Top Orion Cobalt 12

TEMO M35 Cobalt Spiral Flute Step Drill 12 Size From 3/16 Inch To 7/8 Inch 1/4 Inch Hex Shank

  • M35 cobalt step drill 1/4" (6.35mm) hex shank 12 hole 3/16" (4.76mm) to 7/8" (22.22mm).
  • 12 hole sizes: 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.94mm), 3/8" (9.52mm), 7/16" (11.11mm), 1/2" (12.7mm), 9/16" (14.29mm), 5/8" (15.88mm), 11/16" (17.46mm) , 3/4" (19.05mm), 13/16" (4.76mm), 7/8" (22.22mm) with 1/16" (1.59mm) increments. The size marks are stamped next to each step to ease the use..
  • double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

Orion Skyline 8' Dobsonian Reflector Telescope Kit

  • This 8" Dobsonian telescope comes "fully loaded" with a great set of accessories and top-notch features.
  • Azimuth roller bearings and adjustable altitude trunnions provide silky-smooth telescope motion and precision 2" Crayford focuser features dual-speed adjustment control with 10:1 fine-focus.
  • Includes an 8x50 right-angle finder scope, cooling fan, eyepiece rack, and more!.
  • Special Kit includes Orion Deep Map, Orion 2" UltraBlock Filter, Orion 1.25" Variable Polarizing Filter, Orion Planetary Observing Guide Kit, and Orion SteadyPix Quick Smartphone Telescope Photo Adapter.
Check Stock

Ozonics HR-300 / Orion Scent Elimination Device Standard Battery

  • Battery Life: - (Hyperboost Mode) 3 Hours for Orion - (Boost Mode) 4 Hours for HR-300/Orion - (Standard Mode) 5 Hours for HR-300/Orion.
  • Smart Battery Technology, Charge Time: 2-3 Hours.
Check Stock

Logitech G910 Orion Spectrum RGB Wired Mechanical Gaming Keyboard , Black

  • Exclusive Romer-G Mechanical Switches Exclusive Romer-G mechanical switches make Orion Spectrum our fastest keyboard ever. 1. 5mm actuation makes it possible for Orion Spectrum to receive input up to 25 percent faster than leading competitors, with 40 percent more durability at 70 million keystrokes..
  • Intelligent RGB Illumination Customize Orion Spectrum’s RGB illumination from a palette of up to 16 million colors. Customize key illumination for specific games or game events. Each key top is entirely illuminated with 16MM color lighting for a beautiful, evenly lit glow..
  • Arx Control Integration Smartphones and tablets can be connected to Orion Spectrum using the adjustable Smart Dock. Arx Control makes it possible for mobile devices to display in-game display information, vital system statistics and more..
  • 9 Customizable G-keys Orion Spectrum’s 9 fully-customizable G-keys can be assigned commands per profile, and have been positioned for optimal speed and accessibility..
  • Dedicated Media Controls Orion Spectrum’s dedicated media controls can be used to play, pause, and mute songs and videos. Use the on-board roller bar to adjust the volume, or skip scenes at the touch of a button..
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.
Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.
Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.
Check Stock

Telrad Finder Sight Red / Green Switchable with Mounting Base

  • Allows you to attach an Orion finder scope bracket, reflex sight bracket, or green laser pointer bracket to Schmidt-Cassegrain telescopes (SCT) up to 11 inch aperture.
  • Designed to accept any Orion finder scope bracket, EZ Finder II and EZ Finder Deluxe reflex sight brackets, and Orion's SkyLine Deluxe Green Laser Pointer bracket.
  • Also lets you attach a second or third aiming device to your Schmidt-Cassegrain for multiple aiming options.
  • Fits factory drilled holes on Celestron, Meade, and Orion Schmidt-Cassegrain telescopes.
  • Attaches directly to Schmidt-Cassegrain Telescope (SCT) optical tube with included mounting hardware.
Check Stock

Cowboystudio Timer Remote Control Shutter for Canon EOS

  • The Orion Dew Zapper Pro is an advanced 12-volt DC dew prevention and elimination system which can power up to four heating bands to prevent dew accumulation on all your optics (heating bands sold separately).
  • Microprocessor-controlled circuitry delivers pulse-width modulation for precise temperature control of up to four heating bands.
  • Each heater output has its own temperature control knob with adjustment from 0% to 100% so you can set each one to your preference.
  • Heating bands are power-efficient, drawing only 0.25 amps to 2.8 amps at maximum output (heating bands sold separately).
  • Don't let dew dampen your spirits, or your telescope optics, get the made in the U.S.A. Orion Dew Zapper Pro today.
Check Stock

TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch To 3/4 Inch, 3/8 Inch Shank

  • TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch (6.4 mm) To 3/4 Inch (19 mm), 3/8 Inch (9.5mm) Shank.
  • 9 hole sizes: 1/4″ (6.35mm), 5/16″ (7.94mm), 3/8″ (9.52mm), 7/16″ (11.11mm), 1/2″ (12.7mm), 9/16″ (14.29mm), 5/8″ (15.88mm), 11/16″ (17.46mm), 3/4″ (19.05mm), with 1/16″ (1.59mm) increments. 3/8 Inch Shank with 3 flats to eliminate slipping.
  • Double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

Stringjoy DRP13 Signature Nickel Electric Guitar Strings, (Drop Tune Extra Heavy Gauge - 13-68)

  • Cobalt produces a stronger magnetic relationship between pickups and strings than any other alloy previously available.
  • Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
  • Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
  • Not Even Slinky’s 12-56 gauge is optimal for detuning.
  • Made in California, USA with the finest and freshest materials.
Check Stock