Top One sided Pcb

EPOMAKER Next time Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight Rotary Knob Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch White

  • ...th hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX switches and its clones.
  • 【Amazing RGB Backlight&Music Rhythm Mode】RGB backlight is always considered as one of the important elements for mechanical keyboards thus TM680 make more than simple RGB backlight. It features a mesh structure at the bottom of the kit and side RGB lights design. The keyboard will be fully surrounded by amazing RGB effects.
  • 【Rotary Knob Control】A rotary knob control is there for easy access to volume. You are able to mute, turn up/down volume, control backlight brightness etc.. Easy, simple and elegant, EPOMAKER Skyline DIY Kit is such a functional mechanical keyboard kit for any one who is looking for something new and want to try customization.
Check Stock

SFB-7900D - Sundown Audio Monoblock Class-D Amplifier

  • Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

EPOMAKER Theory TH68 Pro 65% 67 Keys RGB Hot Swappable Programmable Bluetooth 5.0/2.4Ghz Wireless/USB-C Wired Triple Modes Mechanical Gaming Keyboard with Rotary Knob for Win/Mac (Gateron Pro Yellow)

  • ...swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX switches and its clones.
  • 【Bottom Mesh Structure RGB Light&Side RGB Light】RGB backlight is always considered as one of the important elements for mechanical keyboards thus Theory TH68 make more than simple RGB backlight. It features a mesh structure at the bottom of the kit and side RGB lights design. The keyboard will be fully surrounded by amazing RGB effects. Pls note that the LED under the Knob is connection indicator, it will turn off after your keyboard is connected for a few seconds. It will not be switched by your combination keys..
Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

  • ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
  • ⭐【Convenient for Projects】The upgrate 0.8mm....
  • ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
  • ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
  • Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
  • ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.
Check Stock

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

SUPERNIGHT Bright 600pcs LED Strip Waterproof Warm White 4000K Super Bright 600pcs LEDs 16.4ft LED Flexible Rope Lights Lighting for Garden/Home/Kitchen/Car/Bar/Christmas/Party/Indoor

  • 【600pcs leds VS 300pcs leds】Our this 16.4ft 3528 SMD strip light has 600pcs leds, is twice as bright as other common 300pcs leds strip in the....
  • 【Warm White Color】4000K Warm White color strip emits gentle light,creating sweet and happy atmosphere..
  • 【IP65 waterproof PCB】This 16.4ft length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more....
  • 【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier. This SUPERNIGHT strip can work....
Check Stock

SUPERNIGHT LED Light Strip Waterproof RGBW RGB + Warm White 16.4ft/5M SMD 5050 Mixed Color Changing 300 LEDs Flexible Rope Lights for Party,Bedroom,Home,Car,Boat,TV Decoration,Valentine Decor

  • 【SMD 5050 RGBW LED Rope Lights】There are 150pcs RGB LEDs+ 150pcs Warm White LEDs multi-color changing leds on 16.4ft flexible PCB. This SUPERNIGHT....
  • 【Warm White Color】You can use RGBW remote controller to turn on the warm whites individually, together or in conjunction with the colors. Standard....
  • 【IP65 waterproof PCB】This 16.4ft length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the FPCB to....
  • 【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier.It will be peferct for your....
  • 【Aplication & Tips】Suitable for indoor lighting and decoration. Such as kitchen, under cabinet, dining room, bedroom, garden, party, wedding,....
Check Stock

DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects

  • 100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
  • 0.1" hole spacing for DIP integrated circuits and headers..
  • THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
  • MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
  • Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
  • THE FLEXIBILITY OF HAVINg CHOICES  ★  Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
  • PACKAGE COMPONENT  ★  40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
  • 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.
Check Stock

60 Pieces Breakaway Pin Header, 40 Pin 2.54mm Straight Single Row Male Pin Header Connector for Arduino Prototype Shield

  • Break Away Headers: Pcb pin head is a straight single row connector, the size of pin pitch is 2.54mm/0.1 inch and there are totally 40 number of pins on each..
  • Easy to Cut: Our male pin header connectors can be cut to different lengths according to your needs, easy to break off and solder on..
  • Electric Component: The pcb pin strip plays the function of bridge in the circuit, and takes up the task of current or signal transmission. It is one of the indispensable components of PCB board and circuit board..
  • Wide Application: Straight single row male pin header is widely applied in the computer and breadboard, suit for Arduino, Raspberry pi and other electronic projects..
  • What You Get: Comes with 60pcs male header connecter strips, sufficient quantity to meet your different needs..
Check Stock

SUPERNIGHT LED Light Strip White, 6000K Daylight White Lights 16.4 Ft 300leds 60leds/m 5050 SMD Flexible Non-Waterproof Tape for Boats, Bathroom, Mirror, Ceiling

  • 【SMD 5050 LED Rope Lights】There are 300pcs leds on 16.4ft flexible PCB board.On the back of PCB,there is double-side adhesive tape which can help you install it easier. This SUPERNIGHT strip can work with 12V 5A power supply/dimmer (Not included)..
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more strips..
  • 【Non-waterproof PCB】This 16.4ft length flexible strip is non-waterproof,indoor use only.With better light-admitting quality and heat dispersion than IP65 waterproof strip light..
  • 【Easy to instsall】Strong adhesive tape on the back of the tape can help you easy to install the strip. Please make sure the surface is dry, smooth, no dust..
  • 【SUPERNIGHT Best Service】Please contact with us if our 5050 LED strip light can not work or has other problem, please contact us asap. Professional SUPERNIGHT team would help you solve any problems..
Check Stock

Gikfun DIY SMD SMT Welding Practice Soldering Skill Training Board NE555 CD4017 Water Flowing Led DIY Kit EK1885

  • The circular circuit is the running water lamp circuit, which is composed of CD4017, NE555 and leds, which can be used to work after being welded..
  • Add 2pcs of QFP44 chip, double sided component layout, double welding..
  • High quality PCB, has clearly marked the electronics components, even beginners can easily solder successfully..
  • Please make sure all components in right direction and right place.
  • and check whether pseudo and float welding, this is very important in practicing....
Check Stock