1 minute of application. Equipment can return to service immediately!.
  • LOCTITE READY GASKET replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock

LJSF Washer 3 Sizes, O-Ring Hose Gasket, Flat Rubber Gasket, Many for Faucet Gasket, Black 50 Pieces Rugged and Durable, Strong Sealing (Size : 4 x 13 x 3MM)

  • O-ring hose gaskets, flat rubber gaskets, many are used for faucet gaskets.
  • Dimensions (ID * OD * T): 4 x 11 x 4MM, 4 x 13 x 3MM, 6 x 16 x 1.5MM.
  • The flat rubber gasket is made of rubber material, has a round shape, and is easy to install..
  • Heat-resistant and oil-resistant sealing ring..
  • Widely used in bathroom products, valves, faucets, bearings, hydraulics, pumps, household appliances, toys, motors..
Check Stock

Permatex High Tack(TM) Spray-A-Gasket(TM) Sealant (80064)

  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket.
  • eliminates the need for pre-formed, pre-cut, paper, rubber or cork gaskets.
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute.
  • protects against leaks and seepage caused by vibration and thermal expansion.
  • Formulated to meet or exceed performance standards for long-term sealability, durability and handling.
  • this material is used on OEM production lines and specified in their service parts programs.
  • Temperature Range: -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent.
  • Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps.
Check Stock

12 Pack M16 Engine Oil Drain Plug Sealing Washers/Crush Gaskets 803916010 Fit Replacement for Subaru Outback Crosstrek Forester WRX BRZ Impreza Engine Oil Seals Rings Silver

  • Made to specific sizes and standards to ensure a proper fit/Designed and constructed to strict engineering quality standards.
  • Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
  • Easy to install, save your money. Leak free, great value for 12 pack. Spec: ID 16mm/ OD 21mm/ Thickness 2.5 mm.
  • This 16 mm / 0.63 inch oil drain plug gaskets crush washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces.
  • This oil drain plug gaskets crush washers is for Subaru Outback Legacy Impreza Forester BRZ XV Crosstrek, see more vehicle details in the description part.
Check Stock

Permatex 80022 Sensor-Safe Blue RTV Silicone Gasket Maker, 3 oz. Tube

  • Effectively replaces almost any cut gasket.
  • Makes reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating.
  • Coats pre-cut gaskets to increase reliability without fouling oxygen sensors.
  • Temperature range of -65 degrees fahrenheit to 500 degrees fahrenheit intermittent.
  • Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans.
Check Stock

KOOTANS 240pcs 12 Sizes NBR Metal Bonded Sealing Washer Assort Kit Hydralic Oil Resist Rubber Oil Pipe Seal Gasket Metric NBR Metal Combination O-Ring Assortment Kit

  • MATERIAL: High quanlity NBR ring with carbon steel, good sealing. Anti static, high pressure resistant, oil resistant, corrosion resistant, UV resistant, heat resistant, wear resistant, durable and long service life. Quantity: 12 Sizes,240 Pieces rubber metal combination O Ring gaskets, meet almost all your needs..
  • PRODUCT FEATURE: Reliable low and high pressure sealing, High and low temperature capabilities, Bolt torque is reduced with no loss of tightening load. Bonded washers are used extensively for sealing under the heads of bolts in high pressure applications where coppers washers would be unsuitable. They are often used in hydraulic and pneumatic connections that are subject to extreme pressures..
  • WIDE APPLICATION: Oil pipeline system as a medium, for mechanical device, to prevent oil, fuel, water and gas leakage, etc. Great for high pressure fuel systems, brake caliper banjo bolt, brake master cylinder, fuel line bolts and water line bolts in turbos, automotive replacement drain plug gaskets, etc..
  • EASY TO USE PACKING: All O-rings are stored in a sturdy plastic box with labels, that avoids the trouble of sorting and selecting the size. Variety of thickness and size are all in one box, very convenient to use..
Check Stock

[OEM Products] BENEDETTO Auto Service 10 PCS Oil Drain Plug gaskets/Crush washers Replacement for Toyota Drain Plug Washer Replaces# 90430-12031 Aluminum (QTY10)

  • Toyota oil drain plug gasket Part Number: 90430-12031, 9043012031, , 90430-A0006, 90430-C0005, for Dorman 095-156, 095-156CD, and 65394.
  • 90430-12031, oil drain plug gasket: Fits Lexus Scion Toyota CT200h ES350 Prius Tundra Sienna Corolla 4Runner Highlander Camry Tacoma RAV4 Scion tC xB xD Oil Drain Plug Washers..
  • Specification: Thickness: 0.07inch, Inside diameter: 0.48 inch, Outside diameter: 0.82 inch.
  • Easy to install and High-Quality Material and Performance Aluminum toyota oil drain plug gasket.
  • 90430-12031 Oil Drain Plug Gaskets is a ring-shaped part that keep the drain plug tight and free from leaks and helps to seal the drain plug and oil pan surfaces. When it's time to change your Toyota's oil and oil filter, it may also be time to replace the drain plug gasket. Prevent oil leaks with "crush" gaskets.
  • 10 Year Warranty: If these toyota oil drain plug gaskets damaged, please feel free to contact us for reship or refund..
Check Stock

Loctite 231230 Gray 5999 Gasket Adhesive/Sealant, Paste, -75 to 625 Degrees F Temperature Range, 300 mL Cartridge

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area. Eliminates the need for preformed, paper, rubber & cork gaskets..
  • OIL RESISTANCE. Tolerates minor contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
  • CONVENIENT CURING. Tack-free in 30 minutes. Full-strength in 24 hours..
  • LOCTITE 5015 RTV BLUE SILICONE replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock

LIMICAR Cylinder Head Gasket Set Head Bolts ES72173 (1st Generation) Compatible w/ 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 Chevrolet Silverado Tahoe GMC Yukon Envoy Buick Cadillac 4.8L 5.3L

  • ...void leakage of coolant or engine oil into the cylinders.They are designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports..
  • ✅FUNCTION: LIMICAR Head Gasket Set are designed to save money by giving the technician the exact gaskets needed for installing an already reconditioned or fully assembled head. LIMICAR Head Gasket systems can withstand high pressures, high temperatures and aggressive media of a car. LIMICAR give technicians not only the gaskets the project requires, but the very best technology available..
  • ✅Package Inclued: Multi-layered Steel(MLS) Head Gaskets.
  • 30PCS Head Bolts(ES72173 1st Generation)..
  • ✅NOTICE: Please check the description and compatibility chart before your purchasing. Head Bolts Size 1: Quantity: 16, Length(mm): 155, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 2: Quantity: 4, Length(mm): 100, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 3: Q....
Check Stock

Loctite 5699 RTV High Performance Silicone, Grey, 190 ml

  • QUALITY. Remains flexible and withstands high vibration, low odor, noncorrosive, outstanding oil resistance and resists auto and shop fluids..
  • DESIGN. High torque applications the product exceeds manufacturers’ performance requirements..
  • EASY TO USE. Flexible gaskets directly on the flange and easy to apply..
  • TEMPERATURE. The temperature range is -75°F to 625°F (-59°C to 329°F) intermittent..
  • APPLICATIONS. Valve covers, oil pans, intake manifold end seals, timing covers, water pumps and thermostat housings..
Check Stock