Top Optics Laser Cutting System

Gogogo Sport Vpro Golf & Hunting Range Finder - Laser Rangefinder for Distance Measuring with High-Precision Flag Pole Locking Vibration Function︱Slope Mode Continuous Scan

  • 【Pinsensor & Vibration & Slope Technology】-- With Pinsensor technology to accurately measure overlapping subjects, When the flag distance is....
  • 【Laser Rangefinder for Golf】-- Class 1, 905nm laser type, 6X Magnification, 7-degree field angle, distance range 5-650 yds, 150+yds to Flagpole.....
  • 【3 Mode & Easy to Use】-- 3 Mode to Choice: Scan Mode, Golf Mode and Speed Mode: Normal Scan Mode is for distance measurements when you hold down....
  • 【Clear Optics】-- Our golf distance range finder with clear optics. Fully multi-coated optics lenses effectively reduce reflected light and....
  • 【Full Accessories and 100% Satisfaction Promise】-- Complete golf laser range finders set, including 1x Rangefinder, 1x Carrying Pouch, 1x CR2....
Check Stock

SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life

  • ...eds to be manually turned off when engraving, otherwise it will destroy the engraving pattern or text. The S30 series comes standard with a 32-bit air-assist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to mistakes..
  • Powerful 5W Dual Laser Output: The S30 laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 5mm balsa wood and 3mm plywood in 1 pass. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
  • Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to ....
Check Stock

Astromania Alignment 1.25

  • Output power: less than 5mw, much safer for your eyes. This sturdy laser unit allows you to swiftly and precisely collimate your Newtonian telescope. Only when the optics have been accurately collimated can the telescope offer you its full performance..
  • Accurate collimation in a few minutes provide a more clearer image. The telescope can be collimated by just one person..
  • This adjustment tool can be used in all 1.25″ focusers. We provide you with precise instructions in German and English, with a step-by-step explanation of how to adjust a Newtonian telescope using this laser unit. So, even if you are a newcomer to amateur astronomy, it is very simple to get the optimum performance out of your telescope..
  • The precision-made aluminium housing of the laser unit has a front opening from which the laser beam can be emitted. In order to obtain an optimal adjustment, it has a side window allowing a disk oriented at 45° with a central hole to be viewed.This can be then later be used to see whether the laser is reflected back on itself, indicating well collimated optics..
  • The laser comes fully adjusted. It can however be further adjusted if required. It has three openings for adjustment, arranged at 120°, which are initially sealed. The battery for the ....
Check Stock

Monstrum Red Laser Sight System with Picatinny Mount for Mossberg 500/590/835/930/Shockwave Series Shotguns

  • Red laser sighting system built specifically for the Mossberg 500/590/835/930/Shockwave Series Shotgun platforms.
  • Designed for rapid target acquisition in close quarters environments, when speed and visibility counts.
  • Powerful 5 milliwatt laser module can be used in a variety of lighting conditions out to a distance of 50+ yards.
  • Comes with an integrated Picatinny mount that allows for the mounting of Picatinny standard scopes, red dots, and other optics.
  • Installs directly into the Mossberg factory mounting holes on the top of the receiver and is ready to use in minutes.
Check Stock

Green Blob Outdoors Keymod (9 Slot) Picatinny Weaver Rail Section Aluminum

  • Made of durable aircraft grade aluminum with anodized finishing..
  • 9 slot picatinny / Weaver / 20mm top rail section for KeyMod handguard system..
  • Ideal for attaching lights, laser, optics, and forward grips..
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

  • ...lating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing.
  • 【Extensive Software Compatibility】 ....
Check Stock

Gosky 1.25'' Metal Laser Collimator for Reflector Telescope Collimation - Adjustable 7 Brightness Levels

  • Designed for Reflector telescope, fit for standard 1.25 inch diameter. Red laser collimation beam with 7 brightness levels, wavelength 635-655 nm.
  • Output power: less than 5mw, much safer for your eyes. This sturdy laser unit allows you to swiftly and precisely collimate your Newtonian telescope. Only when the optics have been accurately collimated can the telescope offer you its full performance..
  • The precision-made aluminium housing of the laser unit has a front opening from which the laser beam can be emitted. In order to obtain an optimal adjustment, it has a side window allowing a disk oriented at 45° with a central hole to be viewed.This can be then later be used to see whether the laser is reflected back on itself, indicating well collimated optics..
  • Built with metal material. CR2032 Lithium Cell battery (Not include).
  • Accurate collimation in a few minutes provide a more clearer image. The telescope can be collimated by just one person..
  • The laser comes fully adjusted. It can however be further adjusted if required. It has three openings for adjustment, arranged at 120°, which are initially sealed. The battery for the laser can be exchanged at any time.
  • the small screw cap at the rear of the laser must be first unscrewed to allow this..
Check Stock

LIVANS American Flag USA Reflective Patch, Tactical Vest Reversed Patch for Left/Right Shoulder of Laser Precision Cuting Fit for Uniform, Tactical Vest, Police, Airsoft, Cap Hat

  • HIGH REFLECTIVE MATERIAL: Tactical Flag Patch adopts 3M non-metalized micro-prismatic retroreflective sheeting. Better daytime and nighttime brightness than common grade with beaded optics..
  • LASER CUT TECH: Tactical patch is made by precision cutting and bonding process on 500D nylon, make the edge of the pattern is neat and exquisite, built for maximum durability and use..
  • HOOK-FASTENER BACKING WITH USA Patch with hook and loop system allows you easily attachment to jacket, molle bags, operator caps, backpacks, and uniforms..
  • LEFT OR RIGHT SHOULDER YOU CAN CHOOSE: The package includes two left/right styles that allow you to change your patches freely on your shoulder when you wearing a jacket, uniform, and coat..
  • UNIVERSAL SIZED 2"*3.25": Perfect size for attaching to uniforms and the military. Loop backing makes them easy to take off before washes, increasing its durability. We offer 30-days money back of quality guarantee..
Check Stock

SCULPFUN S30 Pro 10W Laser Engraver with Auto Air Assist Pump & Nozzle, Cleaner and Faster Laser Cutter, Higher Accuracy Laser Engraving Machine, 10x Service Life, 36.8"x35.6" Expandable Working Area

  • ...eds to be manually turned off when engraving, otherwise it will destroy the engraving pattern or text. The S30 series comes standard with a 32-bit air-assist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to forgetting..
  • Powerful 10W Dual Laser Output: The S30 Pro laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 10mm wood and 5mm black acrylic in 1 pass. Capable of cutting high density materials such as 10mm walnut and 6mm MDF. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
Check Stock

Simple Hollowing System with Laser - Stabilizes and Guides Woodturning Tools while Hollowing Wood, Accepts Full-Size Simple Woodturning Tools. (SHS with Laser)

  • WHATS INCLUDED: The articulating arm, the base mounting kit and the laser assembly. No tool are included in this kit..
  • WHAT DOES IT DO? Stabilizes and guides woodturning tools while hollowing and finishing giving you a confidence and ease of turning you never thought possible..
  • HOW DOES IT WORK? Silky smooth motion, stability and precise tool control means you’re free to concentrate on creativity with no worries of catches or vibrations while hollowing..
  • WHAT DOES THE LASER DO? Guides you to precise wall thickness at all times. Eliminates worries of cutting through the wall just as your bowl is complete. The commercial quality laser is set so the laser light is offset from the cutting tip by the desired wall thickness of the vessel. When you begin hollowing the laser points mostly to the middle of the vessel. As the vessel is hollowed and the cutting tip moves outward the laser light follows..
  • HOW AND WHERe IS IT MADE? The entire Simple Hollowing System is made by Harrison Specialties in the Land of 10,000 lakes, Minnesota. All components are precision machined on an American made Haas CNC milling machine..
Check Stock

GENERAL INTERNATIONAL 7-1/4" Compound Sliding Miter Saw - 10A Dual Slide Rail Chop Saw with 0-45° Bevel & Laser Alignment System - MS3002

  • 7.25 INCH COMPOUND MITER SAW - This powerful yet compact saw features a 7.25" carbide tooth blade for fast, easy cross-cutting of dimensional lumber as large as 2x8.
  • POWERFUL 10 AMP MOTOR - Powered by a robust 10 amp motor this miter saw has a max no load speed of 5000 RPM and is capable of cutting through some of the toughest job site materials..
  • BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work..
  • ACCURATE LASER GUIDED CUTTING - When precision is key to your jobs success, look to the integrated laser alignment system to help you produce fast, accurate cuts ..
  • DUAL RAIL SLIDING SYSTEM - The two rail sliding system enhances rigidity and provides extra capacity when making long crosscuts, miter cuts and bevel cuts..
Check Stock

FLAGPOWER 420 Lumens Pistol Light Weapon Light with Strobe Function Laser Light Combo, Magnetic USB Rechargeable Tactical Flashlight Gun Light for Airsoft Handguns Pistol Rifle

  • BRIGHT FLASHLIGHT LASER COMBO: High quality Cree XML2 LED, 208m beam up to 1200 lumens. TIR optics produces a concentrated beam with optimum peripheral illumination. It is much brighter than most other similar models pistol light..
  • 5 DIFFERENT LIGHTING MODES: The green laser flashlight combo has 5 modes : FLASHLIGHTONLY / LASER ONLY / STROBE ONLY/FLASHLIGHT + LASER/STROBE+LASER. The laser and flashlight can be used in combination at night, so that you can accurately aim at the target..
  • Magnetic Charging:Powered by rechargeable 500mAh/102026 Lithion battery with USB cable, can charged by common mobile phone charger.Ensuring a max runtime of 120 minutes when the light is set to 420 lumens..
  • Adjustable Rail and Risk Free Shopping Experience: This weapon light and laser combo fits rail-equipped pistols, rifles, shotguns and handguns,Please confirm the rail sizes greater than 1.18in./28mm. 60 days money back and 18-mouth manufacturer’s support!.
Check Stock