Top One Touch In Fittings

Delta Faucet Trinsic Touch Bar Faucet Brushed Nickel, Bar Sink Faucet Single Hole, Wet Bar Faucets with Pull Down Sprayer, Prep Sink Faucet, Delta Touch2O Technology, Arctic Stainless 9959T-AR-DST

  • The design was inspired by the sleek elegance of modern European design.
  • A sleek sophistication in the kitchen for both style and functionality. Spout Length- 6-1/2 inch. Deck to Outlet-7 inch.62 inch long hose provides outstanding reach.
  • Touch activated faucet featuring Touch2O Technology. Turns on and off with just a touch anywhere on the spout or handle.
  • 1 or 3-hole 8 inch installation. Flow Rate is 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa. Fittings Type: 3/8 inches compression fittings. Deck Thickness: 2.5 inches.
  • Pull-down wand operates in an aerated or spray mode via ergonomic buttons.
Check Stock

Moen 87044SRS Whitmore One-Handle High Arc Kitchen Faucet, Spot Resist Stainless

  • LASTS 2X LONGER: Patented DIAMOND Seal Technology reduces leak points and lasts twice as long as the industry standard—ensuring leak-free operation for the life of the kitchen faucet (Industry standard is based on ASME A112.18.1 of 500,000 cycles).
  • MAGNETIC DOCKING: MagnaTite Docking uses a powerful magnet to snap your kitchen sprayer into place so it stays docked and doesn’t droop over time like other kitchen faucets.
  • EASY INSTALLATION: Designed to fit 2-hole, 4-in. configurations. Everything you need is together in one box, including InnoFlex PEX supply lines that are integrated into the faucet for one less leak point.
  • EASY TO CLEAN. Delta kitchen faucets with Touch-Clean spray holes allow you to quickly and easily wipe away calcium and lime build-up with a touch of a finger, so no need to soak or use chemical cleaners.
  • Pull-down spray wand features a 59-Inch hose providing a 20-Inch reach.
  • High-arc spout swivels 360° for complete sink access.
  • 32-in (minimum) Innoflex supply lines with 3/8-in compression fittings.
  • LIFETIME LIMITED WARRANTY: You can install with confidence, knowing this kitchen faucet is backed by Delta Faucet's Lifetime Limited Warranty.
Check Stock

Jienk 5PCS Pneumatic Male Straight 1/2\ Tube OD x 3/8\ NPT Thread Push to Connect Air Fittings, Quick Connector for Air Ride Air Horn Air Compressor

  • 【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
  • 【Wildly Application】 Working Temperature: 32～140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..
Check Stock

Heater Hose Adapeter, Aluminum Alloy Heater Hose Fitting 90 Degree Connector 1/2in NPT to 5/8in Hose Barb

  • 1.Feature : Heater Hose Adapeter built to meet standard specification, strictly follow factory quality control.Give that nice touch to your other engine accessories..
  • 2.Outstanding performance : Precision manufacturing ensure stable performance.Triple chrome plated, mirror like finish, smooth and durable..
  • 3.Premium quality : Machined out of one solid piece of aluminum and then chrome plated, super light weight compared to the oem fittings, it will never rust.so that make sure the Heater Hose Fitting work well all the time..
  • 4.Easy to install : The Heater Hose Fitting is easy to install, no modification is required.save time and effort.convenient for using.You can replace the old or broken one directly..
  • 5.Purchase service : We value the shopping experience and satisfaction of each customer, so we provide technical support. If the product install or quality have any problem, please contact us in time.We will solve it as soon as possible..
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

  • 2 set Heavy-Duty alloy steel galvanize grease zerk tool. One fits for 1/8"-NPT PTF grease zerk fitting, M10x1 and grease zerk fittings with hex size 3/8" (9.5mm) & 7/16" (11mm). One fits for Fits 1/4"-28 SAE, M8x1 and Zerk fittings with hex size 5/16" (7.85mm) & 3/8" (9.5mm).
  • A must have grease fitting multi-tool: 4 tools in one grease zerk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
  • Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
  • Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
  • Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary ....
Check Stock

Jienk 5PCS Pneumatic Female Elbow 1/4 Tube OD x 1/8 NPT Thread Push to Connect Air Fittings 90 Degree NPT Female Nickel Plated Brass Air Line Quick Connector for Air Compressor

  • 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. The thread port adopts nickel plated brass material. High pressure resistance, corrosion resistance and a long service life..
  • 【Good Sealing Performance】Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak. External tightening with a flat wrench or socket wrench..
  • 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
  • 【Wildly Application】Hose fittings are used in the field for low-pressure hydraulic and pneumatic systems such as Pneumatic Actuators, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, and Tire Installation or in industries including Printing, Packaging, Textile. As well as moving parts such as control-valves, cylinders, air bag and air ride..
  • 【Operating Pressure】 0~145 Psi 【Working Temperature】 32～140°F.
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock

Ivation 320,000 BTU Propane Torch, Heavy Duty Weed Burner, Extra Long 12’ Hose, Adjustable Flame Control, Outdoor Weed Killer for Weeds, Snow Melting, Roofing, Roads & More

  • no assembly required. The Swirl Flame ensures the maximum Heat Output!.
  • This Blow Torch has automatic one-touch ignition which makes the lighting quick and easy.
  • There is comfort ergonomic grip on the gas torch handle.
  • Use Propane or MAPP disposable fuel tanks (not included in the package).
  • This Welding Torch kit use such gas as MAPP, Propane (not for acetylene), with CGA 600 Connection.
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

DELTA FAUCET 441-WH-DST, 3.00 x 13.00 x 21.80 inches, White

  • Sleek design with the charm of simplicity.
  • DURAMOUNT Mounting w/ 2-1/2-Inch max deck thickness.
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa, Fittings Type: 3/8" compression fittings, Supply Lines: Included InnoFlex Pex-C Supply Lines, Valve Type: DIAMOND Seal Valve.
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock