Top Optical Comparators

Fowler 52-641-300-0, Dial Indicator with Flex-Arm Magnetic Base and 1\ Travel

  • Precision Measurements: Features a 2-1/4" diameter dial indicator with 0.001" graduations, a revolution counter, and tolerance markers to observe tolerance limits.
  • Accurate Readings: Dial indicator has microfine graduations for 0-100 continuous readings.
  • magnetic base also has a V-base for mounting on cylindrical surfaces.
  • Magnetic Base: The magnetic base features an on/off switch for an easy magnet release.
  • Set Includes: 2-1/4" dial indicator, flex arm magnetic base, and fitted storage case.
  • Used on lathes, surface plates, milling machines, comparators and various other machining applications.
Check Stock

Juried Engineering LM2903P LM2903 Dual Differential Comparator Automotive Grade Breadboard-Friendly IC DIP-8 (1 Piece)

  • The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
  • Common-mode input voltage range Includes Ground, Low output saturation voltage.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check Stock

Major Brands OP07 General Purpose Single OP Amplifier, -18 Volt, 8-Pin, PDIP, 3.3 mm H x 6.35 mm W x 9.27 mm L (Pack of 10)

  • Two Independent Comparators and Operates from a Single 5-V Supply.
  • Typically 80-ns Response Time at ±15 V and Minimum Fan-out of 2 Each Side.
  • Maximum Input Current of 1 µA Over Temperature.
  • Inputs and Outputs can be Isolated from System Ground.
Check Stock

Juried Engineering LM319N LM319 High Speed Dual Comparator Breadboard-Friendly (Pack of 5)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

Juried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

Texas Instruments LM358P Low Power Dual OP Amplifier, General Purpose, 8-Pin, -16-32 Volt, 9.81 mm L x 6.35 mm W x 4.57 mm H (Pack of 15)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

Small IC and Transistor Assortment Box 60 pcs, NE5532, OP07, LM324, TDA2030, LM386, TDA2822, LM393, LM339, UC3842, UC3843, NE555, ULN2003, PC817, CD4017, LM358, CD4047, ULN2803, J201, BD140, Sockets

  • Small IC and Transistor Assortment: NE5532, OP07, LM324, TDA2030, LM386, TDA2822, LM393, LM339, UC3842, UC3843, NE555, ULN2003, PC817, CD4017, LM358, CD4047, ULN2803, J201, BD140.
  • Including DIP8, DIP14, DIP16, DIP18 Sockets.
  • 19 different types, 60 pcs ICs, 6 pcs Transistors, 28 pcs Sockets.
  • Contains various usefull IC and Transistor types such as: Opamps, JFET and Power Transistors, Voltage Comparators, Photocouplers, Timers Oscillators, PWM Controllers, Voltage Converters, Darlington Arrays, Class A/B Audio Amplifiers, Logic Chips.
  • Sorted accordingly in a labeled plastic box.
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

Optical Audio Extension Cable VANAUX Optical Female to Male 90 Degree SPDIF Toslink Cable 1m/3.2ft

  • [ Optical Female to Male 90-Degree Optical Cable ] - This optical extension cable can extend the Optical Female interface on your beloved device to a....
  • [ L-Shaped & 360 Rotating Design] - With 90 degree and 360 degree free-rotating designed plug, this optical cable will be perfect in narrow space and....
  • [ Hi-Fi Sound Quality ] - Based on premium optic fiber core, deliver optimal sound signal, stable and receive no RFI or EMI signal interference..
  • [ Widely compatible ] - VANAUX optical audio extention cable is compatible with CD/DVD, Blue-Ray Players, PS3/4, Xbox 360, Xbox One, Smart TV, Plasma....
  • [ What You Get ] - 1 * VANAUX 90 Degree Optical Male to Female Optical Extension Cable, hassle-free 12-month warranty and friendly 24/7 customer....
Check Stock

Digital Audio Optical Audio Switch 2 in 1 Out, SGEYR Digital Optical Audio Splitter SPDIF Toslink Switch Optical Switcher with IR Remote Control & Optical Cable for PS3 Xbox Blue-Ray HDTV

  • 【Digital Audio Optical Cable Splitter】Two ways of optical fiber SPDIF Toslink signals switch to one sets of optical fiber signal receiving device. Optical splitter makes with metal material for sturdy and anti-interference. Plug and Play. Powered audio optical splitter is more stable than passive SPDIF/TOSLINK splitter(Please supply power before use, or use a signal source to supply power). Comes with a 5V power adapter for stedy charging.
  • 【Long Output Distance】Lossless sound quality transmission. Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m/130ft. With Power Indicator LED, LED Clearly Indicate the Working State of the Splitter. Digital optical switches can be Selected via IR Remote Control(Included) or Button on the Switch.
  • 【Support Audio Format】Optical cable splitter support LPCM2.0 / DTS / Dolby-AC3, 32kHz, 44. 1kHz, 48kHz and 96kHz. Optical fiber audio aplitter does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD. Support Signal Retiming.
  • 【Widely Compability】The input port work with two Optical audio signal, such as PS3, PS4, Xbox, Blue-Ray DVD, HDTV, STB, Xbox, TV box, DVD player, and More. The output work with one sets of optical audio signal receiving device such as soundbar/digital amplifer, di....
Check Stock

Optical Cable Splitter, VIMVIP Toslink Digital Fiber Optical Audio Splitter 2 Way in/Out Optical Splitter Adapter(Black)

  • 【Application】: This 1 in 2 out optical splitter is compatible with CD/DVD/PS3/PS4/Xbox 360/Xbox one/Xbox One S..
  • 【1 in 2 Out】: VIMVIP TosLink 1 x 2 Optical Audio Splitter Adapter allows you to connect one toslink optical digital audio source and split into two different receiving devices such as a A/V receiver and a television..
  • 【Well Made】: The optical cable splitter adopted 24k Gold Connector, low-loss Fiber optic, low-jitter synthetic fiber and metal connectors bring excellent sound quality experience. Ideal optical digital splitter adapter for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder..
  • 【Note】: The digital optical fiber splitter supports 1 male input to 2 female outputs at the same time.
  • But please note that it can’t support 2 female input to 1 male out at the same time. when 2 female inputs to 1 male output, please turn off one female inputs device, because 2 female inputs can‘t work at the same time, otherwise this optical audio splitter will interfere and cause noise..
  • 【What You Get】: 1x VIMVIP Toslink Digital Fiber Optical Audio Splitter 2 Way in/out Optical Splitter Adapter(Black).
  • And our friendly 12 months warranty service..
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....
Check Stock